AQS探究

总所周知,java concurrent包的工具类是构建在AbstractQueuedSynchronizer类上的基础上的,而这个类是Doug Lea大神基于CHL队列实现的同步器。这个强大的同步器是怎样实现的呢?我们来一探究竟。

因为AQS的代码比较难以理解,我们从concurrent包下的并发工具类着手开始研究。从最简单的CountDownLatch开始,首先看它的源码


   public class CountDownLatch {
    /**
     * Synchronization control For CountDownLatch.
     * Uses AQS state to represent count.
     */
    private static final class Sync extends AbstractQueuedSynchronizer {
        private static final long serialVersionUID = 4982264981922014374L;

        Sync(int count) {
            setState(count);
        }

        int getCount() {
            return getState();
        }

        protected int tryAcquireShared(int acquires) {
            return (getState() == 0) ? 1 : -1;
        }

        protected boolean tryReleaseShared(int releases) {
            // Decrement count; signal when transition to zero
            for (;;) {
                int c = getState();
                if (c == 0)
                    return false;
                int nextc = c-1;
                if (compareAndSetState(c, nextc))
                    return nextc == 0;
            }
        }
    }

CountDownlatch类定义了一个Sync类继承自AQS,实现的了AQS的tryAcquireShared和tryReleaseShared方法,share顾名思义是共享锁。首先从await方法入手:


    public void await() throws InterruptedException {
        sync.acquireSharedInterruptibly(1);
    }

await方法调用的AQS的acquireSharedInterruptibly


    public final void acquireSharedInterruptibly(int arg)
            throws InterruptedException {
        if (Thread.interrupted())
            throw new InterruptedException();
        if (tryAcquireShared(arg) < 0)
            doAcquireSharedInterruptibly(arg);
    }

从这个方法看,await方法是可中断的,如果当前线程被中断,则直接向上抛InterruptedException。如果正常执行,则会调用tryAcquireShared方法,这个是在之类中实现的。现在回到CountDownLatch,看tryAcquireShared的实现:


   protected int tryAcquireShared(int acquires) {
            return (getState() == 0) ? 1 : -1;
        }

很简单,如果state为0则返回1,否则,返回-1。state是构造函数里传进来的。我们都知道使用CountDownlatch时传进来的数字表示并发执行的线程数,由此联想state就是持有锁的线程数。从acquireSharedInterruptibly方法可以看到,当前state!=0,即并发任务线程还没执行完时,会进入doAcquireSharedInterruptibly:


private void doAcquireSharedInterruptibly(int arg)
        throws InterruptedException {
        final Node node = addWaiter(Node.SHARED);
        boolean failed = true;
        try {
            for (;;) {
                final Node p = node.predecessor();
                if (p == head) {
                    int r = tryAcquireShared(arg);
                    if (r >= 0) {
                        setHeadAndPropagate(node, r);
                        p.next = null; // help GC
                        failed = false;
                        return;
                    }
                }
                if (shouldParkAfterFailedAcquire(p, node) &&
                    parkAndCheckInterrupt())
                    throw new InterruptedException();
            }
        } finally {
            if (failed)
                cancelAcquire(node);
        }
    }

首先看addWaiter方法


 private Node addWaiter(Node mode) {
        Node node = new Node(Thread.currentThread(), mode);
        // Try the fast path of enq; backup to full enq on failure
        Node pred = tail;
        if (pred != null) {
            node.prev = pred;
            if (compareAndSetTail(pred, node)) {
                pred.next = node;
                return node;
            }
        }
        enq(node);
        return node;
    }

也就是说在pred为null的时候会初始化队列


    private Node enq(final Node node) {
        for (;;) {
            Node t = tail;
            if (t == null) { // Must initialize
                if (compareAndSetHead(new Node()))
                    tail = head;
            } else {
                node.prev = t;
                if (compareAndSetTail(t, node)) {
                    t.next = node;
                    return t;
                }
            }
        }
    }

从上面代码看初始化之后的队列是这样的:

线程队列.jpg

head只是指向一个空节点,这一点对于理解后面的代码很重要,再回到doAcquireSharedInterruptibly,p的前继节点就是head,所以会进入下面的if分支(至于为什么有这个if判断后面再详解),对于CountDownLatch,在并发任务还没完成的时候,tryAcquireShared返回值为-1,所以就不会往下走。直接进入shouldParkAfterFailedAcquire


private static boolean shouldParkAfterFailedAcquire(Node pred, Node node) {
        int ws = pred.waitStatus;
        if (ws == Node.SIGNAL)
            /*
             * This node has already set status asking a release
             * to signal it, so it can safely park.
             */
            return true;
        if (ws > 0) {
            /*
             * Predecessor was cancelled. Skip over predecessors and
             * indicate retry.
             */
            do {
                node.prev = pred = pred.prev;
            } while (pred.waitStatus > 0);
            pred.next = node;
        } else {
            /*
             * waitStatus must be 0 or PROPAGATE.  Indicate that we
             * need a signal, but don't park yet.  Caller will need to
             * retry to make sure it cannot acquire before parking.
             */
            compareAndSetWaitStatus(pred, ws, Node.SIGNAL);
        }
        return false;
    }

pred就是head,初始化之后waitStatus=0,进入else分支,故head的waitStatus被更新为SIGNAL,再回到doAcquireSharedInterruptibly,这个时候如果线程没有被中断,那么会接着循环,再次进入shouldParkAfterFailedAcquire,这个是进入第一个if分支,返回true,那么就是进入parkAndCheckInterrupt,将当前线程阻塞住,这就是CountDownlatch调用await后阻塞住的原因。

