前提：
在本文中，主要介绍从源代码安装Nginx、PHP、Mysql，这篇教程是基于CentOS7 64bit系统来安装的，非Centos系统不适用。现在我们就开始吧！
目录：
1.Nginx安装配置
2.PHP7安装配置
3.MySQL5.7安装配置
1、Nginx安装配置
1.1 安装前工作
首先更新系统软件源，使用以下命令更新系统
[root@VM-0-11-centos ~]# yum update
依赖包安装
[root@VM-0-11-centos ~]# yum -y install gcc gcc-c++ autoconf automake libtool make cmake
[root@VM-0-11-centos ~]# yum -y install zlib zlib-devel openssl openssl-devel pcre-devel
1.2 下载Nginx安装源文件
源码下载，可官网下载地址：http://nginx.org/en/download.html 下载并上传到服务器(这里推荐选择最新稳定版）
或直接在服务上执行以下命令下载
[root@VM-0-11-centos ~]# cd /usr/local/src
[root@VM-0-11-centos src]# wget -c http://nginx.org/download/nginx-1.10.3.tar.gz
解压上面下载的文件
[root@VM-0-11-centos src]# tar zxvf nginx-1.18.0.tar.gz
在编译之前还要做一些前期的准备工作，如：依懒包安装，Nginx用户和用户组等。
1.3 新建nginx用户及用户组
[root@VM-0-11-centos src]# groupadd nginx
[root@VM-0-11-centos src]# useradd -g nginx -M nginx
修改/etc/passwd，使得nginx用户无法bash登陆(nginx用户后面由/bin/bash改为/sbin/nologin)
[root@VM-0-11-centos src]# vi /etc/passwd
然后找到有 nginx 那一行，把它修改为(后面由/bin/bash改为/sbin/nologin)：
nginx:x:1002:1003::/home/nginx:/sbin/nologin
1.4 编译配置、编译、安装
下面我们进入解压的nginx源码目录：/usr/local/src/ 执行以下命令
[root@VM-0-11-centos ~]# cd /usr/local/src/nginx-1.18.0.tar.gz
[root@VM-0-11-centos nginx-1.18.0]# pwd
/usr/local/src/nginx-1.18.0
[root@VM-0-11-centos nginx-1.18.0]#
[root@VM-0-11-centos nginx-1.18.0]# ./configure --prefix=/usr/local/nginx \
--pid-path=/usr/local/nginx/run/nginx.pid \
--with-http_ssl_module \
--user=nginx \
--group=nginx \
--with-pcre \
--without-mail_pop3_module \
--without-mail_imap_module \
--without-mail_smtp_module
注意：上面的反斜杠
\表示换行继续。
--prefix=/usr/local/nginx指定安装到/usr/local/nginx目录下。
上面配置完成后，接下来执行编译
[root@VM-0-11-centos nginx-1.18.0]# make
[root@VM-0-11-centos nginx-1.18.0]# make install
... ...
cp conf/nginx.conf '/usr/local/nginx/conf/nginx.conf.default'
test -d '/usr/local/nginx/run' \
|| mkdir -p '/usr/local/nginx/run'
test -d '/usr/local/nginx/logs' \
|| mkdir -p '/usr/local/nginx/logs'
test -d '/usr/local/nginx/html' \
|| cp -R html '/usr/local/nginx'
test -d '/usr/local/nginx/logs' \
|| mkdir -p '/usr/local/nginx/logs'
make[1]: Leaving directory `/usr/local/src/nginx-1.18.0'
[root@VM-0-11-centos nginx-1.18.0]#
等待片刻
查看安装后的程序版本：
[root@VM-0-11-centos nginx-1.18.0]# /usr/local/nginx/sbin/nginx -v
nginx version: nginx/1.18.0
修改Nginx默认端口(可选)：
[root@VM-0-11-centos nginx-1.18.0]# vi /usr/local/nginx/conf/nginx.conf
找到
... ...
