最近安装惠普p1106打印机，看着都安装的好好的（自带驱动），但就是打印不了，网上也没有相应教程，我现在技术好很多，也懒得写了，就说个思路大家慢慢研究吧！
1.内置的hp打印机驱动有一个hp-check功能，注意检查依赖关系，把没有安装的4个依赖装上。
2.依赖里面有一个python3-notify2,不要照搬照抄，既然是python3的组件，其实也就是python的组件，装一个python-notify2不就好了，要变通
3.除了依赖还有一个hplip-plugin打印组件也必须要安装，不装就不可以打印哦！
下面是源码，重点部分我已经加粗了!!!：
[franksunk@franksun-tobefilledbyoem ~]$ hp-check
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/franksunk/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.4)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP
supplied tarball (.tar.gz or .run) to determine if the proper dependencies are
installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied
package (.deb, .rpm, etc) or an already built HPLIP supplied tarball has the proper
dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will
check both of the above cases (both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 26-21.0.7 version is not supported. Using 26-20.2 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.10.42-1-MANJARO #1 SMP PREEMPT Thu Jun 3 14:37:11 UTC 2021 GNU/Linux
Host: franksun-tobefilledbyoem
Proc: 5.10.42-1-MANJARO #1 SMP PREEMPT Thu Jun 3 14:37:11 UTC 2021 GNU/Linux
Distribution: 26 21.0.7
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.4
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 26 distro 21.0.7 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.4
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.21.4
html=/usr/share/doc/hplip-3.21.4
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.4
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 06/23/21 22:12:13
version = 3.21.4
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.3 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.54.0 OK -
error: xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 - MISSING 'xsane needs to be installed'
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.32 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.119 OK -
network network -wget OPTIONAL - 1.21.1 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.3 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.3 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.33' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - 1.0.32 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.32 OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9.1 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.5 OK -
error: python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - MISSING 'python3-notify2 needs to be installed' #少依赖python3-notify2（1）error: python3-pyqt4-dbus PyQt 4 DBus - DBus Support for PyQt4 OPTIONAL 4.0 - MISSING 'python3-pyqt4-dbus needs to be installed'
error: python3-pyqt4 PyQt 4- Qt interface for Python (for Qt version 4.x) REQUIRED 4.0 - MISSING 'python3-pyqt4 needs to be installed'
python3-dbus Python DBus - Python bindings for DBus REQUIRED 0.80.0 1.2.16 OK -
python3-xml Python XML libraries REQUIRED - 2.4.1 OK -
python3-devel Python devel - Python development files REQUIRED 2.2 3.9.5 OK -
python3-pil PIL - Python Imaging Library (required for commandline scanning with hp-scan) OPTIONAL - 8.2.0 OK -
python3-reportlab Reportlab - PDF library for Python OPTIONAL 2.0 3.5.67 OK -
--------------
| COMPILEDEP |
--------------
libtool libtool - Library building support services REQUIRED - 2.4.6 OK -
gcc gcc - GNU Project C and C++ Compiler REQUIRED - 11.1.0 OK -
make make - GNU make utility to maintain groups of programs REQUIRED 3.0 4.3 OK -
---------------------
| Python Extentions |
---------------------
cupsext CUPS-Extension REQUIRED - 3.21.4 OK -
hpmudext IO-Extension REQUIRED - 3.21.4 OK -
----------------------
| Scan Configuration |
----------------------
hpaio HPLIP-SANE-Backend REQUIRED - 3.21.4 OK 'hpaio found in /etc/sane.d/dll.conf'
scanext Scan-SANE-Extension REQUIRED - 3.21.4 OK -
------------------------------
| DISCOVERED SCANNER DEVICES |
------------------------------
No Scanner found.
--------------------------
| DISCOVERED USB DEVICES |
--------------------------
No devices found.
---------------------------------
| INSTALLED CUPS PRINTER QUEUES |
---------------------------------
warning: No queues found.