从上面的分析可以知道,对于CountDownlatch,在并发任务还没结束的时候,如果另外一个线程B再调用await方法,那么当前线程会放到等待队列的最后面。第一个节点park住的时候,它的waitStatus还是0,所以这次,shouldParkAfterFailedAcquire会把第一个节点的waitStatus设置为SIGNAL,同时下次循环会park住线程B

AQS获取锁的过程已经了解清楚了,下面来看看AQS释放锁的过程。还是从CountDownLatch的countdown()方法入手。countdown()是直接调用AQS的releaseShared


    public final boolean releaseShared(int arg) {
        if (tryReleaseShared(arg)) {
            doReleaseShared();
            return true;
        }
        return false;
    }

从代码看,tryReleaseShared是在子类中实现的:


        protected boolean tryReleaseShared(int releases) {
            // Decrement count; signal when transition to zero
            for (;;) {
                int c = getState();
                if (c == 0)
                    return false;
                int nextc = c-1;
                if (compareAndSetState(c, nextc))
                    return nextc == 0;
            }
        }

从tryReleaseShared方法代码来看,只有等所有并发任务执行完,tryReleaseShared才会返回true,才会执行doReleaseShared


private void doReleaseShared() {
        /*
         * Ensure that a release propagates, even if there are other
         * in-progress acquires/releases.  This proceeds in the usual
         * way of trying to unparkSuccessor of head if it needs
         * signal. But if it does not, status is set to PROPAGATE to
         * ensure that upon release, propagation continues.
         * Additionally, we must loop in case a new node is added
         * while we are doing this. Also, unlike other uses of
         * unparkSuccessor, we need to know if CAS to reset status
         * fails, if so rechecking.
         */
        for (;;) {
            Node h = head;
            if (h != null && h != tail) {
                int ws = h.waitStatus;
                if (ws == Node.SIGNAL) {
                    if (!compareAndSetWaitStatus(h, Node.SIGNAL, 0))
                        continue;            // loop to recheck cases
                    unparkSuccessor(h);
                }
                else if (ws == 0 &&
                         !compareAndSetWaitStatus(h, 0, Node.PROPAGATE))
                    continue;                // loop on failed CAS
            }
            if (h == head)                   // loop if head changed
                break;
        }
    }

如果head节点的waitStatus为SIGNAL,则先把head节点的status设置为0,然后进入unparkSuccessor


private void unparkSuccessor(Node node) {
        /*
         * If status is negative (i.e., possibly needing signal) try
         * to clear in anticipation of signalling.  It is OK if this
         * fails or if status is changed by waiting thread.
         */
        int ws = node.waitStatus;
        if (ws < 0)
            compareAndSetWaitStatus(node, ws, 0);

        /*
         * Thread to unpark is held in successor, which is normally
         * just the next node.  But if cancelled or apparently null,
         * traverse backwards from tail to find the actual
         * non-cancelled successor.
         */
        Node s = node.next;
        if (s == null || s.waitStatus > 0) {
            s = null;
            for (Node t = tail; t != null && t != node; t = t.prev)
                if (t.waitStatus <= 0)
                    s = t;
        }
        if (s != null)
            LockSupport.unpark(s.thread);
    }

在通常情况下,s!=null并且s.waitStatus为SIGNAL,所以head节点的后继节点会被唤醒。就是说每次调用releaseShared只会唤醒等待队列中head节点之后的线程。

分析到这里,试想这个使用CountDownLatch场景,线程A和线程B,都调用await方法等待线程B、线程C完成任务。那么在线程B、线>程C完成任务的时候,主线程调用releaseShared进入doReleaseShared唤醒head节点之后的节点线程。因为原来的线程是在doAcquireSharedInterruptibly里的for循环最后park住,现在仍然回到该处,继续下次循环。这个时候会进入上面提到的if分支,进入setHeadAndPropagate。


    private void setHeadAndPropagate(Node node, long propagate) {
        Node h = head; // Record old head for check below
        setHead(node);
        /*
         * Try to signal next queued node if:
         *   Propagation was indicated by caller,
         *     or was recorded (as h.waitStatus) by a previous operation
         *     (note: this uses sign-check of waitStatus because
         *      PROPAGATE status may transition to SIGNAL.)
         * and
         *   The next node is waiting in shared mode,
         *     or we don't know, because it appears null
         *
         * The conservatism in both of these checks may cause
         * unnecessary wake-ups, but only when there are multiple
         * racing acquires/releases, so most need signals now or soon
         * anyway.
         */
        if (propagate > 0 || h == null || h.waitStatus < 0) {
            Node s = node.next;
            if (s == null || s.isShared())
                doReleaseShared();
        }
    }

