day13 读写分离架构--Atlas及分布式架构MyCAT

上周结尾：

一、一套烂的MHA环境的检查及修复思路

1.1 检查MHA的运行状态
[root@db03~]# masterha_check_status --conf=/etc/mha/app1.cnf
app1 is stopped(2:NOT_RUNNING).

1.2 判断主节点
虚拟机中，需要先将所有节点启动
systemctl start mysqld
直接的方法，看哪台mysql没有从库状态，结合从库的mysql指向位置

1.3 恢复一主两从的状态
db03：
[root@db03~]# grep -i 'change master to' /var/log/mha/app1/manager
Fri Jun 28 18:26:52 2019 - [info]  All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='10.0.0.52', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx';
Fri Jun 28 20:32:57 2019 - [info]  All other slaves should start replication from here. Statement should be: CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='xxx';

mysql> CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3306, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';
mysql> start slave;

1.4 检查VIP
db01：
[root@db01 ~]# ifconfig eth0:1 10.0.0.55/24

1.5 检查配置文件
db03：
[server1]
hostname=10.0.0.51
port=3306

[server2]
hostname=10.0.0.52
port=3306

[server3]
hostname=10.0.0.53
port=3306

1.6 启动前预检查
[root@db03~]# masterha_check_ssh --conf=/etc/mha/app1.cnf
[root@db03~]# masterha_check_repl --conf=/etc/mha/app1.cnf

1.7 启动MHA
nohup masterha_manager --conf=/etc/mha/app1.cnf --remove_dead_master_conf --ignore_last_failover  < /dev/null> /var/log/mha/app1/manager.log 2>&1 &
以下为正常启动后的状态：
[root@db03 ~]# masterha_check_status --conf=/etc/mha/app1.cnf 
app1 (pid:22419) is running(0:PING_OK), master:10.0.0.51

二、Binlog Server

选择一个专门保存主库binlog的服务器，必须要有mysqlbinlog命令。我们选择db03。

2.1 修改配置文件
vim etc/mha/app1.cnf
[binlog1]
no_master=1
hostname=10.0.0.53
master_binlog_dir=/data/mysql/binlog

2.2 创建必要的目录
mkdir -p /data/mysql/binlog
chown -R mysql.mysql /data/*
2.3 修改完之后，将主库binlog拉过来(从000001开始拉，之后的binlog会自动按顺序过来拉取主库binlog日志)
cd /data/mysql/binlog     ----->必须进入到自己创建好的目录
mysqlbinlog  -R --host=10.0.0.51 --user=mha --password=mha --raw  --stop-never mysql-bin.000005 &
注意：拉取日志的起点，需要按照目前从库已经获取到的二进制日志为拉点
2.4 重启MHA
masterha_stop --conf=/etc/mha/app1.cnf
nohup masterha_manager --conf=/etc/mha/app1.cnf --remove_dead_master_conf --ignore_last_failover < /dev/null > /var/log/mha/app1/manager.log 2>&1 &

MySQL读写分离--Atlas

一、Atlas介绍

Atlas是由Qihoo 360，Web平台部基础架构团队开发维护的一个基于MySQL协议的数据中间层项目。
它是在mysql-proxy 0.8.2版本的基础上，对其进行了优化，增加了一些新的功能特性。
360内部使用Atlas运行的mysql业务，每天承载的读写请求数达几十亿条。
注意：

  1. Atlas只能安装运行在64位的系统上
  2. Centos 5.X安装 Atlas-XX.el5.x86_64.rpm，Centos 6.X安装Atlas-XX.el6.x86_64.rpm。
  3. 后端mysql版本应大于5.1，建议使用Mysql 5.6以上
下载地址： https://github.com/Qihoo360/Atlas/releases