--------------
| PERMISSION |
--------------
-----------
| SUMMARY |
-----------
Missing Required Dependencies
-----------------------------
error: 'python-pyqt4' package is missing/incompatible #少依赖python-pyqt4（2）
error: 'pygtk' package is missing/incompatible #少依赖pygtk（3）
Missing Optional Dependencies
-----------------------------
error: 'xsane' package is missing/incompatible #少依赖xsane（4）
Total Errors: 4
Total Warnings: 0
Done.
[franksunk@franksun-tobefilledbyoem ~]$ yay -S python-pyqt4 #装依赖python-pyqt4（1）
正在解析依赖关系...
正在查找软件包冲突...
软件包 (5) pyqt4-common-4.12.3-5 python-sip-pyqt4-4.19.25-1 qt4-4.8.7-35
sip-6.1.0-1 python-pyqt4-4.12.3-5
全部安装大小： 105.65 MiB
:: 进行安装吗？ [Y/n] Y
(5/5) 正在检查密钥环里的密钥 [###########################] 100%
(5/5) 正在检查软件包完整性 [###########################] 100%
(5/5) 正在加载软件包文件 [###########################] 100%
(5/5) 正在检查文件冲突 [###########################] 100%
(5/5) 正在检查可用存储空间 [###########################] 100%
:: 正在处理软件包的变化...
(1/5) 正在安装 sip [###########################] 100%
(2/5) 正在安装 python-sip-pyqt4 [###########################] 100%
(3/5) 正在安装 qt4 [###########################] 100%
qt4 的可选依赖
postgresql-libs: PostgreSQL driver
mariadb-libs: MariaDB driver
unixodbc: ODBC driver
libfbclient: Firebird/iBase driver
libxinerama: Xinerama support [已安装]
libxcursor: Xcursor support [已安装]
libxfixes: Xfixes support [已安装]
icu: Unicode support [已安装]
sni-qt: StatusNotifierItem (AppIndicators) support
(4/5) 正在安装 pyqt4-common [###########################] 100%
(5/5) 正在安装 python-pyqt4 [###########################] 100%
python-pyqt4 的可选依赖
phonon-qt4: enable audio and video in PyQt applications
:: 正在运行事务后钩子函数...
(1/3) Arming ConditionNeedsUpdate...
(2/3) Updating icon theme caches...
(3/3) Updating the desktop file MIME type cache...
[franksunk@franksun-tobefilledbyoem ~]$ yay -S pygtk #装依赖pygtk（2）
正在解析依赖关系...
正在查找软件包冲突...
软件包 (6) gtk2-2.24.33-2 libglade-2.6.4-8 python2-2.7.18-3 python2-cairo-1.18.2-4
python2-gobject2-2.28.7-6.1 pygtk-2.24.0-14
下载大小： 7.21 MiB
全部安装大小： 122.35 MiB
:: 进行安装吗？ [Y/n] Y
:: 正在获取软件包......