#gzip on;
server {
listen 80;
server_name localhost;
#charset koi8-r;
... ...
把上面的 80 修改为你想要的端口，如：8080 。(这里推荐不去修改，默认80即可)
修改配置后验证配置是否合法：
[root@VM-0-11-centos nginx-1.18.0]# /usr/local/nginx/sbin/nginx -t
nginx: the configuration file /usr/local/nginx/conf/nginx.conf syntax is ok
nginx: configuration file /usr/local/nginx/conf/nginx.conf test is successful
启动Nginx程序、查看进程
[root@VM-0-11-centos nginx-1.18.0]# /usr/local/nginx/sbin/nginx
[root@VM-0-11-centos nginx-1.18.0]# ps -ef | grep nginx
root 29151 1 0 22:01 ? 00:00:00 nginx: master process /usr/local/nginx/sbin/nginx
nginx 29152 29151 0 22:01 ? 00:00:00 nginx: worker process
root 29154 2302 0 22:01 pts/0 00:00:00 grep --color=auto nginx
[root@VM-0-11-centos nginx-1.18.0]#
nginx停止、重启
# nginx 管理的几种方式 -
# 启动Nginx
/usr/local/nginx/sbin/nginx
# 从容停止Nginx：
kill -QUIT 主进程号 # 如上一步中的 ps 命令输出的 29151，就是 Nginx的主进程号
# 快速停止Nginx：
kill -TERM 主进程号
# 强制停止Nginx：
pkill -9 nginx
# 平滑重启nginx（推荐）
/usr/nginx/sbin/nginx -s reload
现在我们来看看安装的Nginx的运行结果，可以简单地使用curl命令访问localhost测试或者打开浏览访问目标服务器的IP
[root@VM-0-11-centos nginx-1.18.0]# curl localhost
<!DOCTYPE html>
<html>
<head>
<title>Welcome to nginx!</title>
<style>
body {
width: 35em;
margin: 0 auto;
font-family: Tahoma, Verdana, Arial, sans-serif;
}
</style>
</head>
<body>
<h1>Welcome to nginx!</h1>
<p>If you see this page, the nginx web server is successfully installed and
working. Further configuration is required.</p>
<p>For online documentation and support please refer to
<a href="http://nginx.org/">nginx.org</a>.<br/>
Commercial support is available at
<a href="http://nginx.com/">nginx.com</a>.</p>
<p><em>Thank you for using nginx.</em></p>
</body>
</html>
[root@VM-0-11-centos nginx-1.18.0]#
image.png
提示： 如果没有看到以上界面，在确保Nginx启动的前提下，检查SeLinux和防火墙是否已关闭。关闭防火墙命令：sudo systemctl stop firewalld。
2. PHP7安装配置
2.1 源码下载
压缩包下载
[root@VM-0-11-centos ~]# cd /usr/local/src
[root@VM-0-11-centos src]# wget -c http://cn2.php.net/distributions/php-7.1.3.tar.gz
注：由于访问外网，压缩包下载速度过慢，这里我们可以使用mwget下载压缩包，这里不具体阐述，请自行安装mwget
解压压缩包：
[root@VM-0-11-centos src]# tar -xzvf php-7.1.3.tar.gz
2.2 安装编译所需依赖包
[root@VM-0-11-centos src]# cd php-7.1.3
[root@VM-0-11-centos php-7.1.3]# yum -y install libxml2 libxml2-devel openssl openssl-devel curl-devel libjpeg-devel libpng-devel freetype-devel libmcrypt-devel
或者常见大部分依懒包安装
[root@VM-0-11-centos php-7.1.3]# yum install -y wget gcc gcc-c++ autoconf libjpeg libjpeg-devel perl perl* perl-CPAN libpng libpng-devel freetype freetype-devel libxml2 libxml2-devel zlib zlib-devel glibc glibc-devel glib2 glib2-devel bzip2 bzip2-devel ncurses ncurses-devel curl curl-devel e2fsprogs e2fsprogs-devel krb5 krb5-devel libidn libidn-devel openssl openssl-devel openldap openldap-devel nss_ldap openldap-clients openldap-servers png jpeg autoconf gcc cmake make gcc-c++ gcc ladp ldap* ncurses ncurses-devel zlib zlib-devel zlib-static pcre pcre-devel pcre-static openssl openssl-devel perl libtoolt openldap-devel libxml2-devel ntpdate cmake gd* gd2 ImageMagick-devel jpeg jpeg* pcre-dev* fontconfig libpng libxml2 zip unzip gzip
2.3 源码编译、安装
通过 ./configure –help 查看支持的编译配置参数，如下所示
[root@VM-0-11-centos php-7.1.3]# ./configure --help
`configure' configures this package to adapt to many kinds of systems.
