IMX6Q-Yocto-天嵌开发板设备树

主要修改了
触摸驱动ft5x06
声卡驱动sgtl5000

/*
 * Copyright 2012-2016 Freescale Semiconductor, Inc.
 * Copyright 2011 Linaro Ltd.
 *
 * The code contained herein is licensed under the GNU General Public
 * License. You may obtain a copy of the GNU General Public License
 * Version 2 or later at the following locations:
 *
 * http://www.opensource.org/licenses/gpl-license.html
 * http://www.gnu.org/copyleft/gpl.html
 */
 
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
 
/ {
    aliases {
        mxcfb0 = &mxcfb1;
/*
        mxcfb1 = &mxcfb2;
        mxcfb2 = &mxcfb3;
        mxcfb3 = &mxcfb4;
*/
    };
 
    battery: max8903@0 {
        compatible = "fsl,max8903-charger";
        pinctrl-names = "default";
        dok_input = <&gpio2 24 1>;
        uok_input = <&gpio1 27 1>;
        chg_input = <&gpio3 23 1>;
        flt_input = <&gpio5 2 1>;
        fsl,dcm_always_high;
        fsl,dc_valid;
        fsl,usb_valid;
        status = "okay";
    };
 
    hannstar_cabc {
        compatible = "hannstar,cabc";
        lvds0 {
            gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
        };
        lvds1 {
            gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>;
        };
    };
 
    chosen {
        stdout-path = &uart1;
    };
 
    leds {
        compatible = "gpio-leds";
 
        charger-led {
            gpios = <&gpio1 2 0>;
            linux,default-trigger = "max8903-charger-charging";
            retain-state-suspended;
        };
    };
 
    memory: memory {
        reg = <0x10000000 0x40000000>;
    };
 
    regulators {
        compatible = "simple-bus";
        #address-cells = <1>;
        #size-cells = <0>;
 
        reg_usb_otg_vbus: regulator@0 {
            compatible = "regulator-fixed";
            reg = <0>;
            regulator-name = "usb_otg_vbus";
            regulator-min-microvolt = <5000000>;
            regulator-max-microvolt = <5000000>;
            gpio = <&gpio3 22 0>;
            enable-active-high;
            vin-supply = <&swbst_reg>;
        };
 
        reg_usb_h1_vbus: regulator@1 {
            compatible = "regulator-fixed";
            reg = <1>;
            regulator-name = "usb_h1_vbus";
            regulator-min-microvolt = <5000000>;
            regulator-max-microvolt = <5000000>;
            gpio = <&gpio1 29 0>;
            enable-active-high;
            vin-supply = <&swbst_reg>;
        };
 
        reg_audio: regulator@2 {
            compatible = "regulator-fixed";
            reg = <2>;
            regulator-name = "wm8962-supply";
            gpio = <&gpio4 10 0>;
            enable-active-high;
        };
 
        reg_pcie: regulator@3 {
            compatible = "regulator-fixed";
            reg = <3>;
            pinctrl-names = "default";
            pinctrl-0 = <&pinctrl_pcie_reg>;
            regulator-name = "MPCIE_3V3";
            regulator-min-microvolt = <3300000>;
            regulator-max-microvolt = <3300000>;
            gpio = <&gpio3 19 0>;
            regulator-always-on;
            enable-active-high;
        };
 
        reg_sensor: regulator@4 {

            regulator-name = "sensor-supply";
            regulator-min-microvolt = <3300000>;
            regulator-max-microvolt = <3300000>;
            gpio = <&gpio2 31 0>;
            startup-delay-us = <500>;
            enable-active-high;
        };
 
        reg_hdmi: regulator@5 {
            compatible = "regulator-fixed";
            reg = <5>;
            regulator-name = "hdmi-5v-supply";
            regulator-min-microvolt = <5000000>;
            regulator-max-microvolt = <5000000>;
            enable-active-high;
            hdmi-5v-supply = <&swbst_reg>;
        };
 
        reg_mipi_dsi_pwr_on: mipi_dsi_pwr_on {
            compatible = "regulator-fixed";
            regulator-name = "mipi_dsi_pwr_on";
            gpio = <&gpio6 14 0>;
            enable-active-high;
        };
        reg_3p3v: 3p3v {            
            compatible = "regulator-fixed";         
            regulator-name = "3P3V";            
            regulator-min-microvolt = <3300000>;            
            regulator-max-microvolt = <3300000>;            
            regulator-always-on;
        };
        reg_1p2v: 1p2v{
            compatible = "regulator-fixed";
            regulator-name = "1P2V";
            regulator-min-microvolt = <1200000>;
                        regulator-max-microvolt = <1200000>;
            regulator-always-on;
        };
        reg_2p5v: 2p5v{
                        compatible = "regulator-fixed";
                        regulator-name = "2P5V";
                        regulator-min-microvolt = <2500000>;
                        regulator-max-microvolt = <2500000>;
                        regulator-always-on;
                };
    };
 
    gpio-keys {
        compatible = "gpio-keys";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_gpio_keys>;
 
        power {
            label = "Power Button";
            gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
            gpio-key,wakeup;
            linux,code = <KEY_POWER>;
        };
 
