一 CADisplayLink、NSTimer使用注意

• CADisplayLink、NSTimer会对target产生强引用，如果target又对它们产生强引用，那么就会引发循环引用

示例代码如下

• CADisplayLink

@property (strong, nonatomic) CADisplayLink *link;

- (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event {
    // 保证调用频率和屏幕的刷帧频率一致，60FPS
    self.link = [CADisplayLink displayLinkWithTarget:self selector:@selector(linkTest)];
    [self.link addToRunLoop:[NSRunLoop mainRunLoop] forMode:NSDefaultRunLoopMode];
}

- (void)linkTest {
    NSLog(@"%s", __func__);
}

执行几秒后点击退出当前控制器

执行结果如下

1653926-2b14b150ac9547df.png

由打印结果可知，虽然已经控制器已经消失了，但是没有调用其dealloc方法，造成内存泄露.

• NSTimer

@property (strong, nonatomic) NSTimer *timer;

- (void)touchesBegan:(NSSet<UITouch *> *)touches withEvent:(UIEvent *)event {
    self.timer = [NSTimer scheduledTimerWithTimeInterval:1.0 target:self selector:@selector(timerTest) userInfo:nil repeats:YES];
    [[NSRunLoop currentRunLoop] addTimer:self.timer forMode:NSRunLoopCommonModes];
}

- (void)timerTest {
    NSLog(@"%s", __func__);
}

- (void)dealloc {
    NSLog(@"%s", __func__);
    [self.timer invalidate];
}

执行几秒后点击退出当前控制器

执行结果如下

1653926-ecf4809af703c4af.png

由运行结果可知，控制器已经消失了，但是仍然没有调用其dealloc方法，导致内存泄露。

解决方案

• 使用block

__weak typeof(self) weakSelf = self;
self.timer = [NSTimer scheduledTimerWithTimeInterval:1.0 repeats:YES block:^(NSTimer * _Nonnull timer) {
    [weakSelf timerTest];
}];

运行结果

1653926-fa507d3d69b333e9.png

由运行结果可知，控制器退出时，调用了其dealloc方法，不会造成内存泄露。

• 使用代理对象（NSProxy）
• CADisplayLink

Proxy类

// Proxy.h
@interface Proxy : NSObject
+ (instancetype)proxyWithTarget:(id)target;
@property (weak, nonatomic) id target;
@end

// Proxy.m
@implementation Proxy
+ (instancetype)proxyWithTarget:(id)target {
    Proxy *proxy = [[Proxy alloc] init];
    proxy.target = target;
    return proxy;
}

- (id)forwardingTargetForSelector:(SEL)aSelector {
    return self.target;
}
@end

使用CADisplayLink

self.link = [CADisplayLink displayLinkWithTarget:[Proxy proxyWithTarget:self] selector:@selector(linkTest)];
[self.link addToRunLoop:[NSRunLoop mainRunLoop] forMode:NSDefaultRunLoopMode];

运行结果

1653926-244ab58c1b421c70.png

• NSTimer

self.timer = [NSTimer scheduledTimerWithTimeInterval:1.0 target:[Proxy proxyWithTarget:self] selector:@selector(timerTest) userInfo:nil repeats:YES];
[[NSRunLoop currentRunLoop] addTimer:self.timer forMode:NSRunLoopCommonModes];

运行结果

1653926-f64b7d101a1aa77b.png

直接继承NSProxy

// Proxy1.h文件
@interface Proxy1 : NSProxy
+ (instancetype)proxyWithTarget:(id)target;
@property (weak, nonatomic) id target;
@end

// Proxy1.m文件
@implementation Proxy1
+ (instancetype)proxyWithTarget:(id)target {
    // NSProxy对象不需要调用init，因为它本来就没有init方法
    Proxy1 *proxy = [Proxy1 alloc];
    proxy.target = target;
    return proxy;
}

- (NSMethodSignature *)methodSignatureForSelector:(SEL)sel {
    return [self.target methodSignatureForSelector:sel];
}

- (void)forwardInvocation:(NSInvocation *)invocation {
    [invocation invokeWithTarget:self.target];
}
@end

• NSProxy的特点

Proxy *proxy1 = [Proxy proxyWithTarget:self];
Proxy1 *proxy2 = [Proxy1 proxyWithTarget:self];

NSLog(@"%d %d",[proxy1 isKindOfClass:[ViewController class]],[proxy2 isKindOfClass:[ViewController class]]);

运行结果

1653926-1370f466197b108b.png

分析：因为Proxy1是继承自NSProxy,会直接进行消息转发机制，所以执行[proxy2 isKindOfClass:[ViewController class]])，相当于vc执行执行isKindOfClass方法，而isKindOfClass内部也是进行了消息转发，所以返回1。