从代码来看,setHeadAndPropagate就是把当前当前head节点remove掉,设置当前线程节点为head节点(也就是第二个节点)。同时在共享锁的模式下,会调用doReleaseShared,唤醒当前节点的后继节点,这就是propagate的概念。同理后续节点又会再唤醒它后面的节点,直到整个队列都被唤醒。

至此,已基本了解AQS的工作原理的,为了加深印象,我们来看下面的线程队列的变化过程图。

线程thread1调用acquireSharedInterruptibly之后,线程队列如下图,同时thread1被park住


另外一个线程thead2再次调用acquireSharedInterruptibly之后,线程队列如下图,同时thread2被park住


这个时候,另一个线程触发releaseShared,线程队列如下图,同时thread1被unpark

thread1被unpark之后,会进入setHeadAndPropagate,setHead之后,线程队列如下图


thread1调用doReleaseShared唤醒thread2后,线程队列如下图


thread2 进入setHeadAndPropagate,setHead之后,线程队列如下图


最后编辑于
©著作权归作者所有,转载或内容合作请联系作者
  • 序言:七十年代末,一起剥皮案震惊了整个滨河市,随后出现的几起案子,更是在滨河造成了极大的恐慌,老刑警刘岩,带你破解...
    沈念sama阅读 212,332评论 6 493
  • 序言:滨河连续发生了三起死亡事件,死亡现场离奇诡异,居然都是意外死亡,警方通过查阅死者的电脑和手机,发现死者居然都...
    沈念sama阅读 90,508评论 3 385
  • 文/潘晓璐 我一进店门,熙熙楼的掌柜王于贵愁眉苦脸地迎上来,“玉大人,你说我怎么就摊上这事。” “怎么了?”我有些...
    开封第一讲书人阅读 157,812评论 0 348
  • 文/不坏的土叔 我叫张陵,是天一观的道长。 经常有香客问我,道长,这世上最难降的妖魔是什么? 我笑而不...
    开封第一讲书人阅读 56,607评论 1 284
  • 正文 为了忘掉前任,我火速办了婚礼,结果婚礼上,老公的妹妹穿的比我还像新娘。我一直安慰自己,他们只是感情好,可当我...
    茶点故事阅读 65,728评论 6 386
  • 文/花漫 我一把揭开白布。 她就那样静静地躺着,像睡着了一般。 火红的嫁衣衬着肌肤如雪。 梳的纹丝不乱的头发上,一...
    开封第一讲书人阅读 49,919评论 1 290
  • 那天,我揣着相机与录音,去河边找鬼。 笑死,一个胖子当着我的面吹牛,可吹牛的内容都是我干的。 我是一名探鬼主播,决...
    沈念sama阅读 39,071评论 3 410
  • 文/苍兰香墨 我猛地睁开眼,长吁一口气:“原来是场噩梦啊……” “哼!你这毒妇竟也来了?” 一声冷哼从身侧响起,我...
    开封第一讲书人阅读 37,802评论 0 268
  • 序言:老挝万荣一对情侣失踪,失踪者是张志新(化名)和其女友刘颖,没想到半个月后,有当地人在树林里发现了一具尸体,经...
    沈念sama阅读 44,256评论 1 303
  • 正文 独居荒郊野岭守林人离奇死亡,尸身上长有42处带血的脓包…… 初始之章·张勋 以下内容为张勋视角 年9月15日...
    茶点故事阅读 36,576评论 2 327
  • 正文 我和宋清朗相恋三年,在试婚纱的时候发现自己被绿了。 大学时的朋友给我发了我未婚夫和他白月光在一起吃饭的照片。...
    茶点故事阅读 38,712评论 1 341
  • 序言:一个原本活蹦乱跳的男人离奇死亡,死状恐怖,灵堂内的尸体忽然破棺而出,到底是诈尸还是另有隐情,我是刑警宁泽,带...
    沈念sama阅读 34,389评论 4 332
  • 正文 年R本政府宣布,位于F岛的核电站,受9级特大地震影响,放射性物质发生泄漏。R本人自食恶果不足惜,却给世界环境...
    茶点故事阅读 40,032评论 3 316
  • 文/蒙蒙 一、第九天 我趴在偏房一处隐蔽的房顶上张望。 院中可真热闹,春花似锦、人声如沸。这庄子的主人今日做“春日...
    开封第一讲书人阅读 30,798评论 0 21
  • 文/苍兰香墨 我抬头看了看天上的太阳。三九已至,却和暖如春,着一层夹袄步出监牢的瞬间,已是汗流浃背。 一阵脚步声响...
    开封第一讲书人阅读 32,026评论 1 266
  • 我被黑心中介骗来泰国打工, 没想到刚下飞机就差点儿被人妖公主榨干…… 1. 我叫王不留,地道东北人。 一个月前我还...
    沈念sama阅读 46,473评论 2 360
  • 正文 我出身青楼,却偏偏与公主长得像,于是被迫代替她去往敌国和亲。 传闻我的和亲对象是个残疾皇子,可洞房花烛夜当晚...
    茶点故事阅读 43,606评论 2 350

推荐阅读更多精彩内容