正在初始化下载：https://mirrors.huaweicloud.com/manjaro/stable/extra/x86_64/gtk2-2.24.33-2-x86_64.pkg.tar.zst
File size: 5.87693 兆字节 (6162404 bytes)
正在打开输出文件 /var/cache/pacman/pkg/gtk2-2.24.33-2-x86_64.pkg.tar.zst.part
正在开始下载
连接 0 完成下载
连接 1 完成下载
连接 3 完成下载
连接 5 完成下载
连接 6 完成下载
连接 4 完成下载
[100%] [........................................................] [ 4.9MB/s] [00:00]
已下载 5.87693 兆字节，用时 1 秒。（5031.45 KB/s）
正在初始化下载：https://mirrors.huaweicloud.com/manjaro/stable/extra/x86_64/python2-cairo-1.18.2-4-x86_64.pkg.tar.zst
File size: 60.5703 千字节 (62024 bytes)
正在打开输出文件 /var/cache/pacman/pkg/python2-cairo-1.18.2-4-x86_64.pkg.tar.zst.part
正在开始下载
[100%] [........................................................] [ 263.4KB/s] [00:00]
已下载 60.5703 千字节，用时 0 秒。（263.42 KB/s）
正在初始化下载：https://mirrors.huaweicloud.com/manjaro/stable/community/x86_64/libglade-2.6.4-8-x86_64.pkg.tar.zst
File size: 72.3857 千字节 (74123 bytes)
正在打开输出文件 /var/cache/pacman/pkg/libglade-2.6.4-8-x86_64.pkg.tar.zst.part
正在开始下载
[100%] [........................................................] [ 319.1KB/s] [00:00]
已下载 72.3857 千字节，用时 0 秒。（319.08 KB/s）
正在初始化下载：https://mirrors.huaweicloud.com/manjaro/stable/community/x86_64/python2-gobject2-2.28.7-6.1-x86_64.pkg.tar.zst
File size: 311.786 千字节 (319269 bytes)
正在打开输出文件 /var/cache/pacman/pkg/python2-gobject2-2.28.7-6.1-x86_64.pkg.tar.zst.part
正在开始下载
[100%] [........................................................] [ 1.2MB/s] [00:00]
已下载 311.786 千字节，用时 0 秒。（1178.87 KB/s）
正在初始化下载：https://mirrors.huaweicloud.com/manjaro/stable/community/x86_64/pygtk-2.24.0-14-x86_64.pkg.tar.zst
File size: 924.613 千字节 (946804 bytes)
正在打开输出文件 /var/cache/pacman/pkg/pygtk-2.24.0-14-x86_64.pkg.tar.zst.part
正在开始下载
连接 0 完成下载
连接 1 完成下载
连接 2 完成下载
连接 3 完成下载
连接 5 完成下载
连接 6 完成下载
[100%] [........................................................] [ 2.7MB/s] [00:00]
已下载 924.613 千字节，用时 0 秒。（2809.72 KB/s）
(6/6) 正在检查密钥环里的密钥 [###########################] 100%
(6/6) 正在检查软件包完整性 [###########################] 100%
(6/6) 正在加载软件包文件 [###########################] 100%
(6/6) 正在检查文件冲突 [###########################] 100%
(6/6) 正在检查可用存储空间 [###########################] 100%
:: 正在处理软件包的变化...
(1/6) 正在安装 gtk2 [###########################] 100%
gtk2 的可选依赖
gnome-themes-standard: Default widget theme [已安装]
adwaita-icon-theme: Default icon theme [已安装]
python: gtk-builder-convert [已安装]
(2/6) 正在安装 libglade [###########################] 100%
libglade 的可选依赖
python2: libglade-convert script [等待中]
(3/6) 正在安装 python2 [###########################] 100%
python2 的可选依赖
tk: for IDLE
python2-setuptools
python2-pip
(4/6) 正在安装 python2-cairo [###########################] 100%
(5/6) 正在安装 python2-gobject2 [###########################] 100%
(6/6) 正在安装 pygtk [###########################] 100%
pygtk 的可选依赖
python2-numpy
:: 正在运行事务后钩子函数...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Probing GTK2 input method modules...
[franksunk@franksun-tobefilledbyoem ~]$ yay -S xsane #装依赖xsane（3）
正在解析依赖关系...
正在查找软件包冲突...
软件包 (1) xsane-0.999-5
下载大小： 1.62 MiB
全部安装大小： 4.83 MiB
:: 进行安装吗？ [Y/n] Y
:: 正在获取软件包......
