参考
- https://tensorflow.google.cn/install/install_linux
- http://nvidia.com/cuda
- http://developer.nvidia.com/cudnn
说明
- 前提是机器上必须有Nvidia显卡，不太老就好（古董也没必要玩这个了吧，费电），在Nvidia官网可以查到显卡支持情况
https://developer.nvidia.com/cuda-gpus - 安装过程中的命令都需要root身份，请使用su root切换或者每次加 sudo，编译运行测试代码使用普通用户就好
踩坑后的提示，怪我眼瞎坑自己,[手动抽脸表情]
- 必须按tensorflow 官网提示的版本安装 1.9 对应 CUDA 9.0，CUDA 9.0 要下载相应版本的cuDNN
- 如果喜欢折腾，建议使用没有重要数据的硬盘
- 安装包最好下载到其他电脑上，使用scp拷贝到安装机上，重装了几遍ubuntu，下一次包就2个G，作为联通40G所谓无线流量卡用户，想着还是蛋疼
下载主要安装文件
- CUDA® 工具包
#http://nvidia.com/cuda
#我选的是16.04的run文件，其他的坑不敢踩了
cuda_9.0.176_384.81_linux.run
- cuDNN 深度神经网络（DNN）开发环境，需要网站注册
#http://developer.nvidia.com/cudnn
libcudnn7-dev_7.1.4.18-1+cuda9.0_amd64.deb
libcudnn7_7.1.4.18-1+cuda9.0_amd64.deb
libcudnn7-doc_7.1.4.18-1+cuda9.0_amd64.deb
准备环境
看CUDA自带的驱动版本，这里是384.81，低于这个版本就要先卸载，>= 跳过
#建议run文件卸载，即你之前下载的Nvidia驱动run文件
chmod +x *.run
./NVIDIA-Linux-x86_64-384.59.run --uninstall
# 不建议采取这种，不知道为什么没尝试过
apt-get remove --purge nvidia*
禁用自带的nouveau驱动，如果你连Nvidia驱动都装过了，这一步也免了
vi /etc/modprobe.d/blacklist.conf
#加两行
blacklist nouveau
options nouveau modeset=0
#生效配置
update-initramfs -u
#重启，后分辨率变低了，毕竟没有显卡驱动了
reboot
#检查是否生效
lsmod | grep nouveau
#如果屏幕没有输出则禁用nouveau成功
安装必要的编译环境否者自带网卡驱动安装不上
apt install gcc g++ make make-guile
针对CUDA 9.0，必须将GCC降级为gcc5，也是安装CUDA时发现的
apt install gcc-5 g++-5
update-alternatives --install /usr/bin/gcc gcc /usr/bin/gcc-5 50
update-alternatives --install /usr/bin/g++ g++ /usr/bin/g++-5 50
安装 CUDA® 工具包
一定要根据tensorflow版本安装对应版本的CUDA 1.9对应9.0，被自己眼瞎害的
chmod +x cuda_9.0.176_384.81_linux.run
sh ./cuda_9.0.176_384.81_linux.run
#会有说明，需要看的自己看，看了几页不想看/条款看不懂的 按q键
- 如果安装过程中提示失败，根据提示查看log排错
- 安装成功后的log
Do you accept the previously read EULA?
accept/decline/quit: accept
You are attempting to install on an unsupported configuration. Do you wish to continue?
(y)es/(n)o [ default is no ]: y
#这里384.81表示显卡驱动版本，如果本机安装的显卡驱动版本比它高就不需要安装
#选no主要是前面踩坑的时候安了CUDA9.2，呵呵
#正常应该是yes
Install NVIDIA Accelerated Graphics Driver for Linux-x86_64 384.81?
(y)es/(n)o/(q)uit: n
Install the CUDA 9.0 Toolkit?
(y)es/(n)o/(q)uit: y
Enter Toolkit Location
[ default is /usr/local/cuda-9.0 ]:
Do you want to install a symbolic link at /usr/local/cuda?