        volume-up {
            label = "Volume Up";
            gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
            gpio-key,wakeup;
            linux,code = <KEY_VOLUMEUP>;
        };
 
        volume-down {
            label = "Volume Down";
            gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
            gpio-key,wakeup;
            linux,code = <KEY_VOLUMEDOWN>;
        };
    };
 
    sound {
    /*  compatible = "fsl,imx6q-sabresd-wm8962",
               "fsl,imx-audio-wm8962";
        model = "wm8962-audio";
        cpu-dai = <&ssi2>;
        audio-codec = <&codec>;
        asrc-controller = <&asrc>;
        audio-routing =
            "Headphone Jack", "HPOUTL",
            "Headphone Jack", "HPOUTR",
            "Ext Spk", "SPKOUTL",
            "Ext Spk", "SPKOUTR",
            "AMIC", "MICBIAS",
            "IN3R", "AMIC",
            "DMIC", "MICBIAS",
            "DMICDAT", "DMIC",
            "CPU-Playback", "ASRC-Playback",
            "Playback", "CPU-Playback",
            "ASRC-Capture", "CPU-Capture",
            "CPU-Capture", "Capture";
        mux-int-port = <2>;
        mux-ext-port = <3>;
        codec-master;
        hp-det-gpios = <&gpio7 8 1>;
        mic-det-gpios = <&gpio1 9 1>;
*/
        compatible = "fsl,imx-audio-sgtl5000";      
        model = "imx6q-sgtl5000";
        ssi-controller = <&ssi1>;
        audio-codec = <&codec>;
        audio-routing = 
            "MIC_IN", "Mic Jack",
            "Mic Jack", "Mic Bias",
            "Headphone Jack", "HP_OUT";
        mux-int-port = <1>;
        mux-ext-port = <3>;
    };
 
    sound-hdmi {
        compatible = "fsl,imx6q-audio-hdmi",
                 "fsl,imx-audio-hdmi";
        model = "imx-audio-hdmi";
        hdmi-controller = <&hdmi_audio>;
    };
 
    mxcfb1: fb@0 {
        compatible = "fsl,mxc_sdc_fb";
        disp_dev = "lcd";
        interface_pix_fmt = "RGB24";
/*      mode_str ="CLAA-WVGA";  */
        mode_str ="1024x600M@60";
        default_bpp = <24>;
        int_clk = <0>;
        late_init = <0>;
        status = "ok";
    };
 
    mxcfb2: fb@1 {
        compatible = "fsl,mxc_sdc_fb";
        disp_dev = "hdmi";
        interface_pix_fmt = "RGB24";
        mode_str ="1920x1080M@60";
        default_bpp = <24>;
        int_clk = <0>;
        late_init = <0>;
        status = "disabled";
    };
 
    mxcfb3: fb@2 {
        compatible = "fsl,mxc_sdc_fb";
        disp_dev = "lcd";
        interface_pix_fmt = "RGB565";
        mode_str ="CLAA-WVGA";
        default_bpp = <16>;
        int_clk = <0>;
        late_init = <0>;
        status = "disabled";
    };
 
    mxcfb4: fb@3 {
        compatible = "fsl,mxc_sdc_fb";
        disp_dev = "ldb";
        interface_pix_fmt = "RGB666";
        default_bpp = <16>;
        int_clk = <0>;
        late_init = <0>;
        status = "disabled";
    };
 
    lcd@0 {
        compatible = "fsl,lcd";
        ipu_id = <0>;
        disp_id = <0>;
        default_ifmt = "RGB565";
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_ipu1>;
        status = "okay";
    };
 
    backlight {
        compatible = "pwm-backlight";
        pwms = <&pwm1 0 5000000>;
        brightness-levels = <0 4 8 16 32 64 128 255>;
        default-brightness-level = <7>;
        status = "okay";
    };
 
    v4l2_cap_0 {
        compatible = "fsl,imx6q-v4l2-capture";
        ipu_id = <0>;
        csi_id = <0>;
        mclk_source = <0>;
        status = "okay";
    };
 
    v4l2_cap_1 {
        compatible = "fsl,imx6q-v4l2-capture";
        ipu_id = <0>;
        csi_id = <1>;
        mclk_source = <0>;
        status = "okay";
    };
 
    v4l2_out {
        compatible = "fsl,mxc_v4l2_output";
        status = "okay";
    };
 
    mipi_dsi_reset: mipi-dsi-reset {
        compatible = "gpio-reset";
        reset-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
        reset-delay-us = <50>;
        #reset-cells = <0>;
    };
};
 
&audmux {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_audmux>;
    status = "okay";
};
&ssi1 {
    fsl,mode = "i2s-slave";
    status = "okay";
}; 
&ssi2 {
        fsl,mode = "i2s-slave";
        status = "okay";
};

&cpu0 {
    arm-supply = <&sw1a_reg>;
    soc-supply = <&sw1c_reg>;
};
 
&clks {
    fsl,ldb-di0-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
    fsl,ldb-di1-parent = <&clks IMX6QDL_CLK_PLL2_PFD0_352M>;
};
 