Usage: ./configure [OPTION]... [VAR=VALUE]...
To assign environment variables (e.g., CC, CFLAGS...), specify them as
VAR=VALUE. See below for descriptions of some of the useful variables.
Defaults for the options are specified in brackets.
Configuration:
-h, --helpdisplay this help and exit
--help=short display options specific to this package
--help=recursive display the short help of all the included packages
-V, --versiondisplayversion information and exit
-q, --quiet, --silent do not print `checking ...' messages
--cache-file=FILE cache test results inFILE [disabled]
-C, --config-cache alias for `--cache-file=config.cache'
-n, --no-create do not create output files
--srcdir=DIR find the sources inDIR [configure dir or `..']
Installation directories:
--prefix=PREFIX install architecture-independent files in PREFIX
[/usr/local]
--exec-prefix=EPREFIX install architecture-dependent files in EPREFIX
[PREFIX]
By default, `make install' will install all the files in
`/usr/local/bin', `/usr/local/lib' etc. You can specify
an installation prefix other than `/usr/local' using `--prefix',
for instance `--prefix=$HOME'.
For better control, use the options below.
PHP+Nginx组合的编译配置命令
[root@VM-0-11-centos php-7.1.3]# ./configure --prefix=/usr/local/php7 \
--with-config-file-path=/usr/local/php7/etc \
--with-config-file-scan-dir=/usr/local/php7/etc/php.d \
--with-mcrypt=/usr/include \
--enable-mysqlnd \
--with-mysqli \
--with-pdo-mysql \
--enable-fpm \
--with-fpm-user=nginx \
--with-fpm-group=nginx \
--with-gd \
--with-iconv \
--with-zlib \
--enable-xml \
--enable-shmop \
--enable-sysvsem \
--enable-inline-optimization \
--enable-mbregex \
--enable-mbstring \
--enable-ftp \
--enable-gd-native-ttf \
--with-openssl \
--enable-pcntl \
--enable-sockets \
--with-xmlrpc \
--enable-zip \
--enable-soap \
--without-pear \
--with-gettext \
--enable-session \
--with-curl \
--with-jpeg-dir \
--with-freetype-dir \
--enable-opcache
# 执行完成后的结果：
Generating files
configure: creating ./config.status
creating main/internal_functions.c
creating main/internal_functions_cli.c
+--------------------------------------------------------------------+
| License: |
| This software is subject to the PHP License, available in this |
| distribution in the file LICENSE. By continuing this installation |
| process, you are bound by the terms of this license agreement. |
| If you do not agree with the terms of this license, you must abort |
| the installation process at this point. |
+--------------------------------------------------------------------+
Thank you for using PHP.