正在初始化下载：https://mirrors.huaweicloud.com/manjaro/stable/extra/x86_64/xsane-0.999-5-x86_64.pkg.tar.zst
File size: 1.62155 兆字节 (1700323 bytes)
正在打开输出文件 /var/cache/pacman/pkg/xsane-0.999-5-x86_64.pkg.tar.zst.part
正在开始下载
连接 0 完成下载
连接 2 完成下载
连接 3 完成下载
连接 4 完成下载
连接 5 完成下载
连接 6 完成下载
连接 7 完成下载
连接 0 完成下载
连接 2 完成下载
连接 3 完成下载
连接 1 完成下载
已下载 1.62155 兆字节，用时 5 秒。（330.22 KB/s）
(1/1) 正在检查密钥环里的密钥 [###########################] 100%
(1/1) 正在检查软件包完整性 [###########################] 100%
(1/1) 正在加载软件包文件 [###########################] 100%
(1/1) 正在检查文件冲突 [###########################] 100%
(1/1) 正在检查可用存储空间 [###########################] 100%
:: 正在处理软件包的变化...
(1/1) 正在安装 xsane [###########################] 100%
NOTE:
If you experience any problems after installing xsane
it may help to remove the setup and preferences files
of xsane:
$ rm -rf ~/.sane/xsane
Xsane only supports creation of pdf files in 8bit colour depth!
xsane 的可选依赖
xsane-gimp: for gimp plugin support
:: 正在运行事务后钩子函数...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Updating the desktop file MIME type cache...
[franksunk@franksun-tobefilledbyoem ~]$ yay -S python-notify2 #装依赖python-notify2 （4）
[sudo] franksunk 的密码：
正在解析依赖关系...
正在查找软件包冲突...
软件包 (1) python-notify2-0.3.1-5
下载大小： 0.02 MiB
全部安装大小： 0.06 MiB
:: 进行安装吗？ [Y/n] Y
:: 正在获取软件包......
正在初始化下载：https://mirrors.huaweicloud.com/manjaro/stable/extra/x86_64/python-notify2-0.3.1-5-any.pkg.tar.zst
File size: 15.4121 千字节 (15782 bytes)
正在打开输出文件 /var/cache/pacman/pkg/python-notify2-0.3.1-5-any.pkg.tar.zst.part
正在开始下载
[100%] [...................................................................................] [ 76.9KB/s] [00:00]
已下载 15.4121 千字节，用时 0 秒。（76.88 KB/s）
(1/1) 正在检查密钥环里的密钥 [######################################] 100%
(1/1) 正在检查软件包完整性 [######################################] 100%
(1/1) 正在加载软件包文件 [######################################] 100%
(1/1) 正在检查文件冲突 [######################################] 100%
(1/1) 正在检查可用存储空间 [######################################] 100%
:: 正在处理软件包的变化...
(1/1) 正在安装 python-notify2 [######################################] 100%
:: 正在运行事务后钩子函数...
(1/1) Arming ConditionNeedsUpdate...
[franksunk@franksun-tobefilledbyoem ~]$ hp-check
/usr/bin/hp-check:685: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if 'getfacl' not in g and '' is not g and 'file' not in g:
Saving output in log file: /home/franksunk/hp-check.log
HP Linux Imaging and Printing System (ver. 3.21.4)
Dependency/Version Check Utility ver. 15.1
Copyright (c) 2001-18 HP Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.
Note: hp-check can be run in three modes:
1. Compile-time check mode (-c or --compile): Use this mode before compiling the HPLIP supplied tarball (.tar.gz
or .run) to determine if the proper dependencies are installed to successfully compile HPLIP.
2. Run-time check mode (-r or --run): Use this mode to determine if a distro supplied package (.deb, .rpm, etc)
or an already built HPLIP supplied tarball has the proper dependencies installed to successfully run.
3. Both compile- and run-time check mode (-b or --both) (Default): This mode will check both of the above cases
(both compile- and run-time dependencies).
Check types:
a. EXTERNALDEP - External Dependencies
b. GENERALDEP - General Dependencies (required both at compile and run time)
c. COMPILEDEP - Compile time Dependencies
d. [All are run-time checks]
PYEXT SCANCONF QUEUES PERMISSION
Status Types:
OK
MISSING - Missing Dependency or Permission or Plug-in
INCOMPAT - Incompatible dependency-version or Plugin-version
warning: 26-21.0.7 version is not supported. Using 26-20.2 versions dependencies to verify and install...
