HandlerThread源码分析
/**
* Handy class for starting a new thread that has a looper. The looper can then be
* used to create handler classes. Note that start() must still be called.
* 带有Looper的线程,可以用来创建Handler,而且创建HanderThread后必须调用start().
*/
public class HandlerThread extends Thread {
int mPriority;
int mTid = -1;
Looper mLooper;
public HandlerThread(String name) {
super(name);
mPriority = Process.THREAD_PRIORITY_DEFAULT;
}
/**
* Constructs a HandlerThread.
* @param name
* @param priority The priority to run the thread at. The value supplied must be from
* {@link android.os.Process} and not from java.lang.Thread.
*/
public HandlerThread(String name, int priority) {
super(name);
mPriority = priority;
}
/**
* Call back method that can be explicitly overridden if needed to execute some
* setup before Looper loops.
*/
protected void onLooperPrepared() {
}
@Override
public void run() {
mTid = Process.myTid();
Looper.prepare();
synchronized (this) {
mLooper = Looper.myLooper();
//与wait()呼应,通知getLooper(),mLooper已经创建成功!
notifyAll();
}
Process.setThreadPriority(mPriority);
onLooperPrepared();
Looper.loop();
mTid = -1;
}
/**
* This method returns the Looper associated with this thread. If this thread not been started
* or for any reason is isAlive() returns false, this method will return null. If this thread
* has been started, this method will block until the looper has been initialized.
* @return The looper.
*/
public Looper getLooper() {
if (!isAlive()) {
return null;
}
// If the thread has been started, wait until the looper has been created.
synchronized (this) {
while (isAlive() && mLooper == null) {
try {
//由于Handler是在UI线程中创建,而Looper是在子线程中创建,所以必须要等待mLooper初始化完成,才能正确返回mLooper.
wait();
} catch (InterruptedException e) {
}
}
}
return mLooper;
}
/**
* Quits the handler thread's looper.
* <p>
* Causes the handler thread's looper to terminate without processing any
* more messages in the message queue.
* </p><p>
* Any attempt to post messages to the queue after the looper is asked to quit will fail.
* For example, the {@link Handler#sendMessage(Message)} method will return false.
* </p><p class="note">
* Using this method may be unsafe because some messages may not be delivered
* before the looper terminates. Consider using {@link #quitSafely} instead to ensure
* that all pending work is completed in an orderly manner.
* </p>
*
* @return True if the looper looper has been asked to quit or false if the
* thread had not yet started running.
*
* @see #quitSafely
*/
public boolean quit() {
Looper looper = getLooper();
if (looper != null) {
looper.quit();
return true;
}
return false;
}
/**
* Quits the handler thread's looper safely.
* <p>
* Causes the handler thread's looper to terminate as soon as all remaining messages
* in the message queue that are already due to be delivered have been handled.
* Pending delayed messages with due times in the future will not be delivered.
* </p><p>
* Any attempt to post messages to the queue after the looper is asked to quit will fail.
* For example, the {@link Handler#sendMessage(Message)} method will return false.
* </p><p>
* If the thread has not been started or has finished (that is if
* {@link #getLooper} returns null), then false is returned.
* Otherwise the looper is asked to quit and true is returned.
* </p>
*
* @return True if the looper looper has been asked to quit or false if the
* thread had not yet started running.
*/
public boolean quitSafely() {
Looper looper = getLooper();
if (looper != null) {
looper.quitSafely();
return true;
}
return false;
}
/**
* Returns the identifier of this thread. See Process.myTid().
*/
public int getThreadId() {
return mTid;
}
}
HandlerThread就是一个带有Looper的循环线程,解决了多次创建和销毁线程消耗资源的问题.HandlerThread的源码很简单,但是有几点需要注意:
- 使用notfiyAll()和wait()原因是因为: Handler创建是需要HanderThread线程中的Looper的,而Looper的创建在run()中,而我们知道当调用thread.start()后并不能保证run()立即执行了(异步调用),所以必须要等待mLooper的创建成功后,才能创建Handler,而notifyAll()与wait()正是保证了这点.
- quit()与quitSafely():一种是线程不安全,一种是线程安全的.
HandlerThread的用法在IntentService中得到体现:
/**
* IntentService is a base class for {@link Service}s that handle asynchronous
* requests (expressed as {@link Intent}s) on demand. Clients send requests
* through {@link android.content.Context#startService(Intent)} calls; the
* service is started as needed, handles each Intent in turn using a worker
* thread, and stops itself when it runs out of work.
*
* <p>This "work queue processor" pattern is commonly used to offload tasks
* from an application's main thread. The IntentService class exists to
* simplify this pattern and take care of the mechanics. To use it, extend
* IntentService and implement {@link #onHandleIntent(Intent)}. IntentService
* will receive the Intents, launch a worker thread, and stop the service as
* appropriate.
*
* <p>All requests are handled on a single worker thread -- they may take as
* long as necessary (and will not block the application's main loop), but
* only one request will be processed at a time.