config.status: creating php7.spec
config.status: creating main/build-defs.h
config.status: creating scripts/phpize
config.status: creating scripts/man1/phpize.1
config.status: creating scripts/php-config
config.status: creating scripts/man1/php-config.1
config.status: creating sapi/cli/php.1
config.status: creating sapi/fpm/php-fpm.conf
config.status: creating sapi/fpm/www.conf
config.status: creating sapi/fpm/init.d.php-fpm
config.status: creating sapi/fpm/php-fpm.service
config.status: creating sapi/fpm/php-fpm.8
config.status: creating sapi/fpm/status.html
config.status: creating sapi/cgi/php-cgi.1
config.status: creating ext/phar/phar.1
config.status: creating ext/phar/phar.phar.1
config.status: creating main/php_config.h
config.status: executing default commands
注：这里很多人第一次安装的时候可能会提示
configure: error: mcrypt.h not found. Please reinstall libmcrypt
意思是，没有查找到mcrytp.h,需要安装libcrytp
解决：
[root@VM-0-11-centos src]# wget ftp://mcrypt.hellug.gr/pub/crypto/mcrypt/attic/libmcrypt/libmcrypt-2.5.7.tar.gz
[root@VM-0-11-centos src]# tar -zxvf libmcrypt-2.5.7.tar.gz
[root@VM-0-11-centos src]# cd libmcrypt-2.5.7
[root@VM-0-11-centos libmcrypt-2.5.7]# ./configure
[root@VM-0-11-centos libmcrypt-2.5.7]# make && make install
然后重新执行编译
编译 + 安装，编译源码, 如下所示
[root@VM-0-11-centos php-7.1.3]# make
Generating phar.php
Generating phar.phar
PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled.
directorytreeiterator.inc
pharcommand.inc
directorygraphiterator.inc
invertedregexiterator.inc
clicommand.inc
phar.inc
Build complete.
Don't forget to run 'make test'.
## 对编译结果进行测试：
[root@VM-0-11-centos php-7.1.3]# make test
...
...
## 安装程序至指定目录：
[root@VM-0-11-centos php-7.1.3]# make install
Installing shared extensions: /usr/local/php7/lib/php/extensions/no-debug-non-zts-20160303/
Installing PHP CLI binary: /usr/local/php7/bin/
Installing PHP CLI man page: /usr/local/php7/php/man/man1/
Installing PHP FPM binary: /usr/local/php7/sbin/
Installing PHP FPM defconfig: /usr/local/php7/etc/
Installing PHP FPM man page: /usr/local/php7/php/man/man8/
Installing PHP FPM status page: /usr/local/php7/php/php/fpm/
Installing phpdbg binary: /usr/local/php7/bin/
Installing phpdbg man page: /usr/local/php7/php/man/man1/
Installing PHP CGI binary: /usr/local/php7/bin/
Installing PHP CGI man page: /usr/local/php7/php/man/man1/
Installing build environment: /usr/local/php7/lib/php/build/
Installing header files: /usr/local/php7/include/php/
Installing helper programs: /usr/local/php7/bin/
program: phpize
program: php-config
Installing man pages: /usr/local/php7/php/man/man1/
page: phpize.1
page: php-config.1
/usr/local/src/php-7.1.3/build/shtool install -c ext/phar/phar.phar /usr/local/php7/bin
ln -s -f phar.phar /usr/local/php7/bin/phar
Installing PDO headers: /usr/local/php7/include/php/ext/pdo/
