FFmpge有几个最重要的结构体比如：
AVFrame，
AVFormatContext，
AVCodecContext，
AVIOContext，
AVCodec，
AVStream，
AVPacket
包含了解协议，解封装，解码操作等功能。
AVFrame
AVFrame结构体一般用于存储原始数据（即非压缩数据，例如对视频来说是YUV，RGB，对音频来说是PCM），此外还包含了一些相关的信息。比如说，解码的时候存储了宏块类型表，QP表，运动矢量表等数据。编码的时候也存储了相关的数据。因此在使用FFMPEG进行码流分析的时候，AVFrame是一个很重要的结构体。
下面是源码：
/**
* This structure describes decoded (raw) audio or video data.
*
* AVFrame must be allocated using av_frame_alloc(). Note that this only
* allocates the AVFrame itself, the buffers for the data must be managed
* through other means (see below).
* AVFrame must be freed with av_frame_free().
*
* AVFrame is typically allocated once and then reused multiple times to hold
* different data (e.g. a single AVFrame to hold frames received from a
* decoder). In such a case, av_frame_unref() will free any references held by
* the frame and reset it to its original clean state before it
* is reused again.
*
* The data described by an AVFrame is usually reference counted through the
* AVBuffer API. The underlying buffer references are stored in AVFrame.buf /
* AVFrame.extended_buf. An AVFrame is considered to be reference counted if at
* least one reference is set, i.e. if AVFrame.buf[0] != NULL. In such a case,
* every single data plane must be contained in one of the buffers in
* AVFrame.buf or AVFrame.extended_buf.
* There may be a single buffer for all the data, or one separate buffer for
* each plane, or anything in between.
*
* sizeof(AVFrame) is not a part of the public ABI, so new fields may be added
* to the end with a minor bump.
* Similarly fields that are marked as to be only accessed by
* av_opt_ptr() can be reordered. This allows 2 forks to add fields
* without breaking compatibility with each other.
*
* Fields can be accessed through AVOptions, the name string used, matches the
* C structure field name for fields accessable through AVOptions. The AVClass
* for AVFrame can be obtained from avcodec_get_frame_class()
*/
typedef struct AVFrame {
#define AV_NUM_DATA_POINTERS 8
/**
* pointer to the picture/channel planes.
* This might be different from the first allocated byte
*
* Some decoders access areas outside 0,0 - width,height, please
* see avcodec_align_dimensions2(). Some filters and swscale can read
* up to 16 bytes beyond the planes, if these filters are to be used,
* then 16 extra bytes must be allocated.
*
* NOTE: Except for hwaccel formats, pointers not needed by the format
* MUST be set to NULL.
*/
uint8_t *data[AV_NUM_DATA_POINTERS];//解码后原始数据（对视频来说是YUV，RGB，对音频来说是PCM）
/**
* For video, size in bytes of each picture line.
* For audio, size in bytes of each plane.
*
* For audio, only linesize[0] may be set. For planar audio, each channel
* plane must be the same size.
*
* For video the linesizes should be multiples of the CPUs alignment
* preference, this is 16 or 32 for modern desktop CPUs.
* Some code requires such alignment other code can be slower without
* correct alignment, for yet other it makes no difference.
*
* @note The linesize may be larger than the size of usable data -- there
* may be extra padding present for performance reasons.
*/
int linesize[AV_NUM_DATA_POINTERS];//data中“一行”数据的大小。注意：未必等于图像的宽，一般大于图像的宽。
/**
* pointers to the data planes/channels.
*
* For video, this should simply point to data[].
*
* For planar audio, each channel has a separate data pointer, and
* linesize[0] contains the size of each channel buffer.
* For packed audio, there is just one data pointer, and linesize[0]
* contains the total size of the buffer for all channels.
*
* Note: Both data and extended_data should always be set in a valid frame,
* but for planar audio with more channels that can fit in data,
* extended_data must be used in order to access all channels.
*/
uint8_t **extended_data;
/**
* width and height of the video frame
*/
int width, height;//视频帧宽和高（1920x1080,1280x720...）
/**
* number of audio samples (per channel) described by this frame
*/
int nb_samples;//音频的一个AVFrame中可能包含多个音频帧，在此标记包含了几个
/**
* format of the frame, -1 if unknown or unset
* Values correspond to enum AVPixelFormat for video frames,
* enum AVSampleFormat for audio)
*/
int format;//解码后原始数据类型（YUV420，YUV422，RGB24...）
/**
* 1 -> keyframe, 0-> not
*/
int key_frame;//是否是关键帧
/**
* Picture type of the frame.
