android10 （Q） go版本刷GSI时候，提示如下错误：
$fastboot flash system system.img
Invalid sparse file format at header magic
Resizing 'system' FAILED (remote: 'Not enough space to resize partition')
fastboot: error: Command failed
从提示的错误可以看出是空间不足,需要调整分区。
Android Q 开始有了super分区，想要解决以上的问题，需要增加super分区的大小，增大分区后重新刷GSI，结果如下：
$fastboot flash system system.img
Invalid sparse file format at header magic
Resizing 'system' OKAY [ 0.007s]
Sending sparse 'system' 1/4 (261900 KB) OKAY [ 23.725s]
Writing 'system' OKAY [ 4.112s]
Sending sparse 'system' 2/4 (261828 KB) OKAY [ 23.732s]
Writing 'system' OKAY [ 4.986s]
Sending sparse 'system' 3/4 (262032 KB) OKAY [ 23.334s]
Writing 'system' OKAY [ 5.008s]
Sending sparse 'system' 4/4 (49388 KB) OKAY [ 4.487s]
Writing 'system' OKAY [ 2.496s]
Finished. Total time: 100.740s
虽然可以刷GSI并正常开机，但是仍有提示Invalid sparse file format at header magic?
这是由于fastboot支持的最大download size小于system.img的大小，需要分批下载来完成，
所以fastboot会将system.img转成sparse file，出现该提示，目前没有发现实质性的影响。
可以通过 -S 来隐藏该提示
fastboot flash -S 800M system system.img
-S 的参数要大于system.img的大小即可
对于空间不足，还看到了另外一种方法，可以参考下：
Use the following command to delete the product partition and free up space for the system
partition. This provides extra space to flash the GSI:
$ fastboot delete-logical-partition product_a
The postfix “_a” should match the slot id of the system partition, such as “system_a” in this
example.
