一 、下载安装包
- http://ffmpeg.org/download.html
- https://www.videolan.org/developers/x264.html
- https://www.videolan.org/developers/x265.html
- https://pan.baidu.com/s/1hUx9Qb3KeRPwLSw35jE-Lg 提取码kkoj
-
http://www.linuxfromscratch.org/blfs/view/svn/multimedia/fdk-aac.html
https://blog.csdn.net/qq_37275444/article/details/90511542
https://bitbucket.org/multicoreware/x265/downloads/
二、安装gcc
- 查看服务器是否安装gcc
执行gcc --version
出现如上结果需要安装
执行 yum install gcc
装好后
三 、安装bzip2 用于解压
执行：`yum -y install bzip2'
四 、安装yasm
- 解压yasm
执行:tar -zxvf yasm-1.3.0.tar.gz - 进入解压目录
执行:cd yasm-1.3.0 - 编译和安装
执行1：./configure
执行2：make
执行3：make install - 查看安装结果
执行yasm --version
五 、安装nasm
- 解压nasm
执行:tar jxvf nasm-2.13.tar.bz2 - 进入目录
执行：cd nasm-2.13 - 编译和安装
执行1：./configure
执行2：make
执行3：make install -
查看安装结果
六 、编译libx264
- 解压x264
执行:tar jxvf last_x264.tar.bz2 - 进入解压目录
cd x264-snapshot-20190522-2245/ - 编写编译脚本
build_x264.sh放到 x264-snapshot-20190522-2245/ 目录里
#!/bin/bash
PREFIX=../ffmpeg/thirdparty/libx264
function build_one
{
./configure \
--enable-asm \
--prefix=$PREFIX \
--enable-static \
--enable-pic \
--enable-strip \
make
make install
}
build_one
4.编译
执行 ./build_x264.sh
七、编译libx265
- 加压
tar -xzvf x265_3.3.tar.gz
cd x265_3.3/build/linux
2 修改脚本文件 make-Makefiles.bash
#!/bin/bash
# Run this from within a bash shell
cmake -G "Unix Makefiles" -DCMAKE_INSTALL_PREFIX=/root/gupan/linux-ffmpeg/ffmpeg/thirdparty/libx265 -DENABLE_LIBNUMA:bool=off -DENABLE_SHARED:bool=on ../../source
3.执行
make clean
sh make-Makefiles.bash
make
make install
八、编译libfdk-aac
tar -xzvf fdk-aac-2.0.1.tar.gz
cd fdk-aac-2.0.1
2.编写编译脚本
build_fdk-aac.sh 放到fdk-aac/ 目录里
#!/bin/bash
PREFIX=/root/gupan/linux-ffmpeg/ffmpeg/thirdparty/libfdk-aac
function build_one
{
./configure \
--prefix=$PREFIX\
make
make install
}
build_one
3.执行脚本
./build_fdk-aac.sh
报错
解决办法：在linux终端下执行 ：autoreconf -vfi
九、编译librtmp
- 下载代码
下载地址
rtmpdump-2.3.tgz
- 解压
执行：tar -xzvf rtmpdump-2.3.tgz
3.安装依赖库
- openssl
http://www.openssl.org/ 我下的是1.0.1f版本。
tar zxvf openssl-1.0.1f.tar.gz
cd openssl-1.0.1f
./config --prefix=/usr
make
sudo make install
- zlib
然后安装zlib：
http://www.zlib.net/
tar zxvf zlib-1.2.11.tar.gz ，解压时出现一点错误，但是不要仅。
cd zlib-1.2.11
make test （参数是看了readme后加的）
sudo make install
3.进入
执行：cd rtmpdump-2.3/
4.编译
- 修改makefile目标位置
- LDFLAGS=-Wall $(XLDFLAGS) -ldl
- make
-执行脚本
install.sh
#!/bin/bash
prefix=/root/gupan/linux-ffmpeg/ffmpeg/thirdparty/librtmp
mkdir -p $prefix $prefix/lib $prefix/include $prefix/man3 $prefix/pkgconfig
cd librtmp
cp amf.h http.h log.h rtmp.h $prefix/include
cp librtmp.a $prefix/lib
cp librtmp.pc $prefix/pkgconfig
cp librtmp.3 $prefix/man3
cp librtmp.so $prefix/lib
cp librtmp.so.0 $prefix/lib
十、编译ffmpeg
解压fmepg
tar jxvf ffmpeg-4.1.3.tar.bz2移动thirdparty 文件夹到 ffmpeg-4.1.3.