*/
enum AVPictureType pict_type;//帧类型（I,B,P...）
/**
* Sample aspect ratio for the video frame, 0/1 if unknown/unspecified.
*/
AVRational sample_aspect_ratio;//宽高比（16:9，4:3...）
/**
* Presentation timestamp in time_base units (time when frame should be shown to user).
*/
int64_t pts;//显示时间戳
/**
* PTS copied from the AVPacket that was decoded to produce this frame.
*/
int64_t pkt_pts;
/**
* DTS copied from the AVPacket that triggered returning this frame. (if frame threading isn't used)
* This is also the Presentation time of this AVFrame calculated from
* only AVPacket.dts values without pts values.
*/
int64_t pkt_dts;
/**
* picture number in bitstream order
*/
int coded_picture_number;//编码帧序号
/**
* picture number in display order
*/
int display_picture_number;//显示帧序号
/**
* quality (between 1 (good) and FF_LAMBDA_MAX (bad))
*/
int quality;
/**
* for some private data of the user
*/
void *opaque;
#if FF_API_ERROR_FRAME
/**
* @deprecated unused
*/
attribute_deprecated
uint64_t error[AV_NUM_DATA_POINTERS];
#endif
/**
* When decoding, this signals how much the picture must be delayed.
* extra_delay = repeat_pict / (2*fps)
*/
int repeat_pict;
/**
* The content of the picture is interlaced.
*/
int interlaced_frame;
/**
* If the content is interlaced, is top field displayed first.
*/
int top_field_first;
/**
* Tell user application that palette has changed from previous frame.
*/
int palette_has_changed;
/**
* reordered opaque 64 bits (generally an integer or a double precision float
* PTS but can be anything).
* The user sets AVCodecContext.reordered_opaque to represent the input at
* that time,
* the decoder reorders values as needed and sets AVFrame.reordered_opaque
* to exactly one of the values provided by the user through AVCodecContext.reordered_opaque
* @deprecated in favor of pkt_pts
*/
int64_t reordered_opaque;
/**
* Sample rate of the audio data.
*/
int sample_rate;
/**
* Channel layout of the audio data.
*/
uint64_t channel_layout;
/**
* AVBuffer references backing the data for this frame. If all elements of
* this array are NULL, then this frame is not reference counted. This array
* must be filled contiguously -- if buf[i] is non-NULL then buf[j] must
* also be non-NULL for all j < i.
*
* There may be at most one AVBuffer per data plane, so for video this array
* always contains all the references. For planar audio with more than
* AV_NUM_DATA_POINTERS channels, there may be more buffers than can fit in
* this array. Then the extra AVBufferRef pointers are stored in the
* extended_buf array.
*/
AVBufferRef *buf[AV_NUM_DATA_POINTERS];
/**
* For planar audio which requires more than AV_NUM_DATA_POINTERS
* AVBufferRef pointers, this array will hold all the references which
* cannot fit into AVFrame.buf.
*
* Note that this is different from AVFrame.extended_data, which always
* contains all the pointers. This array only contains the extra pointers,
* which cannot fit into AVFrame.buf.
*
* This array is always allocated using av_malloc() by whoever constructs
* the frame. It is freed in av_frame_unref().
*/
AVBufferRef **extended_buf;
/**
* Number of elements in extended_buf.
*/
int nb_extended_buf;
AVFrameSideData **side_data;
int nb_side_data;
/**
* @defgroup lavu_frame_flags AV_FRAME_FLAGS
* Flags describing additional frame properties.
*
* @{
*/
/**
* The frame data may be corrupted, e.g. due to decoding errors.
*/
#define AV_FRAME_FLAG_CORRUPT (1 << 0)
/**
* @}
*/
/**
* Frame flags, a combination of @ref lavu_frame_flags
*/
int flags;
/**
* MPEG vs JPEG YUV range.
* It must be accessed using av_frame_get_color_range() and
* av_frame_set_color_range().
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorRange color_range;
enum AVColorPrimaries color_primaries;
enum AVColorTransferCharacteristic color_trc;
/**
* YUV colorspace type.
* It must be accessed using av_frame_get_colorspace() and
* av_frame_set_colorspace().
* - encoding: Set by user
* - decoding: Set by libavcodec
*/
enum AVColorSpace colorspace;
enum AVChromaLocation chroma_location;
/**
* frame timestamp estimated using various heuristics, in stream time base
* Code outside libavutil should access this field using:
* av_frame_get_best_effort_timestamp(frame)
* - encoding: unused
* - decoding: set by libavcodec, read by user.
