hda-verb参数详表
hda-verb的由来
hda-verb是linux下面的alsa-project的一条命令，它的作用是发送HD-audio命令。
命令格式：
- linux:
% hda-verb /dev/snd/hwC0D0 0x12 0x701 2
- Mac:
$ hda-verb 0x12 0x701 2
输入命令：
hda-verb
输出信息：
hda-verb for CodecCommander (based on alsa-tools hda-verb)
usage: hda-verb [option] hwdep-device nid verb param
-l List known verbs and parameters
-L List known verbs and parameters (one per line)
| 参数 | 数值 |
|---|---|
| GET_STREAM_FORMAT | 0x0a00 |
| GET_AMP_GAIN_MUTE | 0x0b00 |
| GET_PROC_COEF | 0x0c00 |
| GET_COEF_INDEX | 0x0d00 |
| PARAMETERS | 0x0f00 |
| GET_CONNECT_SEL | 0x0f01 |
| GET_CONNECT_LIST | 0x0f02 |
| GET_PROC_STATE | 0x0f03 |
| GET_SDI_SELECT | 0x0f04 |
| GET_POWER_STATE | 0x0f05 |
| GET_CONV | 0x0f06 |
| GET_PIN_WIDGET_CONTROL | 0x0f07 |
| GET_UNSOLICITED_RESPONSE | 0x0f08 |
| GET_PIN_SENSE | 0x0f09 |
| GET_BEEP_CONTROL | 0x0f0a |
| GET_EAPD_BTLENABLE | 0x0f0c |
| GET_DIGI_CONVERT_1 | 0x0f0d |
| GET_DIGI_CONVERT_2 | 0x0f0e |
| GET_VOLUME_KNOB_CONTROL | 0x0f0f |
| GET_GPIO_DATA | 0x0f15 |
| GET_GPIO_MASK | 0x0f16 |
| GET_GPIO_DIRECTION | 0x0f17 |
| GET_GPIO_WAKE_MASK | 0x0f18 |
| GET_GPIO_UNSOLICITED_RSP_MASK | 0x0f19 |
| GET_GPIO_STICKY_MASK | 0x0f1a |
| GET_CONFIG_DEFAULT | 0x0f1c |
| GET_SUBSYSTEM_ID | 0x0f20 |
| SET_STREAM_FORMAT | 0x200 |
| SET_AMP_GAIN_MUTE | 0x300 |
| SET_PROC_COEF | 0x400 |
| SET_COEF_INDEX | 0x500 |
| SET_CONNECT_SEL | 0x701 |
| SET_PROC_STATE | 0x703 |
| SET_SDI_SELECT | 0x704 |
| SET_POWER_STATE | 0x705 |
| SET_CHANNEL_STREAMID | 0x706 |
| SET_PIN_WIDGET_CONTROL | 0x707 |
| SET_UNSOLICITED_ENABLE | 0x708 |
| SET_PIN_SENSE | 0x709 |
| SET_BEEP_CONTROL | 0x70a |
| SET_EAPD_BTLENABLE | 0x70c |
| SET_DIGI_CONVERT_1 | 0x70d |
| SET_DIGI_CONVERT_2 | 0x70e |
| SET_VOLUME_KNOB_CONTROL | 0x70f |
| SET_GPIO_DATA | 0x715 |
| SET_GPIO_MASK | 0x716 |
| SET_GPIO_DIRECTION | 0x717 |
| SET_GPIO_WAKE_MASK | 0x718 |
| SET_GPIO_UNSOLICITED_RSP_MASK | 0x719 |
| SET_GPIO_STICKY_MASK | 0x71a |
| SET_CONFIG_DEFAULT_BYTES_0 | 0x71c |
| SET_CONFIG_DEFAULT_BYTES_1 | 0x71d |
| SET_CONFIG_DEFAULT_BYTES_2 | 0x71e |
| SET_CONFIG_DEFAULT_BYTES_3 | 0x71f |
| SET_CODEC_RESET | 0x7ff |
已知参数：
| 参数 | 数值 |
|---|---|
| VENDOR_ID | 0x00 |
| SUBSYSTEM_ID | 0x01 |
| REV_ID | 0x02 |
| NODE_COUNT | 0x04 |
| FUNCTION_TYPE | 0x05 |
| AUDIO_FG_CAP | 0x08 |
| AUDIO_WIDGET_CAP | 0x09 |
| PCM | 0x0a |
| STREAM | 0x0b |
| PIN_CAP | 0x0c |
| AMP_IN_CAP | 0x0d |
| CONNLIST_LEN | 0x0e |
| POWER_STATE | 0x0f |
| PROC_CAP | 0x10 |
| GPIO_CAP | 0x11 |
| AMP_OUT_CAP | 0x12 |
| VOL_KNB_CAP | 0x13 |
例子：
设置节点0x19参数为SET_PIN_WIDGET_CONTROL，值为0x24
$ hda-verb 0x19 SET_PIN_WIDGET_CONTROL 0x24
nid = 0x19, verb = 0x707, param = 0x24
command 0x01970724 --> result = 0x00000000
也可以写成：
$ hda-verb 0x19 0x707 0x24
nid = 0x19, verb = 0x707, param = 0x24
command 0x01970724 --> result = 0x00000000
CodecCommander经常使用的命令：
$ hda-verb 0x19 SET_PIN_WIDGET_CONTROL 0x25
$ hda-verb 0x21 SET_UNSOLICITED_ENABLE 0x83
备注：
字符串不区分大小写
此外，它不一定是完整的字符串，但只能是唯一的
例如par和PARAMETER的参数是相同的
set_a就足以代替SET_AMP_GAIN_MUTE
QQ群:
331686786 一起黑苹果