[root@VM-0-11-centos php-7.1.3]#
查看安装成功后的版本信息
[root@VM-0-11-centos ~]# /usr/local/php7/bin/php -v
PHP 7.1.3 (cli) (built: Aug 17 2020 13:48:11) ( NTS )
Copyright (c) 1997-2017 The PHP Group
Zend Engine v3.1.0, Copyright (c) 1998-2017 Zend Technologies
[root@VM-0-11-centos ~]#
2.4. 修改配置
修改php配置，查看php加载配置文件路径：
[root@VM-0-11-centos ~]# /usr/local/php7/bin/php -i | grep php.ini
Configuration File (php.ini) Path => /usr/local/php7/etc
[root@VM-0-11-centos ~]#
php-7.1.3源码目录下:
[root@VM-0-11-centos ~]# ll /usr/local/src/php-7.1.3/ | grep ini
-rw-rw-r-- 1 nginx nginx 71063 3月 14 2017 php.ini-development
-rw-rw-r-- 1 nginx nginx 71095 3月 14 2017 php.ini-production
[root@VM-0-11-centos ~]#
复制PHP的配置文件，使用以下命令:
[root@VM-0-11-centos ~]# cp /usr/local/src/php-7.1.3/php.ini-production /usr/local/php7/etc/php.ini
## 根据需要对`php.ini`配置进行配置修改，请自行参考官方文档配置 。
[root@VM-0-11-centos ~]# /usr/local/php7/bin/php -i | grep php.ini
Configuration File (php.ini) Path => /usr/local/php7/etc
Loaded Configuration File => /usr/local/php7/etc/php.ini
[root@VM-0-11-centos ~]#
2.5 启用php-fpm服务
上面我们在编译 php7 的时候，已经将fpm模块编译了，那么接下来，我们要启用 php-fpm。但是默认情况下它的配置文件和服务都没有启用，所以要我们自己来配置，先重命名并移动以下两个文件
[root@VM-0-11-centos ~]# cd /usr/local/php7/etc
[root@VM-0-11-centos etc]# cp php-fpm.conf.default php-fpm.conf
[root@VM-0-11-centos etc]# cp php-fpm.d/www.conf.default php-fpm.d/www.conf
php-fpm 的具体配置这里不做深入去详解，因为在编译之前 ./configure 的时候，我们都已经确定了一些配置，比如运行fpm的用户和用户组之类的，所以默认配置应该不会存在路径问题和权限问题。
配置php-fpm的服务载入：
就像上面的nginx一样，我们希望使用 service php-fpm start|stop|restart 这些操作来实现服务的重启，但没有像nginx那么复杂，php编译好之后，给我们提供了一个 php-fpm 的程序。这个文件放在php编译源码目录中：
[root@VM-0-11-centos ~]# cd /usr/local/src/php-7.1.3/sapi/fpm/
## 或直接使用可执行文件： /usr/local/php7/sbin/php-fpm
[root@VM-0-11-centos fpm]# ls
[root@VM-0-11-centos fpm]# cp init.d.php-fpm /etc/init.d/php-fpm
[root@VM-0-11-centos fpm]# chmod +x /etc/init.d/php-fpm
[root@VM-0-11-centos fpm]# chkconfig --add php-fpm
[root@VM-0-11-centos fpm]# chkconfig php-fpm on
通过上面这个操作，我们就可以使用 service php-fpm start 来启用 php-fpm 了。用 ps -ef | grep php-fpm 看看进程吧。
[root@VM-0-11-centos fpm]# ps -ef | grep php-fpm
root 108421 1 0 23:19 ? 00:00:00 php-fpm: master process (/usr/local/php7/etc/php-fpm.conf)
nginx 108422 108421 0 23:19 ? 00:00:00 php-fpm: pool www
nginx 108423 108421 0 23:19 ? 00:00:00 php-fpm: pool www
root 108507 2285 0 23:23 pts/0 00:00:00 grep --color=auto php-fpm
[root@VM-0-11-centos fpm]#
这样，PHP环境就安装完成了，接下来我们通过Nginx代理集成PHP7，来实现Nginx+PHP服务。
3. Nginx代理集成PHP7配置
通过上面的操作，nginx 和 php-fpm 服务都已经正常运行起来了，但是 php-fpm 只是在 127.0.0.1:9000 上提供服务，外网是无法访问的，而且也不可能直接通过 php-fpm 给外网提供服务，因此需要使用nginx去代理 9000 端口执行 php。实际上这个过程只需要对 nginx 进行配置即可，php-fpm 已经在后台运行了，我们需要在 nginx 的配置文件中增加代理的规则，即可让用户在访问 80 端口，请求php的时候，交由后端的 php-fpm 去执行，并返回结果。现在编辑Nginx的配置文件