二、安装配置

2.1 下载安装软件
yum install -y Atlas*

2.2 移动到该目录
[root@db03~]# cd /usr/local/mysql-proxy/conf/

2.3 备份配置文件
mv test.cnf test.cnf.bak

2.4 修改配置文件
cat > test.cnf <<EOF
[mysql-proxy]
admin-username = user
admin-password = pwd
proxy-backend-addresses = 10.0.0.55:3306
proxy-read-only-backend-addresses = 10.0.0.52:3306,10.0.0.53:3306
pwds = repl:3yb5jEku5h4=,mha:O2jBXONX098=
daemon = true
keepalive = true
event-threads = 8
log-level = message
log-path = /usr/local/mysql-proxy/log
sql-log=ON
proxy-address = 0.0.0.0:33060
admin-address = 0.0.0.0:2345
charset=utf8
EOF

2.5 启动atlas
[root@db03~]# /usr/local/mysql-proxy/bin/mysql-proxyd test start
OK: MySQL-Proxy of test is started

2.6 检查服务
[root@db03~]# ps -ef|grep proxy
root       7656   7336  0 18:29 pts/0    00:00:00 grep --color=auto proxy

三、Atlas功能测试

[root@db03~]# mysql -umha -pmha -h 10.0.0.53 -P 33060
测试读操作：
db03 [(none)]>select @@server_id;
+-------------+
| @@server_id |
+-------------+
|          52 |
+-------------+
1 row in set (0.00 sec)
测试写操作：
db03 [(none)]>begin;select @@server_id;commit;
Query OK, 0 rows affected (0.00 sec)

+-------------+
| @@server_id |
+-------------+
|          51 |
+-------------+
1 row in set (0.00 sec)

Query OK, 0 rows affected (0.00 sec)

db03 [(none)]>

四、生产用户要求(Atlas+MHA+VIP+SENDREPORT+BINLOG)

开发人员申请一个应用用户app(select ipdate insert)，密码123456，要通过10网段登录。

1. 在主库中，创建用户
grant select,update,insert on *.* to app@'10.0.0.%' identified by '123456';

2. 在atlas中添加生产用户
/usr/local/mysql-proxy/bin/encrypt 123456  ------制作加密密码

3. 改配置文件
[root@db03/usr/local/mysql-proxy/conf]# vim test.cnf
pwds = repl:3yb5jEku5h4=,mha:O2jBXONX098=,app:/iZxz+0GRoA=
[root@db03/usr/local/mysql-proxy/conf]# /usr/local/mysql-proxy/bin/mysql-proxyd test restart
[root@db03 conf]# mysql -uapp -p123456  -h 10.0.0.53 -P 33060

五、Atlas基本管理

5.1 连接管理接口
[root@db03~]# mysql -uuser -ppwd -h 10.0.0.53 -P2345

5.2 打印帮助
db03 [(none)]>select * from help;
+----------------------------+---------------------------------------------------------+
| command                    | description                                             |
+----------------------------+---------------------------------------------------------+
| SELECT * FROM help         | shows this help                                         |
| SELECT * FROM backends     | lists the backends and their state                      |
| SET OFFLINE $backend_id    | offline backend server, $backend_id is backend_ndx's id |
| SET ONLINE $backend_id     | online backend server, ...                              |
| ADD MASTER $backend        | example: "add master 127.0.0.1:3306", ...               |
| ADD SLAVE $backend         | example: "add slave 127.0.0.1:3306", ...                |
| REMOVE BACKEND $backend_id | example: "remove backend 1", ...                        |
| SELECT * FROM clients      | lists the clients                                       |
| ADD CLIENT $client         | example: "add client 192.168.1.2", ...                  |
| REMOVE CLIENT $client      | example: "remove client 192.168.1.2", ...               |
| SELECT * FROM pwds         | lists the pwds                                          |
| ADD PWD $pwd               | example: "add pwd user:raw_password", ...               |
| ADD ENPWD $pwd             | example: "add enpwd user:encrypted_password", ...       |
| REMOVE PWD $pwd            | example: "remove pwd user", ...                         |
| SAVE CONFIG                | save the backends to config file                        |
| SELECT VERSION             | display the version of Atlas                            |
+----------------------------+---------------------------------------------------------+
16 rows in set (0.00 sec)

db03 [(none)]>

5.3 查询后端所有节点信息
db03 [(none)]>SELECT * FROM backends;
+-------------+----------------+-------+------+
| backend_ndx | address        | state | type |
+-------------+----------------+-------+------+
|           1 | 10.0.0.55:3306 | up    | rw   |
|           2 | 10.0.0.52:3306 | up    | ro   |
|           3 | 10.0.0.53:3306 | up    | ro   |
+-------------+----------------+-------+------+
3 rows in set (0.00 sec)