---------------
| SYSTEM INFO |
---------------
Kernel: 5.10.42-1-MANJARO #1 SMP PREEMPT Thu Jun 3 14:37:11 UTC 2021 GNU/Linux
Host: franksun-tobefilledbyoem
Proc: 5.10.42-1-MANJARO #1 SMP PREEMPT Thu Jun 3 14:37:11 UTC 2021 GNU/Linux
Distribution: 26 21.0.7
Bitness: 64 bit
-----------------------
| HPLIP CONFIGURATION |
-----------------------
HPLIP-Version: HPLIP 3.21.4
HPLIP-Home: /usr/share/hplip
warning: HPLIP-Installation: Auto installation is not supported for 26 distro 21.0.7 version
Current contents of '/etc/hp/hplip.conf' file:
# hplip.conf. Generated from hplip.conf.in by configure.
[hplip]
version=3.21.4
[dirs]
home=/usr/share/hplip
run=/var/run
ppd=/usr/share/ppd/HP
ppdbase=/usr/share/ppd
doc=/usr/share/doc/hplip-3.21.4
html=/usr/share/doc/hplip-3.21.4
icon=/usr/share/applications
cupsbackend=/usr/lib/cups/backend
cupsfilter=/usr/lib/cups/filter
drv=/usr/share/cups/drv/hp
bin=/usr/bin
apparmor=/etc/apparmor.d
# Following values are determined at configure time and cannot be changed.
[configure]
network-build=yes
libusb01-build=no
pp-build=yes
gui-build=yes
scanner-build=yes
fax-build=yes
dbus-build=yes
cups11-build=no
doc-build=yes
shadow-build=no
hpijs-install=no
foomatic-drv-install=no
foomatic-ppd-install=no
foomatic-rip-hplip-install=no
hpcups-install=yes
cups-drv-install=yes
cups-ppd-install=no
internal-tag=3.21.4
restricted-build=no
ui-toolkit=qt5
qt3=no
qt4=no
qt5=yes
policy-kit=no
lite-build=no
udev_sysfs_rules=no
hpcups-only-build=no
hpijs-only-build=no
apparmor_build=no
class-driver=no
Current contents of '/var/lib/hp/hplip.state' file:
Plugins are not installed. Could not access file: No such file or directory
Current contents of '~/.hplip/hplip.conf' file:
[installation]
date_time = 06/23/21 23:29:47
version = 3.21.4
<Package-name> <Package-Desc> <Required/Optional> <Min-Version> <Installed-Version> <Status> <Comment>
-------------------------
| External Dependencies |
-------------------------
cups CUPS - Common Unix Printing System REQUIRED 1.1 2.3.3 OK 'CUPS Scheduler is running'
gs GhostScript - PostScript and PDF language interpreter and previewer REQUIRED 7.05 9.54.0 OK -
xsane xsane - Graphical scanner frontend for SANE OPTIONAL 0.9 0.999 OK -
scanimage scanimage - Shell scanning program OPTIONAL 1.0 1.0.32 OK -
dbus DBus - Message bus system REQUIRED - 1.12.20 OK -
policykit PolicyKit - Administrative policy framework OPTIONAL - 0.119 OK -
network network -wget OPTIONAL - 1.21.1 OK -
avahi-utils avahi-utils OPTIONAL - 0.8 OK -
------------------------
| General Dependencies |
------------------------
libjpeg libjpeg - JPEG library REQUIRED - - OK -
cups-devel CUPS devel- Common Unix Printing System development files REQUIRED - 2.3.3 OK -
cups-image CUPS image - CUPS image development files REQUIRED - 2.3.3 OK -
libpthread libpthread - POSIX threads library REQUIRED - b'2.33' OK -
libusb libusb - USB library REQUIRED - 1.0 OK -