[root@VM-0-11-centos ~]# vi /usr/local/nginx/conf/nginx.conf
如果你大致了解过 nginx 的配置，应该能够很快分辨出这个配置文件里面的结构，并且知道 server 块代表一个虚拟主机，要增加虚拟主机就再增加一个server块，而且这个 conf 文件中也给出了例子。那么怎么代理 php-fpm 呢？找到:
#location ~ \.php$ {
# root html;
# fastcgi_pass 127.0.0.1:9000;
# fastcgi_index index.php;
# fastcgi_param SCRIPT_FILENAME /script$fastcgi_script_name;
# include fastcgi_params;
#}
把前面的 # 注释符号去掉，把 script 改为 $document_root 最终如下：
location ~ \.php$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /usr/local/nginx/html/$fastcgi_script_name;
include fastcgi_params;
}
这样就可以了，重新载入nginx配置即可，使用以下命令
/usr/local/nginx/sbin/nginx -s reload
然后到 /usr/local/nginx/html 去写一个 php 文件：index.php 进行测试，文件：index.php的代码如下:
<?php
phpinfo();
?>
现在访问目录IP，应该能看到结果如下:
phpinfo.png
附完整的Nginx配置( /usr/local/nginx/conf/nginx.conf )文件内容：
#user nobody;
worker_processes 1;
#error_log logs/error.log;
#error_log logs/error.log notice;
#error_log logs/error.log info;
#pid logs/nginx.pid;
events {
worker_connections 1024;
}
http {
include mime.types;
default_type application/octet-stream;
#log_format main '$remote_addr - $remote_user [$time_local] "$request" '
# '$status $body_bytes_sent "$http_referer" '
# '"$http_user_agent" "$http_x_forwarded_for"';
#access_log logs/access.log main;
sendfile on;
#tcp_nopush on;
#keepalive_timeout 0;
keepalive_timeout 65;
#gzip on;
server {
listen 80;
server_name localhost;
#charset koi8-r;
#access_log logs/host.access.log main;
location / {
root html;
index index.php index.html index.htm;
}
#error_page 404 /404.html;
# redirect server error pages to the static page /50x.html
#
error_page 500 502 503 504 /50x.html;
location = /50x.html {
root html;
}
# proxy the PHP scripts to Apache listening on 127.0.0.1:80
#
#location ~ \.php$ {
# proxy_pass http://127.0.0.1;
#}
# pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000
#
location ~ .*\.php(\/.*)*$ {
root html;
fastcgi_pass 127.0.0.1:9000;
fastcgi_index index.php;
fastcgi_param SCRIPT_FILENAME /usr/local/nginx/html/$fastcgi_script_name;
include fastcgi_params;
}
# deny access to .htaccess files, if Apache's document root
# concurs with nginx's one
#
#location ~ /\.ht {
# deny all;
#}
proxy_connect_timeout 600;
proxy_read_timeout 600;
proxy_send_timeout 600;
}
# another virtual host using mix of IP-, name-, and port-based configuration
#
#server {
# listen 8000;
# listen somename:8080;
# server_name somename alias another.alias;
# location / {
# root html;
# index index.html index.htm;
# }
#}
# HTTPS server
#
#server {
# listen 443 ssl;
# server_name localhost;
# ssl_certificate cert.pem;
# ssl_certificate_key cert.key;
# ssl_session_cache shared:SSL:1m;
# ssl_session_timeout 5m;
# ssl_ciphers HIGH:!aNULL:!MD5;
# ssl_prefer_server_ciphers on;
# location / {
# root html;
# index index.html index.htm;
# }
#}
}
3.MySQL5.7安装配置