&ecspi1 {
    fsl,spi-num-chipselects = <1>;
    cs-gpios = <&gpio4 9 0>;
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_ecspi1>;
    status = "okay";
 
    flash: m25p80@0 {
        #address-cells = <1>;
        #size-cells = <1>;
        compatible = "st,m25p32";
        spi-max-frequency = <20000000>;
        reg = <0>;
    };
};
 
&fec {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_enet>;
    phy-mode = "rgmii";
    phy-reset-gpios = <&gpio1 25 0>;
    fsl,magic-packet;
    status = "okay";
};
 
&gpc {
    fsl,ldo-bypass = <1>;
};
 
&dcic1 {
    dcic_id = <0>;
    dcic_mux = "dcic-hdmi";
    status = "okay";
};
 
&dcic2 {
    dcic_id = <1>;
    dcic_mux = "dcic-lvds1";
    status = "okay";
};
 
&hdmi_audio {
    status = "okay";
};
 
&hdmi_cec {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_hdmi_cec>;
    status = "okay";
};
 
&hdmi_core {
    ipu_id = <0>;
    disp_id = <0>;
    status = "okay";
};
 
&hdmi_video {
    fsl,phy_reg_vlev = <0x0294>;
    fsl,phy_reg_cksymtx = <0x800d>;
    HDMI-supply = <&reg_hdmi>;
    status = "okay";
};
 
&i2c1 {
    clock-frequency = <100000>;
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_i2c1>;
    status = "okay";
    def_speed = <50>;   
 
    edt-ft5x06@38{
            compatible = "edt,edt-ft5306";
        reg = <0x38>;
        pinctrl-names = "default";
/*
        pinctrl-0 = <&pinctrl_edt_ft5x06>;
*/
        interrupt-parent = <&gpio1>;
        interrupts = <9 2>;
        rst-gpios = <&gpio1 5 1>;   /* active high: SD1_DAT1 */
        touchscreen-size-x = <1024>;    
            touchscreen-size-y = <600>;
 
/*
            touchscreen-swap = <1>;    
            touchscreen-revert-x = <1>;
        touchscreen-revert-y = <1>;
*/
    };
/*
 
    gt811@5d {  
            compatible = "gt811,gt811_ts";
        pinctrl-names = "default";
        reg = <0x5d>;
        interrupt-parent = <&gpio1>;
        interrupts = <9 2>;
        gpios = <&gpio1 5 0>;
        
        touchscreen-size-x = <1024>;    
            touchscreen-size-y = <600>;
 
            touchscreen-swap = <1>;    
            touchscreen-revert-x = <1>;
        touchscreen-revert-y = <1>;
    }; 
*/
/*  codec: wm8962@1a {
        compatible = "wlf,wm8962";
        reg = <0x1a>;
        clocks = <&clks IMX6QDL_CLK_CKO>;
        DCVDD-supply = <&reg_audio>;
        DBVDD-supply = <&reg_audio>;
        AVDD-supply = <&reg_audio>;
        CPVDD-supply = <&reg_audio>;
        MICVDD-supply = <&reg_audio>;
        PLLVDD-supply = <&reg_audio>;
        SPKVDD1-supply = <&reg_audio>;
        SPKVDD2-supply = <&reg_audio>;
        gpio-cfg = <
            0x0000 /* 0:Default */
/*          0x0000 /* 1:Default */
/*          0x0013 /* 2:FN_DMICCLK*/ 
/*          0x0000 /* 3:Default */
/*          0x8014 /* 4:FN_DMICCDAT*/ 
/*          0x0000 /* 5:Default */
/*      >;
        amic-mono;
       };
 */
    mma8451@1c {
        compatible = "fsl,mma8451";
        reg = <0x1c>;
        position = <0>;
        vdd-supply = <&reg_sensor>;
        vddio-supply = <&reg_sensor>;
        interrupt-parent = <&gpio1>;
        interrupts = <18 8>;
        interrupt-route = <1>;
    };
 
    ov564x: ov564x@3c {
        compatible = "ovti,ov564x";
        reg = <0x3c>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_ipu1_2>;
        clocks = <&clks IMX6QDL_CLK_CKO>;
        clock-names = "csi_mclk";
        DOVDD-supply = <&vgen4_reg>; /* 1.8v */
        AVDD-supply = <&vgen3_reg>;  /* 2.8v, on rev C board is VGEN3,
                        on rev B board is VGEN5 */
        DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
        pwn-gpios = <&gpio1 16 1>;   /* active low: SD1_DAT0 */
        rst-gpios = <&gpio1 17 0>;   /* active high: SD1_DAT1 */
        csi_id = <0>;
        mclk = <24000000>;
        mclk_source = <0>;
    };
};
 