sane SANE - Scanning library REQUIRED - 1.0.32 OK -
sane-devel SANE - Scanning library development files REQUIRED - 1.0.32 OK -
libavahi-dev libavahi-dev REQUIRED - - OK -
libnetsnmp-devel libnetsnmp-devel - SNMP networking library development files REQUIRED 5.0.9 5.9.1 OK -
libcrypto libcrypto - OpenSSL cryptographic library REQUIRED - 1.1.1 OK -
python3X Python 2.2 or greater - Python programming language REQUIRED 2.2 3.9.5 OK -
python3-notify2 Python libnotify - Python bindings for the libnotify Desktop notifications OPTIONAL - - OK -
Traceback (most recent call last):
File "/usr/bin/hp-check", line 862, in <module>
num_errors, num_warns = dep.validate(time_flag, is_quiet_mode)
File "/usr/bin/hp-check", line 367, in validate
self.__update_deps_info(supported_distro_vrs, dep,
File "/usr/bin/hp-check", line 210, in __update_deps_info
installed_ver = self.core.version_func[deps_info[6]]()
File "/usr/share/hplip/installer/dcheck.py", line 303, in get_pyQt4_version
from PyQt4 import QtCore
ImportError: cannot import name 'QtCore' from 'PyQt4' (unknown location)
[franksunk@franksun-tobefilledbyoem ~]$ yay -S hplip-plugin #装组件hplip-plugin （5）
[sudo] franksunk 的密码：
正在解析依赖关系...
正在查找软件包冲突...
软件包 (1) hplip-plugin-1:3.21.4-1
下载大小： 1.32 MiB
全部安装大小： 4.36 MiB
:: 进行安装吗？ [Y/n] Y
:: 正在获取软件包......
正在初始化下载：https://mirrors.huaweicloud.com/archlinuxcn/x86_64/hplip-plugin-1:3.21.4-1-x86_64.pkg.tar.zst
File size: 1.31884 兆字节 (1382905 bytes)
正在打开输出文件 /var/cache/pacman/pkg/hplip-plugin-1:3.21.4-1-x86_64.pkg.tar.zst.part
正在开始下载
[100%] [...................................................................................] [ 4.0MB/s] [00:00]
已下载 1.31884 兆字节，用时 0 秒。（4055.67 KB/s）
(1/1) 正在检查密钥环里的密钥 [######################################] 100%
(1/1) 正在检查软件包完整性 [######################################] 100%
(1/1) 正在加载软件包文件 [######################################] 100%
(1/1) 正在检查文件冲突 [######################################] 100%
(1/1) 正在检查可用存储空间 [######################################] 100%
:: 正在处理软件包的变化...
(1/1) 正在安装 hplip-plugin [######################################] 100%
:: 正在运行事务后钩子函数...
(1/1) Arming ConditionNeedsUpdate...
[franksunk@franksun-tobefilledbyoem ~]$ hp-check
error: python3-notify2 Python libnotify - Python bindings for the
libnotify Desktop notifications OPTIONAL - -
MISSING 'python3-notify2 needs to be installed' #少依赖python3-notify2
error: 'python-pyqt4' package is missing/incompatible #少依赖python-pyqt4
error: 'pygtk' package is missing/incompatible #少依赖pygtk
error: 'xsane' package is missing/incompatible #少依赖xsane
[franksunk@franksun-tobefilledbyoem ~]$ yay -S python-pyqt4 #装依赖python-pyqt4
[franksunk@franksun-tobefilledbyoem ~]$ yay -S xsane #装依赖xsane
[franksunk@franksun-tobefilledbyoem ~]$ yay -S pygtk #装依赖pygtk
[franksunk@franksun-tobefilledbyoem ~]$ yay -S python-notify2 #装依赖python3-notify2
[franksunk@franksun-tobefilledbyoem ~]$ yay -S hplip-plugin #装组件hplip-plugin