3.1下载安装包
wget http://repo.mysql.com//mysql57-community-release-el7-7.noarch.rpm
# 或者
wget http://cdn.mysql.com//Downloads/MySQL-5.7/mysql-community-server-5.7.18-1.el7.x86_64.rpm
如果新的系统还没有wget命令的话可以先：yum install wget，一般都会有安装了wget命令工具。
添加选择yum源：
[root@VM-0-11-centos src]# yum localinstall mysql57-community-release-el7-7.noarch.rpm
[root@VM-0-11-centos src]# yum repolist all | grep mysql
mysql-connectors-community/x86_64 MySQL Connectors Community enabled: 30
mysql-connectors-community-source MySQL Connectors Community - So disabled
mysql-tools-community/x86_64 MySQL Tools Community enabled: 47
mysql-tools-community-source MySQL Tools Community - Source disabled
mysql55-community/x86_64 MySQL 5.5 Community Server disabled
mysql55-community-source MySQL 5.5 Community Server - So disabled
mysql56-community/x86_64 MySQL 5.6 Community Server disabled
mysql56-community-source MySQL 5.6 Community Server - So disabled
mysql57-community/x86_64 MySQL 5.7 Community Server enabled: 187
mysql57-community-source MySQL 5.7 Community Server - So disabled
3.2安装MySQL：
[root@VM-0-11-centos src]# yum install mysql-community-server
.....
Installing : mysql-community-server-5.7.18-1.el7.x86_64 4/6
Installing : mysql-community-libs-compat-5.7.18-1.el7.x86_64 5/6
Erasing : 1:mariadb-libs-5.5.52-1.el7.x86_64 6/6
Verifying : mysql-community-server-5.7.18-1.el7.x86_64 1/6
Verifying : mysql-community-common-5.7.18-1.el7.x86_64 2/6
Verifying : mysql-community-client-5.7.18-1.el7.x86_64 3/6
Verifying : mysql-community-libs-compat-5.7.18-1.el7.x86_64 4/6
Verifying : mysql-community-libs-5.7.18-1.el7.x86_64 5/6
Verifying : 1:mariadb-libs-5.5.52-1.el7.x86_64 6/6
Installed:
mysql-community-libs.x86_64 0:5.7.18-1.el7
mysql-community-libs-compat.x86_64 0:5.7.18-1.el7
mysql-community-server.x86_64 0:5.7.18-1.el7
Dependency Installed:
mysql-community-client.x86_64 0:5.7.18-1.el7
mysql-community-common.x86_64 0:5.7.18-1.el7
Replaced:
mariadb-libs.x86_64 1:5.5.52-1.el7
Complete!
[root@VM-0-11-centos src]#
安装完成之后会自动在log中生成连接的密码
3.3启动Mysql：
启动Mysql
systemctl start mysqld
查看状态
systemctl status mysqld
[root@localhost src]# systemctl start mysqld
[root@localhost src]# systemctl status mysqld
● mysqld.service - MySQL Server
Loaded: loaded (/usr/lib/systemd/system/mysqld.service; enabled; vendor preset: disabled)
Active: active (running) since 二 2020-08-18 20:33:25 CST; 1 day 21h ago
Docs: man:mysqld(8)
http://dev.mysql.com/doc/refman/en/using-systemd.html
Main PID: 17343 (mysqld)
CGroup: /system.slice/mysqld.service
└─17343 /usr/sbin/mysqld --daemonize --pid-file=/var/run/mysqld/my...
8月 18 20:33:24 VM-0-11-centos systemd[1]: Stopped MySQL Server.
8月 18 20:33:24 VM-0-11-centos systemd[1]: Starting MySQL Server...
8月 18 20:33:25 VM-0-11-centos systemd[1]: Started MySQL Server.
