U-Boot 2017.09-rc1-g597daa3 (Aug 06 2018 - 14:56:38 +0800)
CPU: i.MX RT105x at 528MHz
Model: NXP i.RT1050 EVK
DRAM: 32 MiB
MMC: FSL_SDHC: 0
SF: Detected w25q128bv with page size 256 Bytes, erase size 64 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
Video: 480x272x24
In: serial@40184000
Out: serial@40184000
Err: serial@40184000
Net: eth0: ethernet@402D8000
Hit any key to stop autoboot: 0
SF: Detected w25q128bv with page size 256 Bytes, erase size 64 KiB, total 16 MiB
device 0 offset 0x80000, size 0x400000
SF: 4194304 bytes @ 0x80000 Read: OK
device 0 offset 0x70000, size 0x10000
SF: 65536 bytes @ 0x70000 Read: OK
## Booting kernel from Legacy Image at 80007fc0 ...
Image Name: Linux-4.5.0-g50baef1-dirty
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 3032352 Bytes = 2.9 MiB
Load Address: 80008000
Entry Point: 80008001
Verifying Checksum ... OK
## Flattened Device Tree blob at 81000000
Booting using the fdt blob at 0x81000000
XIP Kernel Image ... OK
Loading Device Tree to 81e67000, end 81e6cbb2 ... OK
Starting kernel ...
Booting Linux on physical CPU 0x0
Linux version 4.5.0-g50baef1-dirty (bluesky@developer-RH2485-V2) (gcc version 4.7.4 20130508 (prerelease) (20170818-165657- build on build.emcraft by build) ) #76 Mon Aug 6 15:12:10 CST 2018
CPU: ARMv7-M [411fc271] revision 1 (ARMv7M), cr=00000000
CPU: WBA data cache, WBA instruction cache
Machine model: NXP IMXRT1050 board
Built 1 zonelists in Zone order, mobility grouping off. Total pages: 8128
Kernel command line: rootfstype=jffs2 root=/dev/mtdblock4 rw
PID hash table entries: 128 (order: -3, 512 bytes)
Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
Memory: 28324K/32768K available (2343K kernel code, 113K rwdata, 432K rodata, 72K init, 94K bss, 4444K reserved, 0K cma-reserved)
Virtual kernel memory layout:
vector : 0x00000000 - 0x00001000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0x00000000 - 0xffffffff (4095 MB)
lowmem : 0x80000000 - 0x82000000 ( 32 MB)
.text : 0x80008000 - 0x802bdde8 (2776 kB)
.init : 0x802be000 - 0x802d0000 ( 72 kB)
.data : 0x802d0000 - 0x802ec520 ( 114 kB)
.bss : 0x802ec520 - 0x80303f7c ( 95 kB)
NR_IRQS:16 nr_irqs:16 16
sched_clock: 32 bits at 75MHz, resolution 13ns, wraps every 28633115129ns
clocksource: vf-pit: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 25483472618 ns
Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256)
pid_max: default: 4096 minimum: 301
Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
imxrt105x-pinctrl 40a8000.iomuxc_snvs: initialized IMX pinctrl driver
imxrt105x-pinctrl 401f8000.iomuxc: initialized IMX pinctrl driver
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
PTP clock support registered
clocksource: Switched to clocksource vf-pit
NET: Registered protocol family 2
TCP established hash table entries: 1024 (order: 0, 4096 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 1024 bind 1024)
UDP hash table entries: 256 (order: 0, 4096 bytes)
UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
futex hash table entries: 16 (order: -5, 192 bytes)
jffs2: version 2.2. (NAND) 漏 2001-2006 Red Hat, Inc.
fuse init (API version 7.24)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 251)
io scheduler noop registered
io scheduler cfq registered (default)
mxsfb 402b8000.lcdif: initialized
40184000.serial: ttyLP0 at MMIO 0x40184000 (irq = 44, base_baud = 375000) is a FSL_LPUART
Serial: Console lpuart rounded baud ratefrom 187500 to 115200
console [ttyLP0] enabled
40188000.serial: ttyLP1 at MMIO 0x40188000 (irq = 45, base_baud = 375000) is a FSL_LPUART
Serial: VF610 driver
fsl-flexspi 402a8000.flexspi: w25q128 (16384 Kbytes)
5 ofpart partitions found on MTD device 402a8000.flexspi
Creating 5 MTD partitions on "402a8000.flexspi":
0x000000000000-0x000000050000 : "uboot"
0x000000050000-0x000000070000 : "uboot_env"
0x000000070000-0x000000080000 : "dtb"
0x000000080000-0x000000480000 : "kernel"
0x000000480000-0x000001000000 : "rootfs"
libphy: fec_enet_mii_bus: probed
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-mxc: Freescale On-Chip EHCI Host driver
usbcore: registered new interface driver cdc_acm
cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
ci_hdrc ci_hdrc.0: doesn't support gadget
ci_hdrc ci_hdrc.0: EHCI Host Controller
ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 1
ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
ci_hdrc ci_hdrc.1: EHCI Host Controller
ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 2
ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 1 port detected
i2c /dev entries driver
input: TSC2007 Touchscreen as /devices/platform/soc/soc:aips-bus@40000000/403f0000.lpci2c/i2c-0/0-0048/input/input0
rtc-rx8010 0-0032: Frequency stop was detected
rtc-rx8010 0-0032: Frequency stop detected
rtc-rx8010 0-0032: rtc core: registered rx8010 as rtc0
i2c i2c-0: LPI2C adapter registered
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
sdhci-pltfm: SDHCI platform and OF driver helper
sdhci-esdhc-imx 402c0000.esdhc: could not get default state
/soc/aips-bus@40000000/esdhc@402c0000: voltage-ranges unspecified
mmc0: SDHCI controller on 402c0000.esdhc [402c0000.esdhc] using DMA
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
NET: Registered protocol family 17
input: gpio-keys as /devices/platform/gpio-keys/input/input1
rtc-rx8010 0-0032: Frequency stop detected
rtc-rx8010 0-0032: hctosys: unable to read the hardware clock
VFS: Mounted root (jffs2 filesystem) on device 31:4.
devtmpfs: mounted
Freeing unused kernel memory: 72K (802be000 - 802d0000)
init started: BusyBox v1.24.2 (2018-08-06 15:10:58 CST)
/ #