&i2c2 {
    clock-frequency = <100000>;
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_i2c2>;
    status = "okay";
 
    egalax_ts@04 {
        compatible = "eeti,egalax_ts";
        reg = <0x04>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c2_egalax_int>;
        interrupt-parent = <&gpio6>;
        interrupts = <8 2>;
        wakeup-gpios = <&gpio6 8 GPIO_ACTIVE_HIGH>;
    };
 
    max11801@48 {
        compatible = "maxim,max11801";
        reg = <0x48>;
        interrupt-parent = <&gpio3>;
        interrupts = <26 2>;
        work-mode = <1>;/*DCM mode*/
    };
    codec: sgtl5000@0a {
                compatible = "fsl,sgtl5000";
                reg = <0x0a>;
                clocks = <&clks 201>;
                VDDA-supply = <&reg_2p5v>;
                VDDIO-supply = <&reg_3p3v>;
                /*VDDD-supply = <&reg_1p2v>;*/
        };
 
    pmic: pfuze100@08 {
        compatible = "fsl,pfuze100";
        reg = <0x08>;
 
        regulators {
            sw1a_reg: sw1ab {
                regulator-min-microvolt = <300000>;
                regulator-max-microvolt = <1875000>;
                regulator-boot-on;
                regulator-always-on;
                regulator-ramp-delay = <6250>;
            };
 
            sw1c_reg: sw1c {
                regulator-min-microvolt = <300000>;
                regulator-max-microvolt = <1875000>;
                regulator-boot-on;
                regulator-always-on;
                regulator-ramp-delay = <6250>;
            };
 
            sw2_reg: sw2 {
                regulator-min-microvolt = <800000>;
                regulator-max-microvolt = <3300000>;
                regulator-boot-on;
                regulator-always-on;
                regulator-ramp-delay = <6250>;
            };
 
            sw3a_reg: sw3a {
                regulator-min-microvolt = <400000>;
                regulator-max-microvolt = <1975000>;
                regulator-boot-on;
                regulator-always-on;
            };
 
            sw3b_reg: sw3b {
                regulator-min-microvolt = <400000>;
                regulator-max-microvolt = <1975000>;
                regulator-boot-on;
                regulator-always-on;
            };
 
            sw4_reg: sw4 {
                regulator-min-microvolt = <800000>;
                regulator-max-microvolt = <3300000>;
            };
 
            swbst_reg: swbst {
                regulator-min-microvolt = <5000000>;
                regulator-max-microvolt = <5150000>;
            };
 
            snvs_reg: vsnvs {
                regulator-min-microvolt = <1000000>;
                regulator-max-microvolt = <3000000>;
                regulator-boot-on;
                regulator-always-on;
            };
 
            vref_reg: vrefddr {
                regulator-boot-on;
                regulator-always-on;
            };
 
            vgen1_reg: vgen1 {
                regulator-min-microvolt = <800000>;
                regulator-max-microvolt = <1550000>;
            };
 
            vgen2_reg: vgen2 {
                regulator-min-microvolt = <800000>;
                regulator-max-microvolt = <1550000>;
            };
 
            vgen3_reg: vgen3 {
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
            };
 
            vgen4_reg: vgen4 {
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                regulator-always-on;
            };
 
            vgen5_reg: vgen5 {
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                regulator-always-on;
            };
 
            vgen6_reg: vgen6 {
                regulator-min-microvolt = <1800000>;
                regulator-max-microvolt = <3300000>;
                regulator-always-on;
            };
        };
    };
 
    hdmi: edid@50 {
        compatible = "fsl,imx6-hdmi-i2c";
        reg = <0x50>;
    };
 
    ov564x_mipi: ov564x_mipi@3c { /* i2c2 driver */
        compatible = "ovti,ov564x_mipi";
        reg = <0x3c>;
        clocks = <&clks 201>;
        clock-names = "csi_mclk";
        DOVDD-supply = <&vgen4_reg>; /* 1.8v */
        AVDD-supply = <&vgen3_reg>;  /* 2.8v, rev C board is VGEN3
                        rev B board is VGEN5 */
        DVDD-supply = <&vgen2_reg>;  /* 1.5v*/
        pwn-gpios = <&gpio1 19 1>;   /* active low: SD1_CLK */
        rst-gpios = <&gpio1 20 0>;   /* active high: SD1_DAT2 */
        csi_id = <1>;
        mclk = <24000000>;
        mclk_source = <0>;
    };
};
 
&i2c3 {
    clock-frequency = <100000>;
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_i2c3>;
    status = "okay";
 
    egalax_ts@04 {
        compatible = "eeti,egalax_ts";
        reg = <0x04>;
        pinctrl-names = "default";
        pinctrl-0 = <&pinctrl_i2c3_egalax_int>;
        interrupt-parent = <&gpio6>;
        interrupts = <7 2>;
        wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
    };
 
    isl29023@44 {
        compatible = "fsl,isl29023";
        reg = <0x44>;
        rext = <499>;
        vdd-supply = <&reg_sensor>;
        interrupt-parent = <&gpio3>;
        interrupts = <9 2>;
    };
 
    mag3110@0e {
        compatible = "fsl,mag3110";
        reg = <0x0e>;
        position = <2>;
        vdd-supply = <&reg_sensor>;
        vddio-supply = <&reg_sensor>;
        interrupt-parent = <&gpio3>;
        interrupts = <16 1>;
    };
};
 
&iomuxc {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_hog>;
    imx6qdl-sabresd {
        pinctrl_hog: hoggrp {
            fsl,pins = <
                MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000
                MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000
                MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000
                MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000
    
                MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x130b0
                /*MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000*/
        
                MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000
                MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
                MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x80000000
                MX6QDL_PAD_EIM_D26__GPIO3_IO26 0x80000000
                MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x80000000
                MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x80000000
                MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x80000000
                MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000
                MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000
                MX6QDL_PAD_SD1_CMD__GPIO1_IO18 0x80000000
                MX6QDL_PAD_EIM_D16__GPIO3_IO16 0x80000000
                MX6QDL_PAD_SD3_RST__GPIO7_IO08  0x80000000
                MX6QDL_PAD_GPIO_9__GPIO1_IO09   0x80000000
                MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x80000000
                MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000
                MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000
                MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000
                MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000
            >;
        };
 
        pinctrl_audmux: audmuxgrp {
            fsl,pins = <
                MX6QDL_PAD_CSI0_DAT7__AUD3_RXD      0x130b0
                MX6QDL_PAD_CSI0_DAT4__AUD3_TXC      0x130b0
                MX6QDL_PAD_CSI0_DAT5__AUD3_TXD      0x110b0
                MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS     0x130b0
            >;
        };
 
        pinctrl_ecspi1: ecspi1grp {
            fsl,pins = <
                MX6QDL_PAD_KEY_COL1__ECSPI1_MISO    0x100b1
                MX6QDL_PAD_KEY_ROW0__ECSPI1_MOSI    0x100b1
                MX6QDL_PAD_KEY_COL0__ECSPI1_SCLK    0x100b1
                MX6QDL_PAD_KEY_ROW1__GPIO4_IO09     0x1b0b0
            >;
        };
 
        pinctrl_i2c2_egalax_int: egalax_i2c2_intgrp {
            fsl,pins = <
                MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x80000000
            >;
        };
 
        pinctrl_i2c3_egalax_int: egalax_i2c3_intgrp {
            fsl,pins = <
                MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000
            >;
        };
 
        pinctrl_enet: enetgrp {
            fsl,pins = <
                MX6QDL_PAD_ENET_MDIO__ENET_MDIO     0x1b0b0
                MX6QDL_PAD_ENET_MDC__ENET_MDC       0x1b0b0
                MX6QDL_PAD_RGMII_TXC__RGMII_TXC     0x1b0b0
                MX6QDL_PAD_RGMII_TD0__RGMII_TD0     0x1b0b0
                MX6QDL_PAD_RGMII_TD1__RGMII_TD1     0x1b0b0
                MX6QDL_PAD_RGMII_TD2__RGMII_TD2     0x1b0b0
                MX6QDL_PAD_RGMII_TD3__RGMII_TD3     0x1b0b0
                MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x1b0b0
                MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x1b0b0
                MX6QDL_PAD_RGMII_RXC__RGMII_RXC     0x1b0b0
                MX6QDL_PAD_RGMII_RD0__RGMII_RD0     0x1b0b0
                MX6QDL_PAD_RGMII_RD1__RGMII_RD1     0x1b0b0
                MX6QDL_PAD_RGMII_RD2__RGMII_RD2     0x1b0b0
                MX6QDL_PAD_RGMII_RD3__RGMII_RD3     0x1b0b0
                MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b0b0
                MX6QDL_PAD_GPIO_16__ENET_REF_CLK    0x4001b0a8
            >;
        };
 
        pinctrl_enet_irq: enetirqgrp {
            fsl,pins = <
                MX6QDL_PAD_GPIO_6__ENET_IRQ     0x000b1
            >;
        };
 
        pinctrl_gpio_keys: gpio_keysgrp {
            fsl,pins = <
                MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b0
                MX6QDL_PAD_GPIO_4__GPIO1_IO04  0x1b0b0
/*
                MX6QDL_PAD_GPIO_5__GPIO1_IO05  0x1b0b0
*/
            >;
        };
 
        pinctrl_hdmi_cec: hdmicecgrp {
            fsl,pins = <
                MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x108b0
            >;
        };
 
        pinctrl_hdmi_hdcp: hdmihdcpgrp {
            fsl,pins = <
                MX6QDL_PAD_KEY_COL3__HDMI_TX_DDC_SCL 0x4001b8b1
                MX6QDL_PAD_KEY_ROW3__HDMI_TX_DDC_SDA 0x4001b8b1
            >;
        };
 
        pinctrl_edt_ft5x06: edt-ft5x06grp {
            fsl,pins = <
                MX6QDL_PAD_CSI0_DAT8__I2C1_SDA      0x4001b8b1
                MX6QDL_PAD_CSI0_DAT9__I2C1_SCL      0x4001b8b1
            >;
        };
 
        pinctrl_i2c1: i2c1grp {
            fsl,pins = <
                MX6QDL_PAD_CSI0_DAT8__I2C1_SDA      0x4001b8b1
                MX6QDL_PAD_CSI0_DAT9__I2C1_SCL      0x4001b8b1
            >;
        };
 