(y)es/(n)o/(q)uit: y
Install the CUDA 9.0 Samples?
(y)es/(n)o/(q)uit: y
Enter CUDA Samples Location
[ default is /root ]:
Installing the CUDA Toolkit in /usr/local/cuda-9.0 ...
Missing recommended library: libGLU.so
Missing recommended library: libX11.so
Missing recommended library: libXi.so
Missing recommended library: libXmu.so
Missing recommended library: libGL.so
Installing the CUDA Samples in /root ...
Copying samples to /root/NVIDIA_CUDA-9.0_Samples now...
Finished copying samples.
===========
= Summary =
===========
Driver: Not Selected
Toolkit: Installed in /usr/local/cuda-9.0
Samples: Installed in /root, but missing recommended libraries
Please make sure that
- PATH includes /usr/local/cuda-9.0/bin
- LD_LIBRARY_PATH includes /usr/local/cuda-9.0/lib64, or, add /usr/local/cuda-9.0/lib64 to /etc/ld.so.conf and run ldconfig as root
To uninstall the CUDA Toolkit, run the uninstall script in /usr/local/cuda-9.0/bin
Please see CUDA_Installation_Guide_Linux.pdf in /usr/local/cuda-9.0/doc/pdf for detailed information on setting up CUDA.
***WARNING: Incomplete installation! This installation did not install the CUDA Driver. A driver of version at least 384.00 is required for CUDA 9.0 functionality to work.
To install the driver using this installer, run the following command, replacing <CudaInstaller> with the name of this run file:
sudo <CudaInstaller>.run -silent -driver
Logfile is /tmp/cuda_install_7657.log
/root/NVIDIA_CUDA-9.0_Samples
设置环境变量
vi /etc/ld.so.conf.d/cuda.conf
#写入两行
/usr/local/cuda/lib64
/usr/local/cuda/extras/CUPTI/lib64
vi /etc/profile
#加入两行
export CUDA_HOME=/usr/local/cuda/bin
export PATH=$PATH:$CUDA_HOME
重启 reboot
测试安装情况
- 没有报错就表示安装成功
cd /root/NVIDIA_CUDA-9.0_Samples/samples/1_Utilities/deviceQuery
make
./deviceQuery
# Result = PASS 成功
cd ../bandwidthTest
make
./bandwidthTest
#Result = PASS 成功
cuDNN 安装
NVIDIA cuDNN is a GPU-accelerated library of primitives for deep neural networks.
#cuDNN v7.1.4 Runtime Library for Ubuntu16.04 (Deb)
dpkg -i libcudnn7_7.1.4.18-1+cuda9.0_amd64.deb
#cuDNN v7.1.4 Developer Library for Ubuntu16.04 (Deb)
dpkg -i libcudnn7-dev_7.1.4.18-1+cuda9.0_amd64.deb
#cuDNN v7.1.4 Code Samples and User Guide for Ubuntu16.04 (Deb)
libcudnn7-doc_7.1.4.18-1+cuda9.0_amd64.deb
# 锁定版本，免得自动更新破坏环境
apt-mark hold libcudnn7 libcudnn7-dev
测试
#Copy the cuDNN sample to a writable path.
$cp -r /usr/src/cudnn_samples_v7/ $HOME
#Go to the writable path.
$ cd $HOME/cudnn_samples_v7/mnistCUDNN
#Compile the mnistCUDNN sample.
$make clean && make
#Run the mnistCUDNN sample.
$ ./mnistCUDNN
#If cuDNN is properly installed and running on your Linux system, you will see a message similar to the following:
#Test passed!
安装 tensorflow-gpu 以python3为例
sudo apt-get install python3-pip python3-dev
pip3 install tensorflow-gpu
测试安装
#测试代码，保存到比如test.py
import tensorflow as tf
hello = tf.constant('Hello, TensorFlow!')
sess = tf.Session()
print(sess.run(hello))
#执行 python3 test.py
#第一次有点慢
#没报错，有显卡信息，b'Hello, TensorFlow!'，表示成功
