IC693MDL740

12/24 Volt DC Positive Logic Output - 0.5 Amp, 16 Point

The 12/24 volt DC Positive Logic 0.5 Amp Output module for the Series 90-30 ProgrammableLogic Controller provides 16 output points in two groups of eight with a common power outputterminal for each group. This output module is designed to have positive logic characteristicsin that it sources current to the loads from the user common or positive power bus. The outputdevice is connected between the negative power bus and the module output. The outputcharacteristics are compatible with a wide range of user-supplied load devices, such as: motorstarters, solenoids, and indicators. Power to operate the field devices must be supplied by theuser.LED indicators which provide the ON/OFF status of each point are located at the top of themodule. This LED block has two horizontal rows with eight green LEDs in each row with thetop row labeled A1 through 8 (points 1 through 8) and the bottom row labeled B1 through 8(points 9 through 16). An insert goes between the inside and outside surface of the hinged door.The surface towards the inside of the module (when the hinged door is closed) has circuitwiring information, and circuit identification information can be recorded on the outsidesurface. The outside left edge of the insert is color-coded blue to indicate a low-voltagemodule. There are no fuses on this module.This module can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLCsystem.

90-30系列可编程逻辑控制器的12/24伏直流正逻辑0.5安培输出模块提供两组8个16个输出点，每组有一个公共电源输出端子。该输出模块被设计为具有正逻辑特性，因为它从用户公共或正电源总线向负载提供电流。输出装置连接在负极电源总线和模块输出之间。输出特性与各种用户提供的负载设备兼容，如：电机起动器、螺线管和指示器。操作现场设备的电源必须由用户提供。提供每个点的ON/OFF状态的LED指示灯位于模块的顶部。该LED块有两个水平行，每行有八个绿色LED，顶行标记为A1至8（点1至8），底行标记为B1至8（点9至16）。铰链门的内外表面之间有一个插件。模块内部的表面（铰链门关闭时）有电路布线信息，电路识别信息可以记录在外表面上。插入件的左外边缘为蓝色，表示模块电压低。此模块上没有保险丝。该模块可以安装在90-30系列PLC系统中5或10槽底板的任何I/O槽中。