        pinctrl_i2c2: i2c2grp {
            fsl,pins = <
                MX6QDL_PAD_KEY_COL3__I2C2_SCL       0x4001b8b1
                MX6QDL_PAD_KEY_ROW3__I2C2_SDA       0x4001b8b1
            >;
        };
 
        pinctrl_i2c3: i2c3grp {
            fsl,pins = <
                MX6QDL_PAD_GPIO_3__I2C3_SCL     0x4001b8b1
                MX6QDL_PAD_GPIO_6__I2C3_SDA     0x4001b8b1
            >;
        };
 
        pinctrl_ipu1: ipu1grp {
            fsl,pins = <
                MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x10
                MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x10
                MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x10
                MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x10
                MX6QDL_PAD_DI0_PIN4__IPU1_DI0_PIN04        0x80000000
                MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x10
                MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x10
                MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x10
                MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x10
                MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x10
                MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x10
                MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x10
                MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x10
                MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x10
                MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x10
                MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x10
                MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x10
                MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x10
                MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x10
                MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x10
                MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x10
                MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x10
                MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x10
                MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18  0x10
                MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19  0x10
                MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20  0x10
                MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21  0x10
                MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22  0x10
                MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23  0x10
            >;
        };
 
        pinctrl_ipu1_2: ipu1grp-2 { /* parallel camera */
            fsl,pins = <
                MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12    0x80000000
                MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13    0x80000000
                MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14    0x80000000
                MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15    0x80000000
                MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16    0x80000000
                MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17    0x80000000
                MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18    0x80000000
                MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19    0x80000000
                MX6QDL_PAD_CSI0_DATA_EN__IPU1_CSI0_DATA_EN 0x80000000
                MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK   0x80000000
                MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC      0x80000000
                MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC     0x80000000
                MX6QDL_PAD_SD1_DAT1__GPIO1_IO17            0x80000000
                MX6QDL_PAD_SD1_DAT0__GPIO1_IO16            0x80000000
            >;
        };
 
        pinctrl_pcie: pciegrp {
            fsl,pins = <
                MX6QDL_PAD_GPIO_17__GPIO7_IO12  0x1b0b0
            >;
        };
 
        pinctrl_pcie_reg: pciereggrp {
            fsl,pins = <
                MX6QDL_PAD_EIM_D19__GPIO3_IO19  0x1b0b0
            >;
        };
 
        pinctrl_pwm1: pwm1grp {
            fsl,pins = <
                MX6QDL_PAD_SD1_DAT3__PWM1_OUT       0x1b0b1
            >;
        };
 
        pinctrl_uart1: uart1grp {
            fsl,pins = <
                /*MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA  0x1b0b1
                MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA    0x1b0b1*/
                MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA  0x1b0b1
                MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA  0x1b0b1
            >;
        };
 
        pinctrl_uart5_1: uart5grp-1 {
            fsl,pins = <
                MX6QDL_PAD_KEY_COL1__UART5_TX_DATA  0x1b0b1
                MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA  0x1b0b1
                MX6QDL_PAD_KEY_COL4__UART5_RTS_B    0x1b0b1
                MX6QDL_PAD_KEY_ROW4__UART5_CTS_B    0x1b0b1
            >;
        };
 
        pinctrl_uart5dte_1: uart5dtegrp-1 {
            fsl,pins = <
                MX6QDL_PAD_KEY_ROW1__UART5_TX_DATA  0x1b0b1
                MX6QDL_PAD_KEY_COL1__UART5_RX_DATA  0x1b0b1
                MX6QDL_PAD_KEY_ROW4__UART5_RTS_B    0x1b0b1
                MX6QDL_PAD_KEY_COL4__UART5_CTS_B    0x1b0b1
            >;
        };
 
        pinctrl_usbotg: usbotggrp {
            fsl,pins = <
                MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID   0x17059
            >;
        };
 
        pinctrl_usdhc2: usdhc2grp {
            fsl,pins = <
                MX6QDL_PAD_SD2_CMD__SD2_CMD     0x17059
                MX6QDL_PAD_SD2_CLK__SD2_CLK     0x10059
                MX6QDL_PAD_SD2_DAT0__SD2_DATA0      0x17059
                MX6QDL_PAD_SD2_DAT1__SD2_DATA1      0x17059
                MX6QDL_PAD_SD2_DAT2__SD2_DATA2      0x17059
                MX6QDL_PAD_SD2_DAT3__SD2_DATA3      0x17059
/*
                MX6QDL_PAD_NANDF_D4__SD2_DATA4      0x17059
                MX6QDL_PAD_NANDF_D5__SD2_DATA5      0x17059
                MX6QDL_PAD_NANDF_D6__SD2_DATA6      0x17059
                MX6QDL_PAD_NANDF_D7__SD2_DATA7      0x17059
*/
            >;
        };
 