*
* <div class="special reference">
* <h3>Developer Guides</h3>
* <p>For a detailed discussion about how to create services, read the
* <a href="{@docRoot}guide/topics/fundamentals/services.html">Services</a> developer guide.</p>
* </div>
*
* @see android.os.AsyncTask
*/
public abstract class IntentService extends Service {
private volatile Looper mServiceLooper;
private volatile ServiceHandler mServiceHandler;
private String mName;
private boolean mRedelivery;
private final class ServiceHandler extends Handler {
public ServiceHandler(Looper looper) {
super(looper);
}
@Override
public void handleMessage(Message msg) {
onHandleIntent((Intent)msg.obj);
stopSelf(msg.arg1);
}
}
/**
* Creates an IntentService. Invoked by your subclass's constructor.
*
* @param name Used to name the worker thread, important only for debugging.
*/
public IntentService(String name) {
super();
mName = name;
}
/**
* Sets intent redelivery preferences. Usually called from the constructor
* with your preferred semantics.
*
* <p>If enabled is true,
* {@link #onStartCommand(Intent, int, int)} will return
* {@link Service#START_REDELIVER_INTENT}, so if this process dies before
* {@link #onHandleIntent(Intent)} returns, the process will be restarted
* and the intent redelivered. If multiple Intents have been sent, only
* the most recent one is guaranteed to be redelivered.
*
* <p>If enabled is false (the default),
* {@link #onStartCommand(Intent, int, int)} will return
* {@link Service#START_NOT_STICKY}, and if the process dies, the Intent
* dies along with it.
*/
public void setIntentRedelivery(boolean enabled) {
mRedelivery = enabled;
}
@Override
public void onCreate() {
// TODO: It would be nice to have an option to hold a partial wakelock
// during processing, and to have a static startService(Context, Intent)
// method that would launch the service & hand off a wakelock.
super.onCreate();
HandlerThread thread = new HandlerThread("IntentService[" + mName + "]");
thread.start();
mServiceLooper = thread.getLooper();
mServiceHandler = new ServiceHandler(mServiceLooper);
}
@Override
public void onStart(Intent intent, int startId) {
Message msg = mServiceHandler.obtainMessage();
msg.arg1 = startId;
msg.obj = intent;
mServiceHandler.sendMessage(msg);
}
/**
* You should not override this method for your IntentService. Instead,
* override {@link #onHandleIntent}, which the system calls when the IntentService
* receives a start request.
* @see android.app.Service#onStartCommand
*/
@Override
public int onStartCommand(Intent intent, int flags, int startId) {
onStart(intent, startId);
return mRedelivery ? START_REDELIVER_INTENT : START_NOT_STICKY;
}
@Override
public void onDestroy() {
mServiceLooper.quit();
}
/**
* Unless you provide binding for your service, you don't need to implement this
* method, because the default implementation returns null.
* @see android.app.Service#onBind
*/
@Override
public IBinder onBind(Intent intent) {
return null;
}
/**
* This method is invoked on the worker thread with a request to process.
* Only one Intent is processed at a time, but the processing happens on a
* worker thread that runs independently from other application logic.
* So, if this code takes a long time, it will hold up other requests to
* the same IntentService, but it will not hold up anything else.
* When all requests have been handled, the IntentService stops itself,
* so you should not call {@link #stopSelf}.
*
* @param intent The value passed to {@link
* android.content.Context#startService(Intent)}.
*/
@WorkerThread
protected abstract void onHandleIntent(Intent intent);
}
IntentService是内部封装了HandlerThread和Handler,可以进行耗时操作的Service.
@Override
public void onCreate() {
// TODO: It would be nice to have an option to hold a partial wakelock
// during processing, and to have a static startService(Context, Intent)
// method that would launch the service & hand off a wakelock.
super.onCreate();
HandlerThread thread = new HandlerThread("IntentService[" + mName + "]");
thread.start();
mServiceLooper = thread.getLooper();
mServiceHandler = new ServiceHandler(mServiceLooper);
}
当IntentService第一次启动时,onCreate调用,创建HandlerThread,然后使用其Looper构建一个Handler对象mServiecHandler,这样就可以使用mServiceHanlder发送消息,并最终在HandlerThread中被处理,这样IntentService中就可以耗时操作的后台任务,在onStartCommand方法中处理每个后台任务的Intent.onStartCommand()调用了onStart(),onStart()方法实现如下:
@Override
public void onStart(Intent intent, int startId) {
Message msg = mServiceHandler.obtainMessage();
msg.arg1 = startId;
msg.obj = intent;
mServiceHandler.sendMessage(msg);
}
可以看出IntentService仅仅通过mServiceHandler发送了一个消息,并在HandlerThread中被处理,mServiceHandler收到消息后,将Intent对象传递给onHandlerIntent(),而这里的Intent对象与startService(intent)中对象一致,这样就可以处理具体不同的后台任务了. onHandlerIntent()处理任务结束后,会调用stopSelf(int startId)来尝试终止服务,这里不选择stopSelf()方法主要是考虑到:消息队列可能还有消息未能处理,stopSelf(startId)会等待所有消息都处理完成后再终止服务. ServiceHandler的源码如下:
private final class ServiceHandler extends Handler {
public ServiceHandler(Looper looper) {
super(looper);
}
@Override
public void handleMessage(Message msg) {
onHandleIntent((Intent)msg.obj);
stopSelf(msg.arg1);
}
}
由于每执行一个任务就必须要启动一次IntentService,而IntentService内部通过HandlerThread执行任务,Handler中的Looper是顺序处理消息的,这意味着IntentService也是顺序请求后台任务的.当有多个后台任务同时存在时,这些任务会按照外界发送的顺序被执行.
