1. 操作系统准备

本次实验环境准备的是两台Centos 7作为实验环境，Master节点要求必须至少2C，其余node节点1C即可。

Tips：人生建议：没事还是不要用Redhat做作为自己的测试环境，YUM真的让人心累。

2. 部署架构

3. 设置主机名及相关环境准备

(1) 在两台主机上执行以下操作

• 编辑/etc/hostname文件,将其中主机名修改为master和node1，并编辑/etc/hosts文件，修改内容为：

192.168.199.21  node1
192.168.199.20  master
192.168.199.20  etcd
192.168.199.20  registry

• 关闭防火墙

[root@master yum.repos.d]# systemctl stop firewalld
[root@master yum.repos.d]# systemctl disable firewalld

• 关闭swap
  swap，这个当内存不足时，linux会自动使用swap，将部分内存数据存放到磁盘中，这个这样会使性能下降，为了性能考虑推荐关掉

[root@master yum.repos.d]# swapoff -a

• 关闭selinux
  vi /etc/selinux/config ，关闭SELINUX

# This file controls the state of SELinux on the system.
# SELINUX= can take one of these three values:
#     enforcing - SELinux security policy is enforced.
#     permissive - SELinux prints warnings instead of enforcing.
#     disabled - No SELinux policy is loaded.
SELINUX=disabled
# SELINUXTYPE= can take one of three two values:
#     targeted - Targeted processes are protected,
#     minimum - Modification of targeted policy. Only selected processes are protected.
#     mls - Multi Level Security protection.
SELINUXTYPE=targeted

• 配置yum源，此处配置的是阿里的Centos 7的yum源和阿里的kubernetes源
  Tips：可以在配置之前将/etc/yum.repos.d/ 下的文件都备份到bak目录下

[root@master ~]# cd /etc/yum.repos.d/  &&  curl -O http://mirrors.aliyun.com/repo/Centos-7.repo
[root@master yum.repos.d]# vi kubernetes.repo

[kubernetes]
name=Kubernetes
baseurl=https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64/
enabled=1
gpgcheck=1
repo_gpgcheck=0
gpgkey=https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg" 

[root@master yum.repos.d]yum clean all

[root@master yum.repos.d]#yum makecache

• reboot重启操作系统，使hostname、SELINUX配置生效

4. 部署etcd

Kubernetes、Flannel都依赖于etcd服务，所以需要先安装etcd。直接使用yum进行安装

[root@master yum.repos.d]# yum -y install etcd
[root@master yum.repos.d]# etcdctl --version
etcdctl version: 3.3.11
API version: 2
[root@master yum.repos.d]# 

yum安装的etcd默认配置文件在/etc/etcd/etcd.conf。编辑配置文件，修改以下配置项参数：

#[Member]
ETCD_DATA_DIR="/var/lib/etcd/default.etcd"
ETCD_LISTEN_CLIENT_URLS="http://0.0.0.0:2379,http://0.0.0.0:4001"

#[Clustering]
ETCD_ADVERTISE_CLIENT_URLS="http://etcd:2379,http://etcd:4001"

选项说明：
--listen-peer-urls ：etcd作为分布式节点通信端口，默认指定端口7001，我们这里做的是单节点，这个参数可以不写，需要知道的是v2版本中改变为2380，7001仍可用
--listen-client-urls ：客户端操作etcd API的端口，默认指定端口4001，v2中改变为2379，在k8s中我们要使用4001端口
--data-dir ：指定数据存放目录
--advertise-client-urls ：作为分布式的客户端连接端口，如果不写这个参数会出现以下报错。

报错截图

启动并验证状态

[root@master  ~]# systemctl start etcd
[root@master ~]#  etcdctl set testdir/testkey0 0
0
[root@master  ~]#  etcdctl get testdir/testkey0 
0
[root@master ~]# etcdctl -C http://etcd:4001 cluster-health
member 8e9e05c52164694d is healthy: got healthy result from http://0.0.0.0:2379
cluster is healthy
[root@master ~]# etcdctl -C http://etcd:2379 cluster-health
member 8e9e05c52164694d is healthy: got healthy result from http://0.0.0.0:2379
cluster is healthy

5. 部署Master

5.1 部署Docker

采取yum的安装方式,安装完成之后修改/etc/sysconfig/docker使其可以在registry上拉取镜像

[root@master ~]# yum install docker

[root@master ~]# vim /etc/sysconfig/docker

# /etc/sysconfig/docker

# Modify these options if you want to change the way the docker daemon runs
OPTIONS='--selinux-enabled --log-driver=journald --signature-verification=false'
if [ -z "${DOCKER_CERT_PATH}" ]; then
    DOCKER_CERT_PATH=/etc/docker
fi
OPTIONS='--insecure-registry registry:5000'
[root@master ~]#

设置开机自启动并开启服务

[root@master yum.repos.d]# systemctl start docker
[root@master yum.repos.d]# systemctl enable docker

5.2 安装kubernetes

采取yum的安装方式

[root@master ~]# yum install kubernetes

5.3 配置并启动kubernetes

在Master上需要运行角色Kubernets API Server、Kubernets Controller Manager、Kubernets Scheduler，所以需要修改相对应的服务配置

5.3.1 vi /etc/kubernetes/apiserver

[root@master ~]# vim /etc/kubernetes/apiserver
# The address on the local server to listen to.
KUBE_API_ADDRESS="--insecure-bind-address=0.0.0.0"

