1.前言
前文ROS机器人底盘(33)-ROS程序开机自启动（1）使用了ROS的 robot_upstart包设置了pibot_bringup开启启动的方法，在统一用到其他的launch上会发现无法启动的问题，比如在启动gmapping时候,没有相关环境变量等，本文介绍使用systemd设置启动项
2.使用systemctrl创建服务
2.1新建服务
在/etc/systemd/system创建pibot.service
# pibot.serive
[Unit]
Description=this is pibot service
[Service]
Type=simple
ExecStart=/usr/bin/pibot_start
ExecStop=/usr/bin/pibot_stop
ExecRestart=/usr/bin/pibot_restart
[Install]
WantedBy=multi-user.target
2.2 添加执行脚本
看到我们对应的项目添加脚本即可，这里的脚本启动,这里需要设置ROS的相关环境和PIBOT的相关环境及变量
我们手动输入命令启动时候的环境变量是写在
~/.basrhc,该文件会在打开bash shell的时候被加载
#pibot_start
#!/bin/bash
log_file=/tmp/pibot-upstart.log
echo "$DATE: pibot-start" >> $log_file
pibotrc=/etc/pibotrc
. $pibotrc
code_name=$(lsb_release -sc)
if [ "$code_name" = "trusty" ]; then
ros_version="indigo"
elif [ "$code_name" = "xenial" ]; then
ros_version="kinetic"
elif [ "$code_name" = "bionic" ]; then
ros_version="melodic"
else
echo "PIBOT not support $code_name" >> $log_file
exit
fi
echo "SYS_DIST: $code_name" >> $log_file
echo "ROS_DIST: $ros_version" >> $log_file
echo "LOCAL_IP: $LOCAL_IP" >> $log_file
echo "ROS_MASTER_URI: $ROS_MASTER_URI" >> $log_file
echo "ROS_IP: $ROS_IP" >> $log_file
echo "HOSTNAME: $ROS_HOSTNAME" >> $log_file
echo "PIBOT_MODEL: $PIBOT_MODEL" >> $log_file
echo "PIBOT_LIDAR: $PIBOT_LIDAR" >> $log_file
echo "PIBOT_BOARD: $PIBOT_BOARD" >> $log_file
# 这里写需要添加的启动launch命令
roslaunch pibot_navigation gmapping.launch
以hera为例
#pibotenv
#source ros
source /opt/ros/kinetic/setup.bash
LOCAL_IP=192.168.12.1 #这里IP需要设置本机IP，连接外网需要在路由器设置好固定`IP`
export ROS_IP=$LOCAL_IP
export ROS_HOSTNAME=$LOCAL_IP
export PIBOT_MODEL=hera
export PIBOT_LIDAR=rplidar
export PIBOT_BOARD=stm32f4
export ROS_MASTER_URI=http://$LOCAL_IP:11311
#source pibot
source /home/pibot/pibot_ros/ros_ws/devel/setup.bash
2.3 测试
- 启动
sudo systemctl start pibot - 停止
sudo systemctl stop pibot - 重启
sudo systemctl restart pibot - 开启开机启动
sudo systemctl enable pibot - 关闭开机启动
sudo systemctl disable pibot - 查看是否开机启动
systemctl is-enabled pibot - 刷新配置
sudo systemctl daemon-reload - 查看状态
sudo systemctl status pibot
3.验证
重启后，查看状态，没有错误显示则为正常
4.其他
4.1 一键配置
pibot提供一间配置脚本pibot_add_upstart.sh
#修改 ~/pibot_ros/pibot_upstart/pibotenv修改参数
cd ~/pibot_ros
./pibot_add_upstart.sh