5.4 动态添加删除节点
db03 [(none)]>REMOVE BACKEND 3;
Empty set (0.00 sec)

db03 [(none)]>SELECT * FROM backends;
+-------------+----------------+-------+------+
| backend_ndx | address        | state | type |
+-------------+----------------+-------+------+
|           1 | 10.0.0.55:3306 | up    | rw   |
|           2 | 10.0.0.52:3306 | up    | ro   |
+-------------+----------------+-------+------+
2 rows in set (0.01 sec)

5.5 动态添加节点
db03 [(none)]>ADD SLAVE 10.0.0.53:3306;
Empty set (0.00 sec)

db03 [(none)]>SELECT * FROM backends;
+-------------+----------------+-------+------+
| backend_ndx | address        | state | type |
+-------------+----------------+-------+------+
|           1 | 10.0.0.55:3306 | up    | rw   |
|           2 | 10.0.0.52:3306 | up    | ro   |
|           3 | 10.0.0.53:3306 | up    | ro   |
+-------------+----------------+-------+------+
3 rows in set (0.00 sec)

5.6 保存配置到配置文件
db03 [(none)]>SAVE CONFIG;

六、关于读写分离建议

MySQL-Pouter   ----->MySQL
ProxySQL       ----->Percona
Maxscale       ----->MariaDB

MySQL MyCAT分布式架构

一、MyCAT基础架构图

二、基础环境准备

2.1 环境清理
[root@db01~]# pkill mysqld
[root@db01~]# rm -rf /data/330*
[root@db01~]# mv /etc/my.cnf /etc/my.cnf.bak 

2.2 初始化
[root@db01~]# mkdir /data/33{07..10}/data -pmysqld --initialize-insecure  --user=mysql --datadir=/data/3307/data --basedir=/application/mysql
mysqld --initialize-insecure  --user=mysql --datadir=/data/3308/data --basedir=/application/mysql
mysqld --initialize-insecure  --user=mysql --datadir=/data/3309/data --basedir=/application/mysql
mysqld --initialize-insecure  --user=mysql --datadir=/data/3310/data --basedir=/application/mysql

2.3 准备配置文件和启动脚本
========db01==============
cat >/data/3307/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3307/data
socket=/data/3307/mysql.sock
port=3307
log-error=/data/3307/mysql.log
log_bin=/data/3307/mysql-bin
binlog_format=row
skip-name-resolve
server-id=7
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF

cat >/data/3308/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3308/data
port=3308
socket=/data/3308/mysql.sock
log-error=/data/3308/mysql.log
log_bin=/data/3308/mysql-bin
binlog_format=row
skip-name-resolve
server-id=8
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF

cat >/data/3309/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3309/data
socket=/data/3309/mysql.sock
port=3309
log-error=/data/3309/mysql.log
log_bin=/data/3309/mysql-bin
binlog_format=row
skip-name-resolve
server-id=9
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF
cat >/data/3310/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3310/data
socket=/data/3310/mysql.sock
port=3310
log-error=/data/3310/mysql.log
log_bin=/data/3310/mysql-bin
binlog_format=row
skip-name-resolve
server-id=10
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF

cat >/etc/systemd/system/mysqld3307.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target
[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3307/my.cnf
LimitNOFILE = 5000
EOF

cat >/etc/systemd/system/mysqld3308.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target
[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3308/my.cnf
LimitNOFILE = 5000
EOF

cat >/etc/systemd/system/mysqld3309.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target
[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3309/my.cnf
LimitNOFILE = 5000
EOF
cat >/etc/systemd/system/mysqld3310.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target

[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3310/my.cnf
LimitNOFILE = 5000
EOF