# The port on the local server to listen on.
 KUBE_API_PORT="--port=8080"

# Comma separated list of nodes in the etcd cluster
KUBE_ETCD_SERVERS="--etcd-servers=http://etcd:2379"

# Address range to use for services
KUBE_SERVICE_ADDRESSES="--service-cluster-ip-range=10.254.0.0/16"

# default admission control policies
KUBE_ADMISSION_CONTROL="--admission-control=NamespaceLifecycle,NamespaceExists,LimitRanger,SecurityContextDeny,ServiceAccount,ResourceQuota"

# Add your own!
KUBE_API_ARGS=""

5.3.1 vi /etc/kubernetes/config

[root@k8s-master ~]# vim /etc/kubernetes/config

###
# kubernetes system config
#
# The following values are used to configure various aspects of all
# kubernetes services, including
#
#   kube-apiserver.service
#   kube-controller-manager.service
#   kube-scheduler.service
#   kubelet.service
#   kube-proxy.service
# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://master:8080"

启动服务并设置开机自启动

[root@master kubernetes]# vim start_services.sh 
#!/bin/bash
for SERVICES in etcd kube-apiserver kube-controller-manager kube-scheduler; do
    systemctl restart $SERVICES
    systemctl enable $SERVICES
    systemctl status $SERVICES
done
[root@master kubernetes]# bash start_services.sh

6. 部署Node1

6.1 部署docker

参考见5.1

6.2 部署kurbernetes

参考见5.2

6.3 配置并启动kubernetes

在Node1上需要运行角色Kubelet、Kubernets Proxy，所以需要修改相对应的服务配置

6.3.1 vim /etc/kubernetes/config

# logging to stderr means we get it in the systemd journal
KUBE_LOGTOSTDERR="--logtostderr=true"

# journal message level, 0 is debug
KUBE_LOG_LEVEL="--v=0"

# Should this cluster be allowed to run privileged docker containers
KUBE_ALLOW_PRIV="--allow-privileged=false"

# How the controller-manager, scheduler, and proxy find the apiserver
KUBE_MASTER="--master=http://master:8080"

6.3.2 vim /etc/kubernetes/kubelet

# kubernetes kubelet (minion) config
# The address for the info server to serve on (set to 0.0.0.0 or "" for all interfaces)
KUBELET_ADDRESS="--address=0.0.0.0"

# The port for the info server to serve on
# KUBELET_PORT="--port=10250"

# You may leave this blank to use the actual hostname
KUBELET_HOSTNAME="--hostname-override=node1"

# location of the api-server
KUBELET_API_SERVER="--api-servers=http://master:8080"

# pod infrastructure container
KUBELET_POD_INFRA_CONTAINER="--pod-infra-container-image=registry.access.redhat.com/rhel7/pod-infrastructure:latest"

# Add your own!
KUBELET_ARGS=""

启动服务并设置开机自启动

[root@node1 kubernetes]# vim start_services.sh 

#!/bin/bash
for SERVICES in kube-proxy kubelet docker; do
    systemctl restart $SERVICES
    systemctl enable $SERVICES
    systemctl status $SERVICES
done

[root@node1 kubernetes]# bash start_services.sh

7. 创建覆盖网络——Flannel

7.1 安装Flannel

在master、node上均执行如下命令，进行安装

root@master ~]# yum install flannel

7.2 配置Flannel

master、node上均编辑/etc/sysconfig/flanneld，修改相关配置

[root@master ~]# vi /etc/sysconfig/flanneld

# Flanneld configuration options

# etcd url location.  Point this to the server where etcd runs
FLANNEL_ETCD_ENDPOINTS="http://etcd:2379"

# etcd config key.  This is the configuration key that flannel queries
# For address range assignment
FLANNEL_ETCD_PREFIX="/atomic.io/network"

# Any additional options that you want to pass
#FLANNEL_OPTIONS=""

7.3 配置etcd中关于flannel的key

Flannel使用Etcd进行配置，来保证多个Flannel实例之间的配置一致性，所以需要在etcd上进行如下配置：（‘/atomic.io/network/config’这个key与上文/etc/sysconfig/flannel中的配置项FLANNEL_ETCD_PREFIX是相对应的，错误的话启动就会出错）

[root@master ~]# etcdctl mk /atomic.io/network/config '{ "Network": "10.0.0.0/16" }'
{ "Network": "10.0.0.0/16" }

7.4 启动

启动Flannel之后，需要依次重启docker、kubernete。

• 在master执行：

systemctl enable flanneld.service 
systemctl start flanneld.service 
systemctl restart docker
systemctl restart kube-apiserver.service
systemctl restart kube-controller-manager.service
systemctl restart kube-scheduler.service

• 在node上执行：

systemctl enable flanneld.service 
systemctl start flanneld.service 
systemctl restart docker
systemctl restart kubelet.service
systemctl restart kube-proxy.service

Tips:期间遇到的一些问题

Q1. 在刚开始用redhat部署的时候，使用yum一直会遇到注册的提示，并且即使删除了yum.repo下的repo文件，再次使用yum也会重新生成官方repo文件

报错示例

经过查找，发现是redhat自带的插件subscription-manager给弄得的。而这个插件的作用就是Red Hat Subscription Manager订阅管理器，就是它让你一直register。可以找到/etc/yum/pluginconf.d/subscription-manager.conf的配置文件将其禁用。

Q2. 在运行etcd的时候，无法启动。运行journalctl -xe查看日志，提示报错“When listening on specific address(es)”

经过排查是因为未正确的配置/etc/etcd/etcd.conf中的ETCD_ADVERTISE_CLIENT_URLS参数配置导致。具体参考 4.部署etcd