1、节点1配置
[root@keepalive21 ~] vim /etc/hosts#设置解析
192.168.1.21 keepalive21#主节点
192.168.1.22 keepalive22#备节点
[root@keepalive21 ~] ip link set multicast on dev ens33#开启多播
[root@keepalive21 ~]# yum -y install httpd ipvsadm keepalived
[root@keepalive21 ~]# echo "sorry server 1" > /var/www/html/index.html #设置主页内容
[root@keepalive21 ~]# systemctl start httpd#启动httpd
[root@keepalive21 ~]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {#全局配置
notification_email {#邮件通知地址 ，这里是本机收件地址
root@localhost
}
notification_email_from keepalived@localhost #发件地址
smtp_server 127.0.0.1 #邮件服务地址，端口是25
smtp_connect_timeout 30 #连接邮件服务器超时时间30秒
router_id keepalive21 #可以使用主机名
vrrp_mcast_group4 224.1.101.33 #设置多播地址，其他主机也一样
}
vrrp_instance VI_1 { #定义一个虚拟路由器，第一个
state MASTER #当前状态，主的
interface ens33 #当前的vrp应用，绑定到那个网卡设备上
virtual_router_id 33#这个虚拟ip，与其他主机要保持一至
priority 100 #优先级，高于其他主机
advert_int 1
authentication {
auth_type PASS #密码认证
auth_pass a1b2c3d4 #密码为8位,不能用默认的密码
}
virtual_ipaddress {#虚拟ip地址
192.168.1.99/24 dev ens33
}
}
vrrp_instance VI_2{ #定义一个虚拟路由器，第二个
state BACKUP #当前状态，从的
interface ens33 #当前的vrp应用，绑定到那个网卡设备上
virtual_router_id 34#这个虚拟ip，与其他主机要保持一至
priority 96 #优先级，低于master主机
advert_int 1
authentication {
auth_type PASS #密码认证
auth_pass a6b7c8d9 #密码为8位,不能用默认的密码，这里修改一下
}
virtual_ipaddress {#虚拟ip地址
192.168.1.99/24 dev ens33
}
}
virtual_server 192.168.1.99 80 {
delay_loop 1
lb_algo wrr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80#故障页所在地址，本机所以要启动http
real_server 192.168.1.11 80 {
weight 1 #权重
HTTP_GET {
url {
path /index.html
status_code 200
}
nb_get_retry 3
delay_before_retry 2
connect_timeout 3
}
}
}
[root@keepalive21 ~]# systemctl start keepalived#启动keepalived
[root@keepalive21 ~]# ipvsadm -ln #查询ipvadm状态
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.1.99:80 wrr
-> 192.168.1.11:80 Route 1 0 0
-> 192.168.1.12:80 Route 1 0 0
1、节点2配置
[root@keepalive21 ~] vim /etc/hosts#设置解析
192.168.1.21 keepalive21#主节点
192.168.1.22 keepalive22#备节点
[root@keepalive21 ~] ip link set multicast on dev ens33#开启多播
[root@keepalive22 ~]# yum -y install httpd ipvsadm keepalived
[root@keepalive22 ~]# echo "sorry server 2" > /var/www/html/index.html #设置主页内容
[root@keepalive22 ~]# systemctl start httpd#启动httpd
[root@keepalive22 ~]# vim /etc/keepalived/keepalived.conf
! Configuration File for keepalived
global_defs {#全局配置
notification_email {#邮件通知地址 ，这里是本机收件地址
root@localhost
}
notification_email_from keepalived@localhost #发件地址
smtp_server 127.0.0.1 #邮件服务地址，端口是25
smtp_connect_timeout 30 #连接邮件服务器超时时间30秒
router_id keepalive21 #可以使用主机名
vrrp_mcast_group4 224.1.101.33 #设置多播地址，其他主机也一样
}
vrrp_instance VI_1 { #定义一个虚拟路由器，第一个
state BACKUP #当前状态，从的
interface ens33 #当前的vrp应用，绑定到那个网卡设备上
virtual_router_id 33#这个虚拟ip，与其他主机要保持一至
priority 96 #优先级，低于master主机
advert_int 1
authentication {
auth_type PASS #密码认证
auth_pass a1b2c3d4 #密码为8位,不能用默认的密码
}
virtual_ipaddress {#虚拟ip地址
192.168.1.99/24 dev ens33
}
}
vrrp_instance VI_2{ #定义一个虚拟路由器，第二个
state MASTER #当前状态，主的
interface ens33 #当前的vrp应用，绑定到那个网卡设备上
virtual_router_id 34#这个虚拟ip，与其他主机要保持一至
priority 100 #优先级，高于其他主机
advert_int 1
authentication {
auth_type PASS #密码认证
auth_pass a6b7c8d9 #密码为8位,不能用默认的密码，这里修改一下
}
virtual_ipaddress {#虚拟ip地址
192.168.1.99/24 dev ens33
}
}
virtual_server 192.168.1.99 80 {
delay_loop 1
lb_algo wrr
lb_kind DR
protocol TCP
sorry_server 127.0.0.1 80#故障页所在地址，本机所以要启动http