========db02================================



cat >/data/3307/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3307/data
socket=/data/3307/mysql.sock
port=3307
log-error=/data/3307/mysql.log
log_bin=/data/3307/mysql-bin
binlog_format=row
skip-name-resolve
server-id=17
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF
cat >/data/3308/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3308/data
port=3308
socket=/data/3308/mysql.sock
log-error=/data/3308/mysql.log
log_bin=/data/3308/mysql-bin
binlog_format=row
skip-name-resolve
server-id=18
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF
cat >/data/3309/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3309/data
socket=/data/3309/mysql.sock
port=3309
log-error=/data/3309/mysql.log
log_bin=/data/3309/mysql-bin
binlog_format=row
skip-name-resolve
server-id=19
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF


cat >/data/3310/my.cnf<<EOF
[mysqld]
basedir=/application/mysql
datadir=/data/3310/data
socket=/data/3310/mysql.sock
port=3310
log-error=/data/3310/mysql.log
log_bin=/data/3310/mysql-bin
binlog_format=row
skip-name-resolve
server-id=20
gtid-mode=on
enforce-gtid-consistency=true
log-slave-updates=1
EOF

cat >/etc/systemd/system/mysqld3307.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target
[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3307/my.cnf
LimitNOFILE = 5000
EOF

cat >/etc/systemd/system/mysqld3308.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target
[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3308/my.cnf
LimitNOFILE = 5000
EOF

cat >/etc/systemd/system/mysqld3309.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target
[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3309/my.cnf
LimitNOFILE = 5000
EOF
cat >/etc/systemd/system/mysqld3310.service<<EOF
[Unit]
Description=MySQL Server
Documentation=man:mysqld(8)
Documentation=http://dev.mysql.com/doc/refman/en/using-systemd.html
After=network.target
After=syslog.target
[Install]
WantedBy=multi-user.target
[Service]
User=mysql
Group=mysql
ExecStart=/application/mysql/bin/mysqld --defaults-file=/data/3310/my.cnf
LimitNOFILE = 5000
EOF

2.4 修改权限，启动多实例(db01,db02)
chown -R mysql.mysql /data/*
systemctl start mysqld3307
systemctl start mysqld3308
systemctl start mysqld3309
systemctl start mysqld3310

mysql -S /data/3307/mysql.sock -e "show variables like 'server_id'"
mysql -S /data/3308/mysql.sock -e "show variables like 'server_id'"
mysql -S /data/3309/mysql.sock -e "show variables like 'server_id'"
mysql -S /data/3310/mysql.sock -e "show variables like 'server_id'"

2.5 节点主从规划
箭头指向谁，谁是主库
    10.0.0.51:3307    <----->  10.0.0.52:3307
    10.0.0.51:3309    ------>  10.0.0.51:3307
    10.0.0.52:3309    ------>  10.0.0.52:3307

    10.0.0.52:3308  <----->    10.0.0.51:3308
    10.0.0.52:3310  ----->     10.0.0.52:3308
    10.0.0.51:3310  ----->     10.0.0.51:3308

2.6 分片规划
shard1：
    Master：10.0.0.51:3307
    slave1：10.0.0.51:3309
    Standby Master：10.0.0.52:3307
    slave2：10.0.0.52:3309
shard2：
    Master：10.0.0.52:3308
    slave1：10.0.0.52:3310
    Standby Master：10.0.0.51:3308
    slave2：10.0.0.51:3310