[root@localhost src]#
要知道在centos7中，没有了service命令，都是使用systemctl命令。
启动的时候是start mysqld而不是mysql
3.4 登录数据库，修改数据库密码
mysql5.7的新特性之一就是在初始化的时候会生成一个自定义的密码，然后你需要找到这个密码，登录的时候输入。注意，输入密码的时候是不显示
[root@VM-0-11-centos src]# grep password /var/log/mysqld.log
2020-08-18T09:15:17.046285Z 1 [Note] A temporary password is generated for root@localhost: afWrxaqQi0!M
[root@VM-0-11-centos src]#
如上面所示，root用户的密码为：afWrxaqQi0!M。现在我们使用上面的密码连接到MySQL数据。
3.4.1登录数据库：
这里-p之后不用输入密码，回车后再输入。改过密码之后登录则是直接在-p后加密码了。
[root@VM-0-11-centos src]# mysql -uroot -p
Enter password:
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 1462
Server version: 5.7.31 MySQL Community Server (GPL)
Copyright (c) 2000, 2020, Oracle and/or its affiliates. All rights reserved.
Oracle is a registered trademark of Oracle Corporation and/or its
affiliates. Other names may be trademarks of their respective
owners.
Type 'help;' or '\h' for help. Type '\c' to clear the current input statement.
mysql>
3.4.2 修改密码:
注意，修改的密码太简单会不给修改，把大小写字母和数字加上就肯定可以了。然后切记切记，mysql里面的命令要加分号！分号！分号！
mysql> SET PASSWORD = PASSWORD('Admin123456');
3.5 设置远程可以登录:
现在这样是无法在本地用工具登录访问的，现在要做两件事，一件事是将云服务器上的3306端口开放；另一件事是配置远程可以访问。
mysql> GRANT ALL PRIVILEGES ON *.* TO 'root'@'%' IDENTIFIED BY 'Admin123456' WITH GRANT OPTION;
mysql> flush privileges;
3.6 修改一些简单的配置
3.6.1 设置编码
vim /etc/my.cnf
[mysql]
default-character-set=utf8mb4
[client]
default-character-set=utf8mb4
[mysqld]
character-set-server=utf8mb4
3.6.2 设置时区为东八区
default-time_zone = '+8:00'
附上my.conf配置
# For advice on how to change settings please see
# http://dev.mysql.com/doc/refman/5.7/en/server-configuration-defaults.html
[mysql]
default-character-set=utf8mb4
[client]
default-character-set=utf8mb4
[mysqld]
character-set-server=utf8mb4
#
# Remove leading # and set to the amount of RAM for the most important data
# cache in MySQL. Start at 70% of total RAM for dedicated server, else 10%.
# innodb_buffer_pool_size = 128M
#
# Remove leading # to turn on a very important data integrity option: logging
# changes to the binary log between backups.
# log_bin
#
# Remove leading # to set options mainly useful for reporting servers.
# The server defaults are faster for transactions and fast SELECTs.
# Adjust sizes as needed, experiment to find the optimal values.
# join_buffer_size = 128M
# sort_buffer_size = 2M
# read_rnd_buffer_size = 2M
sql_mode=STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
default-time_zone = '+8:00'
datadir=/var/lib/mysql
socket=/var/lib/mysql/mysql.sock
# Disabling symbolic-links is recommended to prevent assorted security risks
symbolic-links=0
log-error=/var/log/mysqld.log
pid-file=/var/run/mysqld/mysqld.pid
3.6.3设置sql支持group by语句
mysql> sql_mode=STRICT_TRANS_TABLES,NO_ZERO_IN_DATE,NO_ZERO_DATE,ERROR_FOR_DIVISION_BY_ZERO,NO_AUTO_CREATE_USER,NO_ENGINE_SUBSTITUTION
3.6.4 设置开机启动
systemctl enable mysqld
systemctl daemon-reload
最后重启数据库，使配置生效:
systemctl restart mysqld
到此，PHP+Nginx+MySQL安装完成。如有问题，请及时提出。
参考文献：
https://www.yiibai.com/nginx/nginx-php7-source-config.html
https://www.jianshu.com/p/531cc35b15e7
