1.源码实现
using Plots
using LaTeXStrings
default(size = (600, 600), legend = false)
L = 4.0
p = plot(xlims = (-L, L), ylims = (-L, L),
aspect_ratio = 1, framestyle = :none,
grid = false, xticks = false, yticks = false,
tickfontsize = 0, guidefontsize = 0)
plot!(p, [-L, L], [0, 0], color = :black, lw = 2, arrow = :closed, label = "")
plot!(p, [0, 0], [-L, L], color = :black, lw = 2, arrow = :closed, label = "")
# 斜体数学符号 + 衬线体,字号加大
xlab = text(L"x", :black, 16, "Computer Modern")
ylab = text(L"y", :black, 16, "Computer Modern")
Olab = text(L"O", :black, 16, "Computer Modern")
annotate!(p, L - 0.15, -0.25, xlab) # x 放在右端轴下方
annotate!(p, -0.25, L - 0.15, ylab) # y 放在上端轴左侧
annotate!(p, -0.25, -0.25, Olab) # O 放在原点左下
# ===== 阴影:圆环 1 < |z| < 2 =====
Rout, Rin = 2.0, 1.0 # 外、内半径
spacing = 0.2
EPS = 1e-9
m = 1.0; A = 1 + m^2
# 直线 y=mx+b 与圆 x²+y²=r² 的交点 x 区间;无交返回 nothing
function circle_xs(r, m, b, A)
C = b*b - r*r
disc = (2m*b)^2 - 4A*C # 等价于 4A r² - 4b²
disc <= 0 && return nothing
rq = sqrt(disc) / (2A)
xc = -m*b / A
return (xc - rq, xc + rq)
end
bmax = Rout * sqrt(1 + m^2) # 只需覆盖外圆
nsteps = Int(ceil(bmax / spacing))
xs_sh = Float64[]; ys_sh = Float64[]
for k in -nsteps:nsteps
b = k * spacing
out = circle_xs(Rout, m, b, A) # 外圆内区间
out === nothing && continue
lo, hi = out
inner = circle_xs(Rin, m, b, A) # 内圆(要挖掉)
if inner === nothing
append!(xs_sh, [lo, hi, NaN]); append!(ys_sh, [m*lo+b, m*hi+b, NaN])
else
i1, i2 = inner
for (xl, xr) in ((lo, min(hi, i1)), (max(lo, i2), hi))
xl < xr - EPS || continue
append!(xs_sh, [xl, xr, NaN]); append!(ys_sh, [m*xl+b, m*xr+b, NaN])
end
end
end
plot!(p, xs_sh, ys_sh, color = :black, lw = 1.0, label = "")
# 内外圆边界
θ = range(0, 2π, length = 300)
plot!(p, Rout .* cos.(θ), Rout .* sin.(θ), linecolor = :black, lw = 1.5, label = "")
plot!(p, Rin .* cos.(θ), Rin .* sin.(θ), linecolor = :black, lw = 1.5, label = "")
# ---- 刻度线:-3 到 3(跳过 0,原点不画刻度)----
ts, h = -3:3, 0.12 # h 为刻度线半长
for t in ts
t == 0 && continue
plot!(p, [t, t], [0, h], color = :black, lw = 1.2, label = "") # x 轴刻度
plot!(p, [0, h], [t, t], color = :black, lw = 1.2, label = "") # y 轴刻度
end
# ---- 数字标签 ----
for t in ts
t == 0 && continue
annotate!(p, t, -0.25, text(string(t), :black, 15, "Computer Modern")) # x 轴数字在轴下方
annotate!(p, -0.25, t, text(string(t), :black, 15, "Computer Modern")) # y 轴数字在轴左侧
end
savefig(p, "annulus_1_2.png.png")
2.结果展示

annulus_1_2.png.png