2.7 开始配置
shard1
10.0.0.51:3307 <-----> 10.0.0.52:3307
db02
mysql  -S /data/3307/mysql.sock -e "grant replication slave on *.* to repl@'10.0.0.%' identified by '123';"
mysql  -S /data/3307/mysql.sock -e "grant all  on *.* to root@'10.0.0.%' identified by '123'  with grant option;"
db01
mysql  -S /data/3307/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.52', MASTER_PORT=3307, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3307/mysql.sock -e "start slave;"
mysql  -S /data/3307/mysql.sock -e "show slave status\G"
db02
mysql  -S /data/3307/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3307, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3307/mysql.sock -e "start slave;"
mysql  -S /data/3307/mysql.sock -e "show slave status\G"
10.0.0.51:3309 ------> 10.0.0.51:3307
db01
mysql  -S /data/3309/mysql.sock  -e "CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3307, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3309/mysql.sock  -e "start slave;"
mysql  -S /data/3309/mysql.sock  -e "show slave status\G"
10.0.0.52:3309 ------> 10.0.0.52:3307
db02
mysql  -S /data/3309/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.52', MASTER_PORT=3307, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3309/mysql.sock -e "start slave;"
mysql  -S /data/3309/mysql.sock -e "show slave status\G"
shard2
10.0.0.52:3308 <-----> 10.0.0.51:3308
db01
mysql  -S /data/3308/mysql.sock -e "grant replication slave on *.* to repl@'10.0.0.%' identified by '123';"
mysql  -S /data/3308/mysql.sock -e "grant all  on *.* to root@'10.0.0.%' identified by '123'  with grant option;"
db02
mysql  -S /data/3308/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3308/mysql.sock -e "start slave;"
mysql  -S /data/3308/mysql.sock -e "show slave status\G"
db01
mysql  -S /data/3308/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.52', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3308/mysql.sock -e "start slave;"
mysql  -S /data/3308/mysql.sock -e "show slave status\G"
10.0.0.52:3310 -----> 10.0.0.52:3308
db02
mysql  -S /data/3310/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.52', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3310/mysql.sock -e "start slave;"
mysql  -S /data/3310/mysql.sock -e "show slave status\G"
10.0.0.51:3310 -----> 10.0.0.51:3308
db01
mysql  -S /data/3310/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3310/mysql.sock -e "start slave;"
mysql  -S /data/3310/mysql.sock -e "show slave status\G"

========================
shard2
10.0.0.52:3308 <-----> 10.0.0.51:3308
db01
mysql  -S /data/3308/mysql.sock -e "grant replication slave on *.* to repl@'10.0.0.%' identified by '123';"
mysql  -S /data/3308/mysql.sock -e "grant all  on *.* to root@'10.0.0.%' identified by '123'  with grant option;"
db02
mysql  -S /data/3308/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3308/mysql.sock -e "start slave;"
mysql  -S /data/3308/mysql.sock -e "show slave status\G"
db01
mysql  -S /data/3308/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.52', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3308/mysql.sock -e "start slave;"
mysql  -S /data/3308/mysql.sock -e "show slave status\G"

10.0.0.52:3310 -----> 10.0.0.52:3308
db02
mysql  -S /data/3310/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.52', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3310/mysql.sock -e "start slave;"
mysql  -S /data/3310/mysql.sock -e "show slave status\G"

10.0.0.51:3310 -----> 10.0.0.51:3308
db01
mysql  -S /data/3310/mysql.sock -e "CHANGE MASTER TO MASTER_HOST='10.0.0.51', MASTER_PORT=3308, MASTER_AUTO_POSITION=1, MASTER_USER='repl', MASTER_PASSWORD='123';"
mysql  -S /data/3310/mysql.sock -e "start slave;"
mysql  -S /data/3310/mysql.sock -e "show slave status\G"

2.8 监测主从状态
mysql -S /data/3307/mysql.sock -e "show slave status\G"|grep Yes
mysql -S /data/3308/mysql.sock -e "show slave status\G"|grep Yes
mysql -S /data/3309/mysql.sock -e "show slave status\G"|grep Yes
mysql -S /data/3310/mysql.sock -e "show slave status\G"|grep Yes

2.9 问题处理
注：如果中间出现错误，在每个节点进行执行以下命令，然后从2.7步骤重新开始
mysql -S /data/3307/mysql.sock -e "stop slave; reset slave all;"
mysql -S /data/3308/mysql.sock -e "stop slave; reset slave all;"
mysql -S /data/3309/mysql.sock -e "stop slave; reset slave all;"
mysql -S /data/3310/mysql.sock -e "stop slave; reset slave all;"