*/
int64_t best_effort_timestamp;
/**
* reordered pos from the last AVPacket that has been input into the decoder
* Code outside libavutil should access this field using:
* av_frame_get_pkt_pos(frame)
* - encoding: unused
* - decoding: Read by user.
*/
int64_t pkt_pos;
/**
* duration of the corresponding packet, expressed in
* AVStream->time_base units, 0 if unknown.
* Code outside libavutil should access this field using:
* av_frame_get_pkt_duration(frame)
* - encoding: unused
* - decoding: Read by user.
*/
int64_t pkt_duration;
/**
* metadata.
* Code outside libavutil should access this field using:
* av_frame_get_metadata(frame)
* - encoding: Set by user.
* - decoding: Set by libavcodec.
*/
AVDictionary *metadata;
/**
* decode error flags of the frame, set to a combination of
* FF_DECODE_ERROR_xxx flags if the decoder produced a frame, but there
* were errors during the decoding.
* Code outside libavutil should access this field using:
* av_frame_get_decode_error_flags(frame)
* - encoding: unused
* - decoding: set by libavcodec, read by user.
*/
int decode_error_flags;
#define FF_DECODE_ERROR_INVALID_BITSTREAM 1
#define FF_DECODE_ERROR_MISSING_REFERENCE 2
/**
* number of audio channels, only used for audio.
* Code outside libavutil should access this field using:
* av_frame_get_channels(frame)
* - encoding: unused
* - decoding: Read by user.
*/
int channels;
/**
* size of the corresponding packet containing the compressed
* frame. It must be accessed using av_frame_get_pkt_size() and
* av_frame_set_pkt_size().
* It is set to a negative value if unknown.
* - encoding: unused
* - decoding: set by libavcodec, read by user.
*/
int pkt_size;
#if FF_API_FRAME_QP
/**
* QP table
* Not to be accessed directly from outside libavutil
*/
attribute_deprecated
int8_t *qscale_table;//QP表
/**
* QP store stride
* Not to be accessed directly from outside libavutil
*/
attribute_deprecated
int qstride;
attribute_deprecated
int qscale_type;
/**
* Not to be accessed directly from outside libavutil
*/
AVBufferRef *qp_table_buf;
#endif
/**
* For hwaccel-format frames, this should be a reference to the
* AVHWFramesContext describing the frame.
*/
AVBufferRef *hw_frames_ctx;
} AVFrame;
在这里重点分析一下几个需要一定的理解的变量：
- data[]
对于packed格式的数据（例如RGB24），会存到data[0]里面。
对于planar格式的数据（例如YUV420P），则会分开成data[0]，data[1]，data[2]...（YUV420P中data[0]存Y，data[1]存U，data[2]存V）
2.pict_type
结构体包含以下类型：
/**
* @}
* @}
* @defgroup lavu_picture Image related
*
* AVPicture types, pixel formats and basic image planes manipulation.
*
* @{
*/
enum AVPictureType {
AV_PICTURE_TYPE_NONE = 0, ///< Undefined
AV_PICTURE_TYPE_I, ///< Intra
AV_PICTURE_TYPE_P, ///< Predicted
AV_PICTURE_TYPE_B, ///< Bi-dir predicted
AV_PICTURE_TYPE_S, ///< S(GMC)-VOP MPEG-4
AV_PICTURE_TYPE_SI, ///< Switching Intra
AV_PICTURE_TYPE_SP, ///< Switching Predicted
AV_PICTURE_TYPE_BI, ///< BI type
};
- sample_aspect_ratio
宽高比是一个分数，FFMPEG中用AVRational表达分数：
/**
* rational number numerator/denominator
*/
typedef struct AVRational{
int num; ///< numerator
int den; ///< denominator
} AVRational;
- qscale_table
QP表指向一块内存，里面存储的是每个宏块的QP值。宏块的标号是从左往右，一行一行的来的。每个宏块对应1个QP。
qscale_table[0]就是第1行第1列宏块的QP值；qscale_table[1]就是第1行第2列宏块的QP值；qscale_table[2]就是第1行第3列宏块的QP值。以此类推...
宏块的个数用下式计算：
注：宏块大小是16x16的。
每行宏块数：
int mb_stride = pCodecCtx->width/16+1
宏块的总数：
int mb_sum = ((pCodecCtx->height+15)>>4)*(pCodecCtx->width/16+1)
- motion_subsample_log2
1个运动矢量所能代表的画面大小（用宽或者高表示，单位是像素），注意，这里取了log2。
代码注释中给出以下数据：
4->16x16, 3->8x8, 2-> 4x4, 1-> 2x2
即1个运动矢量代表16x16的画面的时候，该值取4；1个运动矢量代表8x8的画面的时候，该值取3...以此类推