二 GCD定时器

• NSTimer依赖于RunLoop，如果RunLoop的任务过于繁重，可能会导致NSTimer不准时
• 而GCD的定时器会更加准时

分装GCD定时器类实例代码如下

• CSTimer.h

@interface CSTimer : NSObject

+ (NSString *)execTask:(void(^)(void))task
                 start:(NSTimeInterval)start
              interval:(NSTimeInterval)interval
               repeats:(BOOL)repeats
                 async:(BOOL)async;

+ (NSString *)execTask:(id)target
              selector:(SEL)selector
                 start:(NSTimeInterval)start
              interval:(NSTimeInterval)interval
               repeats:(BOOL)repeats
                 async:(BOOL)async;

+ (void)cancelTask:(NSString *)name;

@end

• CSTimer.m

@implementation CSTimer

// 保存定时器的字典
static NSMutableDictionary *timers_;
// 信号量
dispatch_semaphore_t semaphore_;

// 初始化操作
+ (void)initialize {
    static dispatch_once_t onceToken;
    dispatch_once(&onceToken, ^{
        timers_ = [NSMutableDictionary dictionary];
        semaphore_ = dispatch_semaphore_create(1);
    });
}

+ (NSString *)execTask:(void (^)(void))task start:(NSTimeInterval)start interval:(NSTimeInterval)interval repeats:(BOOL)repeats async:(BOOL)async {
    // 如果认为不存在 开始时间小于0 重复并且时间小于0 则返回空
    if (!task || start < 0 || (interval <= 0 && repeats)) return nil;

    // 队列 - 是主队列还是并发队列
    dispatch_queue_t queue = async ? dispatch_get_global_queue(0, 0) : dispatch_get_main_queue();

    // 创建定时器
    dispatch_source_t timer = dispatch_source_create(DISPATCH_SOURCE_TYPE_TIMER, 0, 0, queue);

    // 设置时间
    dispatch_source_set_timer(timer,
                              dispatch_time(DISPATCH_TIME_NOW, start * NSEC_PER_SEC),
                              interval * NSEC_PER_SEC, 0);

    // 保证线程安全
    dispatch_semaphore_wait(semaphore_, DISPATCH_TIME_FOREVER);
    // 定时器的唯一标识
    NSString *name = [NSString stringWithFormat:@"%zd", timers_.count];
    // 存放到字典中
    timers_[name] = timer;
    dispatch_semaphore_signal(semaphore_);

    // 设置回调
    dispatch_source_set_event_handler(timer, ^{
        task();

        if (!repeats) { // 不重复的任务
            [self cancelTask:name];
        }
    });

    // 启动定时器
    dispatch_resume(timer);

    return name;
}

+ (NSString *)execTask:(id)target selector:(SEL)selector start:(NSTimeInterval)start interval:(NSTimeInterval)interval repeats:(BOOL)repeats async:(BOOL)async {
    if (!target || !selector) return nil;

    return [self execTask:^{
        if ([target respondsToSelector:selector]) {
#pragma clang diagnostic push
#pragma clang diagnostic ignored "-Warc-performSelector-leaks"
            [target performSelector:selector];
#pragma clang diagnostic pop
        }
    } start:start interval:interval repeats:repeats async:async];
}

// 取消定时器操作
+ (void)cancelTask:(NSString *)name {
    if (name.length == 0) return;

    // 线程安全
    dispatch_semaphore_wait(semaphore_, DISPATCH_TIME_FOREVER);

    dispatch_source_t timer = timers_[name];
    if (timer) {
        dispatch_source_cancel(timer);
        [timers_ removeObjectForKey:name];
    }

    dispatch_semaphore_signal(semaphore_);
}

外部调用

// 开始定时器操作
- (void)startTimer {
    // 1.使用block回调
    self.task = [CSTimer execTask:^{
        NSLog(@"111111 - %@", [NSThread currentThread]);
    } start:2.0 interval:1.0 repeats:YES async:YES];

    // 2.使用selector
//    self.task = [CSTimer execTask:self selector:@selector(doTask) start:2.0 interval:1.0 repeats:YES async:YES];
}

// 定时执行任务
- (void)doTask {
    NSLog(@"doTask - %@", [NSThread currentThread]);
}

// 停止定时器
[CSTimer cancelTask:self.task];

本文参考:
路飞_Luck (https://www.jianshu.com/p/07f7b96bb03f)
以及借鉴MJ的教程视频
非常感谢.

项目连接地址 - MemoryManage-CADisplayLink+Timer