三、MyCAT安装

3.1 安装java环境
yum install -y java

3.2 下载
Mycat-server-xxxxx.linux.tar.gz
http://dl.mycat.io/

3.3 解压文件
tar xf Mycat-server-1.6.5-release-20180122220033-linux.tar.gz

3.4 软件目录结构
[root@db01/application/mycat]# ll
总用量 12
drwxr-xr-x 2 root root  190 7月   1 16:08 bin
drwxrwxrwx 2 root root    6 3月   1 2016 catlet
drwxrwxrwx 4 root root 4096 7月   1 20:53 conf
drwxr-xr-x 2 root root 4096 7月   1 16:08 lib
drwxrwxrwx 3 root root   74 7月   1 20:55 logs
drwxr-xr-x 2 root root   25 7月   1 16:19 tmlogs
-rwxrwxrwx 1 root root  219 1月  17 2018 version.txt
[root@db01/application/mycat]# 

3.5 启动和连接
配置环境变量
vim /etc/profile
export PATH=/application/mycat/bin:$PATH
source /etc/profile
启动
mycat start
连接mycat：
mysql -uroot -p123456 -h 127.0.0.1 -P8066

四、配置文件介绍

logs目录:
wrapper.log       ---->mycat启动日志
mycat.log         ---->mycat详细工作日志
conf目录:
schema.xml      
主配置文件（读写分离、高可用、分布式策略定制、节点控制）
server.xml
mycat软件本身相关的配置
rule.xml 
分片规则配置文件,记录分片规则列表、使用方法等

五、应用前环境准备

5.1 用户创建及数据库导入
db01:
mysql -S /data/3307/mysql.sock 
grant all on *.* to root@'10.0.0.%' identified by '123';
source /root/world.sql

mysql -S /data/3308/mysql.sock 
grant all on *.* to root@'10.0.0.%' identified by '123';
source /root/world.sql

5.2 配置文件处理
cd /application/mycat/conf
mv schema.xml schema.xml.bak
vim schema.xml 
<?xml version="1.0"?>  
<!DOCTYPE mycat:schema SYSTEM "schema.dtd">  
<mycat:schema xmlns:mycat="http://io.mycat/">
<schema name="TESTDB" checkSQLschema="false" sqlMaxLimit="100" dataNode="dn1"> 
</schema>  
    <dataNode name="dn1" dataHost="localhost1" database= "wordpress" />  
    <dataHost name="localhost1" maxCon="1000" minCon="10" balance="1"  writeType="0" dbType="mysql"  dbDriver="native" switchType="1"> 
        <heartbeat>select user()</heartbeat>  
    <writeHost host="db1" url="10.0.0.51:3307" user="root" password="123"> 
            <readHost host="db2" url="10.0.0.51:3309" user="root" password="123" /> 
    </writeHost> 
    </dataHost>  
</mycat:schema>

六、配置文件简单介绍

6.1 逻辑库：schema
<schema name="TESTDB" checkSQLschema="false" sqlMaxLimit="100" dataNode="dn1"> 
</schema>  

6.2 数据节点:datanode
<dataNode name="dn1" dataHost="localhost1" database= "world" />  