        pinctrl_usdhc3: usdhc3grp {
            fsl,pins = <
                MX6QDL_PAD_SD3_CMD__SD3_CMD     0x17059
                MX6QDL_PAD_SD3_CLK__SD3_CLK     0x10059
                MX6QDL_PAD_SD3_DAT0__SD3_DATA0      0x17059
                MX6QDL_PAD_SD3_DAT1__SD3_DATA1      0x17059
                MX6QDL_PAD_SD3_DAT2__SD3_DATA2      0x17059
                MX6QDL_PAD_SD3_DAT3__SD3_DATA3      0x17059
                MX6QDL_PAD_SD3_DAT4__SD3_DATA4      0x17059
                MX6QDL_PAD_SD3_DAT5__SD3_DATA5      0x17059
/*
                MX6QDL_PAD_SD3_DAT6__SD3_DATA6      0x17059
                MX6QDL_PAD_SD3_DAT7__SD3_DATA7      0x17059
*/
            >;
        };
 
        pinctrl_usdhc4: usdhc4grp {
            fsl,pins = <
                MX6QDL_PAD_SD4_CMD__SD4_CMD     0x17059
                MX6QDL_PAD_SD4_CLK__SD4_CLK     0x10059
                MX6QDL_PAD_SD4_DAT0__SD4_DATA0      0x17059
                MX6QDL_PAD_SD4_DAT1__SD4_DATA1      0x17059
                MX6QDL_PAD_SD4_DAT2__SD4_DATA2      0x17059
                MX6QDL_PAD_SD4_DAT3__SD4_DATA3      0x17059
                MX6QDL_PAD_SD4_DAT4__SD4_DATA4      0x17059
                MX6QDL_PAD_SD4_DAT5__SD4_DATA5      0x17059
                MX6QDL_PAD_SD4_DAT6__SD4_DATA6      0x17059
                MX6QDL_PAD_SD4_DAT7__SD4_DATA7      0x17059
            >;
        };
 
        pinctrl_wdog: wdoggrp {
            fsl,pins = <
                MX6QDL_PAD_GPIO_1__WDOG2_B 0x80000000
            >;
        };
    };
 
    gpio_leds {
        pinctrl_gpio_leds: gpioledsgrp {
            fsl,pins = <
                MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
            >;
        };
    };
};
 
&ldb {
    status = "okay";
 
    lvds-channel@0 {
        fsl,data-mapping = "spwg";
        fsl,data-width = <18>;
        status = "okay";
 
        display-timings {
            native-mode = <&timing0>;
            timing0: hsd100pxn1 {
                clock-frequency = <65000000>;
                hactive = <1024>;
                vactive = <768>;
                hback-porch = <220>;
                hfront-porch = <40>;
                vback-porch = <21>;
                vfront-porch = <7>;
                hsync-len = <60>;
                vsync-len = <10>;
            };
        };
    };
 
    lvds-channel@1 {
        fsl,data-mapping = "spwg";
        fsl,data-width = <18>;
        primary;
        status = "okay";
 
        display-timings {
            native-mode = <&timing1>;
            timing1: hsd100pxn1 {
                clock-frequency = <65000000>;
                hactive = <1024>;
                vactive = <768>;
                hback-porch = <220>;
                hfront-porch = <40>;
                vback-porch = <21>;
                vfront-porch = <7>;
                hsync-len = <60>;
                vsync-len = <10>;
            };
        };
    };
};
 
&mipi_csi {
    status = "okay";
    ipu_id = <0>;
    csi_id = <1>;
    v_channel = <0>;
    lanes = <2>;
};
 
&mipi_dsi {
    dev_id = <0>;
    disp_id = <1>;
    lcd_panel = "TRULY-WVGA";
    disp-power-on-supply = <&reg_mipi_dsi_pwr_on>;
    resets = <&mipi_dsi_reset>;
    status = "okay";
};
 
&pcie {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_pcie>;
    reset-gpio = <&gpio7 12 0>;
    status = "okay";
};
 
&pwm1 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_pwm1>;
    status = "okay";
};
 
&snvs_poweroff {
    status = "okay";
};
 
&ssi2 {
    status = "okay";
};
 
&uart1 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_uart1>;
    status = "okay";
};
 
&usbh1 {
    vbus-supply = <&reg_usb_h1_vbus>;
    status = "okay";
};
 
&usbotg {
    vbus-supply = <&reg_usb_otg_vbus>;
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_usbotg>;
    disable-over-current;
    srp-disable;
    hnp-disable;
    adp-disable;
    status = "okay";
};
 
&usbphy1 {
    tx-d-cal = <0x5>;
};
 
&usbphy2 {
    tx-d-cal = <0x5>;
};
 
&usdhc2 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_usdhc2>;
    bus-width = <8>; 
    cd-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
    wp-gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
    no-1-8-v;
    keep-power-in-suspend;
    enable-sdio-wakeup;
    status = "okay";
};
 
&usdhc3 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_usdhc3>;
    bus-width = <8>;
    cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
    wp-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
    no-1-8-v;
    keep-power-in-suspend;
    enable-sdio-wakeup;
    status = "okay";
};
 
&usdhc4 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_usdhc4>;
    bus-width = <8>;
    non-removable;
    no-1-8-v;
    keep-power-in-suspend;
    status = "okay";
};
 
&wdog1 {
    status = "disabled";
};
 
&wdog2 {
    pinctrl-names = "default";
    pinctrl-0 = <&pinctrl_wdog>;
    fsl,wdog_b;
    status = "okay";
};