mv ./ffmpeg/thirdparty/ ffmpeg-4.1.3
重命名文件夹为 ffmpeg
3.编写编译脚本
build_ffmpeg.sh
#!/bin/bash
basepath=$(cd `dirname $0`; pwd)
THIRDPARTYPATH=$basepath/thirdparty
LIBX264_INCLUDE=$THIRDPARTYPATH/libx264/include
LIBX264_LIB=$THIRDPARTYPATH/libx264/lib
LIBX265_INCLUDE=$THIRDPARTYPATH/libx265/include
LIBX265_LIB=$THIRDPARTYPATH/libx265/lib
LIBOPUS_INCLUDE=$THIRDPARTYPATH/libopus/include
LIBOPUS_LIB=$THIRDPARTYPATH/libopus/lib
#LIBMP3LAME_INCLUDE=$THIRDPARTYPATH/libmp3lame/include
#LIBMP3LAME_LIB=$THIRDPARTYPATH/libmp3lame/lib
#LIBSPEEX_INCLUDE=$THIRDPARTYPATH/libspeex/include
#LIBSPEEX_LIB=$THIRDPARTYPATH/libspeex/lib
#LIBVPX_INCLUDE=$THIRDPARTYPATH/libvpx/include
#LIBVPX_LIB=$THIRDPARTYPATH/libvpx/lib
#LIBILBC_INCLUDE=$THIRDPARTYPATH/libilbc/include
#LIBILBC_LIB=$THIRDPARTYPATH/libilbc/lib
#LIBOPENCV_INCLUDE=$THIRDPARTYPATH/libopencv/install/include
#LIBOPENCV_LIB=$THIRDPARTYPATH/libopencv/lib
#LIBOPENSSL_INCLUDE=$THIRDPARTYPATH/libopenssl/include
#LIBOPENSSL_LIB=$THIRDPARTYPATH/libopenssl/lib
function build_one
{
./configure \
--prefix=$PREFIX \
--extra-cflags="-I$LIBX264_INCLUDE -I$LIBX265_INCLUDE -I$LIBOPUS_INCLUDE -O4 -g" \
--extra-ldflags="-L$LIBX264_LIB -L$LIBX265_LIB -L$LIBOPUS_LIB -lpthread -ldl" \
--disable-shared \
--enable-static \
--enable-gpl \
--enable-nonfree \
--enable-version3 \
--enable-pthreads \
--disable-small \
--disable-network \
--enable-iconv \
--disable-x86asm \
--enable-libx264 \
--enable-libx265 \
--enable-libopus \
--enable-encoder=aac \
--enable-encoder=mpeg4 \
--enable-encoder=mjpeg \
--enable-encoder=png \
--enable-muxer=mov \
--enable-muxer=mp4 \
--enable-muxer=adts \
--enable-muxer=h264 \
--enable-muxer=mjpeg \
--disable-decoders \
--enable-decoder=pcm_mulaw \
--enable-decoder=aac \
--enable-decoder=aac_latm \
--enable-decoder=mp3 \
--enable-decoder=h264 \
--enable-decoder=mpeg4 \
--enable-decoder=mjpeg \
--enable-decoder=png \
--disable-demuxers \
--enable-demuxer=image2 \
--enable-demuxer=h264 \
--enable-demuxer=aac \
--enable-demuxer=mp3 \
--enable-demuxer=mpc \
--enable-demuxer=mpegts \
--enable-demuxer=mov \
--disable-parsers \
--enable-parser=aac \
--enable-parser=ac3 \
--enable-parser=h264 \
--disable-protocols \
--enable-protocol=file \
--enable-protocol=concat \
--enable-filters \
--disable-outdevs \
--disable-doc \
--disable-debug \
--disable-ffprobe \
--disable-postproc \
--disable-avdevice \
--disable-symver \
--disable-stripping \
--disable-encoder=aac \
--disable-decoder=aac \
--enable-encoder=libfdk_aac \
--enable-decoder=libfdk_aac \
--enable-encoder=libfdk_aac \
--enable-decoder=libfdk_aac \
--enable-libfdk-aac
$ADDITIONAL_CONFIGURE_FLAG
# make -j8
# make install
}
# arm v7vfp
CPU=
#OPTIMIZE_CFLAGS="-mfloat-abi=softfp -mfpu=vfp -marm -march=armv7-a "
OPTIMIZE_CFLAGS="-Wno-deprecated-declarations"
ADDI_CFLAGS=""
PREFIX=./out
build_one
执行脚本