6.3 数据主机：datahost(w和r)
<dataHost name="localhost1" maxCon="1000" minCon="10" balance="1"  writeType="0" dbType="mysql"  dbDriver="native" switchType="1"> 
        <heartbeat>select user()</heartbeat>  
    <writeHost host="db1" url="10.0.0.51:3307" user="root" password="123"> 
            <readHost host="db2" url="10.0.0.52:3309" user="root" password="123" /> 
    </writeHost> 
    </dataHost>
©著作权归作者所有,转载或内容合作请联系作者
  • 人面猴
    序言：七十年代末，一起剥皮案震惊了整个滨河市，随后出现的几起案子，更是在滨河造成了极大的恐慌，老刑警刘岩，带你破解...
    沈念sama阅读 212,294评论 6赞 493
  • 死咒
    序言：滨河连续发生了三起死亡事件，死亡现场离奇诡异，居然都是意外死亡，警方通过查阅死者的电脑和手机，发现死者居然都...
    沈念sama阅读 90,493评论 3赞 385
  • 救了他两次的神仙让他今天三更去死
    文/潘晓璐 我一进店门，熙熙楼的掌柜王于贵愁眉苦脸地迎上来，“玉大人，你说我怎么就摊上这事。” “怎么了？”我有些...
    开封第一讲书人阅读 157,790评论 0赞 348
  • 道士缉凶录：失踪的卖姜人
    文/不坏的土叔 我叫张陵，是天一观的道长。 经常有香客问我，道长，这世上最难降的妖魔是什么？ 我笑而不...
    开封第一讲书人阅读 56,595评论 1赞 284
  • 港岛之恋（遗憾婚礼）
    正文 为了忘掉前任，我火速办了婚礼，结果婚礼上，老公的妹妹穿的比我还像新娘。我一直安慰自己，他们只是感情好，可当我...
    茶点故事阅读 65,718评论 6赞 386
  • 恶毒庶女顶嫁案：这布局不是一般人想出来的
    文/花漫 我一把揭开白布。 她就那样静静地躺着，像睡着了一般。 火红的嫁衣衬着肌肤如雪。 梳的纹丝不乱的头发上，一...
    开封第一讲书人阅读 49,906评论 1赞 290
  • 城市分裂传说
    那天，我揣着相机与录音，去河边找鬼。 笑死，一个胖子当着我的面吹牛，可吹牛的内容都是我干的。 我是一名探鬼主播，决...
    沈念sama阅读 39,053评论 3赞 410
  • 双鸳鸯连环套：你想象不到人心有多黑
    文/苍兰香墨 我猛地睁开眼，长吁一口气：“原来是场噩梦啊……” “哼！你这毒妇竟也来了？” 一声冷哼从身侧响起，我...
    开封第一讲书人阅读 37,797评论 0赞 268
  • 万荣杀人案实录
    序言：老挝万荣一对情侣失踪，失踪者是张志新（化名）和其女友刘颖，没想到半个月后，有当地人在树林里发现了一具尸体，经...
    沈念sama阅读 44,250评论 1赞 303
  • 护林员之死
    正文 独居荒郊野岭守林人离奇死亡，尸身上长有42处带血的脓包…… 初始之章·张勋 以下内容为张勋视角 年9月15日...
    茶点故事阅读 36,570评论 2赞 327
  • 白月光启示录
    正文 我和宋清朗相恋三年，在试婚纱的时候发现自己被绿了。 大学时的朋友给我发了我未婚夫和他白月光在一起吃饭的照片。...
    茶点故事阅读 38,711评论 1赞 341
  • 活死人
    序言：一个原本活蹦乱跳的男人离奇死亡，死状恐怖，灵堂内的尸体忽然破棺而出，到底是诈尸还是另有隐情，我是刑警宁泽，带...
    沈念sama阅读 34,388评论 4赞 332
  • 日本核电站爆炸内幕
    正文 年R本政府宣布，位于F岛的核电站，受9级特大地震影响，放射性物质发生泄漏。R本人自食恶果不足惜，却给世界环境...
    茶点故事阅读 40,018评论 3赞 316
  • 男人毒药：我在死后第九天来索命
    文/蒙蒙 一、第九天 我趴在偏房一处隐蔽的房顶上张望。 院中可真热闹，春花似锦、人声如沸。这庄子的主人今日做“春日...
    开封第一讲书人阅读 30,796评论 0赞 21
  • 一桩弑父案，背后竟有这般阴谋
    文/苍兰香墨 我抬头看了看天上的太阳。三九已至，却和暖如春，着一层夹袄步出监牢的瞬间，已是汗流浃背。 一阵脚步声响...
    开封第一讲书人阅读 32,023评论 1赞 266
  • 情欲美人皮
    我被黑心中介骗来泰国打工， 没想到刚下飞机就差点儿被人妖公主榨干…… 1. 我叫王不留，地道东北人。 一个月前我还...
    沈念sama阅读 46,461评论 2赞 360
  • 代替公主和亲
    正文 我出身青楼，却偏偏与公主长得像，于是被迫代替她去往敌国和亲。 传闻我的和亲对象是个残疾皇子，可洞房花烛夜当晚...
    茶点故事阅读 43,595评论 2赞 350

推荐阅读更多精彩内容