real_server 192.168.1.11 80 {
weight 1 #权重
HTTP_GET {
url {
path /index.html
status_code 200
}
nb_get_retry 3
delay_before_retry 2
connect_timeout 3
}
}
}
[root@keepalive22 ~]# systemctl start keepalived#启动keepalived
[root@keepalive22 ~]# ipvsadm -ln #查询ipvadm状态
IP Virtual Server version 1.2.1 (size=4096)
Prot LocalAddress:Port Scheduler Flags
-> RemoteAddress:Port Forward Weight ActiveConn InActConn
TCP 192.168.1.99:80 wrr
-> 192.168.1.11:80 Route 1 0 0
-> 192.168.1.12:80 Route 1 0 0
后端主机rs1设置
[root@rs1 ~]# yum -y install httpd
[root@rs1 ~]# vim /var/www/html/index.html #编辑首页
<h1>RS Server1</h1>
[root@rs1 ~]# vim setparam.sh
#!/bin/bash
#
vip=192.168.1.99
mask='255.255.255.255'
case $1 in
start)#开始设置值
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
ifconfig lo:0 $vip netmask $mask broadcast $vip up
route add -host $vip dev lo:0
#设置本地地址广播
;;
stop)#停止还原成0值
ifconfig lo:0 down
echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
;;
*)#其他
echo "Usage $(basename $0) start|stop"
exit 1
;;
esac
[root@rs1 ~]# bash -n setparam.sh #检测语法
[root@rs1 ~]# bash -x setparam.sh start#执行bash
[root@rs1 ~]# ifconfig
.....
lo:0: flags=73<UP,LOOPBACK,RUNNING> mtu 65536#添加成功
inet 192.168.1.99 netmask 255.255.255.255
loop txqueuelen 1 (Local Loopback)
[root@rs1 ~]# systemctl start httpd#启动httpd服务
后端主机rs2设置
[root@rs2 ~]# yum -y install httpd
[root@rs2 ~]# vim /var/www/html/index.html #编辑首页
<h1>RS Server2</h1>
[root@rs2 ~]# vim setparam.sh
#!/bin/bash
#
vip=192.168.1.99
mask='255.255.255.255'
case $1 in
start)#开始设置值
echo 1 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 1 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 2 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 2 > /proc/sys/net/ipv4/conf/lo/arp_announce
ifconfig lo:0 $vip netmask $mask broadcast $vip up
route add -host $vip dev lo:0
#设置本地地址广播
;;
stop)#停止还原成0值
ifconfig lo:0 down
echo 0 > /proc/sys/net/ipv4/conf/all/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_ignore
echo 0 > /proc/sys/net/ipv4/conf/all/arp_announce
echo 0 > /proc/sys/net/ipv4/conf/lo/arp_announce
;;
*)#其他
echo "Usage $(basename $0) start|stop"
exit 1
;;
esac
[root@rs2 ~]# bash -n setparam.sh #检测语法
[root@rs2 ~]# bash -x setparam.sh start#执行bash
[root@rs2 ~]# ifconfig
.....
lo:0: flags=73<UP,LOOPBACK,RUNNING> mtu 65536#添加成功
inet 192.168.1.99 netmask 255.255.255.255
loop txqueuelen 1 (Local Loopback)
[root@rs2 ~]# systemctl start httpd#启动httpd服务
客户主机测试：
- rs1、rs2全部启动http服务,节点1、节点2其中一个分别关闭keepalived服务：
[root@vs ~]# curl http://192.168.1.99#节点1和2分别停止服务不影响调度
<h1>RS Server2</h1>
[root@vs ~]# curl http://192.168.1.99
<h1>RS Server1</h1>
[root@vs ~]# curl http://192.168.1.99
<h1>RS Server2</h1>
[root@vs ~]# curl http://192.168.1.99
<h1>RS Server1</h1>
- 节点1、节点2全部启动keepalived服务,rs1、rs2其中一个分别停止http服务：
rs1停止http服务：
[root@vs ~]# curl http://192.168.1.99
<h1>RS Server2</h1>
[root@vs ~]# curl http://192.168.1.99
<h1>RS Server2</h1>
rs2停止http服务：
[root@vs ~]# curl http://192.168.1.99
<h1>RS Server1</h1>
[root@vs ~]# curl http://192.168.1.99
<h1>RS Server1</h1>
- rs1、rs2全部停止http服务,节点1、节点2其中一个分别关闭keepalived服务：
- 分别返回故障页面信息
节点1关闭keepalived服务：
[root@vs ~]# curl http://192.168.1.99
sorry server 2
[root@vs ~]# curl http://192.168.1.99
sorry server 2
节点2关闭keepalived服务：
[root@vs ~]# curl http://192.168.1.99
sorry server 1
[root@vs ~]# curl http://192.168.1.99
sorry server 1