最后编辑于
©著作权归作者所有,转载或内容合作请联系作者
  • 序言:七十年代末,一起剥皮案震惊了整个滨河市,随后出现的几起案子,更是在滨河造成了极大的恐慌,老刑警刘岩,带你破解...
    沈念sama阅读 212,332评论 6 493
  • 序言:滨河连续发生了三起死亡事件,死亡现场离奇诡异,居然都是意外死亡,警方通过查阅死者的电脑和手机,发现死者居然都...
    沈念sama阅读 90,508评论 3 385
  • 文/潘晓璐 我一进店门,熙熙楼的掌柜王于贵愁眉苦脸地迎上来,“玉大人,你说我怎么就摊上这事。” “怎么了?”我有些...
    开封第一讲书人阅读 157,812评论 0 348
  • 文/不坏的土叔 我叫张陵,是天一观的道长。 经常有香客问我,道长,这世上最难降的妖魔是什么? 我笑而不...
    开封第一讲书人阅读 56,607评论 1 284
  • 正文 为了忘掉前任,我火速办了婚礼,结果婚礼上,老公的妹妹穿的比我还像新娘。我一直安慰自己,他们只是感情好,可当我...
    茶点故事阅读 65,728评论 6 386
  • 文/花漫 我一把揭开白布。 她就那样静静地躺着,像睡着了一般。 火红的嫁衣衬着肌肤如雪。 梳的纹丝不乱的头发上,一...
    开封第一讲书人阅读 49,919评论 1 290
  • 那天,我揣着相机与录音,去河边找鬼。 笑死,一个胖子当着我的面吹牛,可吹牛的内容都是我干的。 我是一名探鬼主播,决...
    沈念sama阅读 39,071评论 3 410
  • 文/苍兰香墨 我猛地睁开眼,长吁一口气:“原来是场噩梦啊……” “哼!你这毒妇竟也来了?” 一声冷哼从身侧响起,我...
    开封第一讲书人阅读 37,802评论 0 268
  • 序言:老挝万荣一对情侣失踪,失踪者是张志新(化名)和其女友刘颖,没想到半个月后,有当地人在树林里发现了一具尸体,经...
    沈念sama阅读 44,256评论 1 303
  • 正文 独居荒郊野岭守林人离奇死亡,尸身上长有42处带血的脓包…… 初始之章·张勋 以下内容为张勋视角 年9月15日...
    茶点故事阅读 36,576评论 2 327
  • 正文 我和宋清朗相恋三年,在试婚纱的时候发现自己被绿了。 大学时的朋友给我发了我未婚夫和他白月光在一起吃饭的照片。...
    茶点故事阅读 38,712评论 1 341
  • 序言:一个原本活蹦乱跳的男人离奇死亡,死状恐怖,灵堂内的尸体忽然破棺而出,到底是诈尸还是另有隐情,我是刑警宁泽,带...
    沈念sama阅读 34,389评论 4 332
  • 正文 年R本政府宣布,位于F岛的核电站,受9级特大地震影响,放射性物质发生泄漏。R本人自食恶果不足惜,却给世界环境...
    茶点故事阅读 40,032评论 3 316
  • 文/蒙蒙 一、第九天 我趴在偏房一处隐蔽的房顶上张望。 院中可真热闹,春花似锦、人声如沸。这庄子的主人今日做“春日...
    开封第一讲书人阅读 30,798评论 0 21
  • 文/苍兰香墨 我抬头看了看天上的太阳。三九已至,却和暖如春,着一层夹袄步出监牢的瞬间,已是汗流浃背。 一阵脚步声响...
    开封第一讲书人阅读 32,026评论 1 266
  • 我被黑心中介骗来泰国打工, 没想到刚下飞机就差点儿被人妖公主榨干…… 1. 我叫王不留,地道东北人。 一个月前我还...
    沈念sama阅读 46,473评论 2 360
  • 正文 我出身青楼,却偏偏与公主长得像,于是被迫代替她去往敌国和亲。 传闻我的和亲对象是个残疾皇子,可洞房花烛夜当晚...
    茶点故事阅读 43,606评论 2 350

推荐阅读更多精彩内容

  • (两年前的文章)原作者没有署名,在此标明转载文章,源自QQ空间日志,侵删 1:主板故障 2:显卡故障 3:声卡故障...
    aclihui阅读 2,166评论 0 10
  • 学习stm32gpio 学习linux 程序员的三大方向 程序员的方向,一般可以分为3类:专业领域、业务领域、操作...
    王公民阅读 746评论 0 3
  • 姓名:吴兆阳 学号:14020199009 转自韦东山 嵌牛导读:对嵌入式初学者,没有足够的视野选择一个合适投入方...
    吴兆阳阅读 2,380评论 0 4
  • 前言 距离去年正式开始折腾黑苹果,到现在已有一年半的时间,在这段时间里,从自以为了解系统(曾经安装过很多版本的wi...
    LF落风阅读 93,350评论 70 149
  • RN 的 Flexbox 布局的学习笔记 1.什么是 Flexbox 布局? Flexbox,弹性布局,可以以响应...
    一铭_阅读 788评论 0 1