客户部分场合下需要使用胖AP模式进行网络安装。特提供以下操作说明文档指导现场实施人员进行设备调整。
1.准备工具
1.Console调试线：与AP设备的console接口连接
2.电脑
3.poe交换机：给AP供电
2.超级终端配置
端口参数如下：
通过FTP软件升级过程
设备正常启动后，使用超级终端或者CRT软件进入指令界面。
3.1配置网络设备IP
电脑配置IP地址：192.168.1.3/24，AP设备配置IP地址：192.168.1.2/24
配置过程
<WA2610E-F>sys
[WA2610E-F]int vlan 1
[WA2610E-F-Vlan-interface1]
[WA2610E-F-Vlan-interface1]ip add 192.168.1.2 24
检查设备IP配置：
[WA2610E-F-Vlan-interface1]dis this
#
interface Vlan-interface1
ipv6 address auto
ip address 192.168.1.2 255.255.255.0
ipv6 address dhcp-alloc
#
return
检查网络通畅性：
ping 192.168.1.3
3.2删除原有版本程序
由于设备存储空间有限，需要删除原有程序版本。注：wa2600a_fit.bin为瘦AP版本，wa2600a_fat.bin为胖AP版本。
<WA2610E-F>dir//查看设备使用的软件版本
Directory of flash:/
0 -rw- 7396352 Aug 08 2008 20:00:00 wa2600a_fit.bin
15057 KB total (7831 KB free)
<WA2610E-F>delete /unreserved wa2600a_fit.bin//删除设备版本
The contents cannot be restored!!! Delete flash:/wa2600a_fit.bin?[Y/N]:y
Deleting a file permanently will take a long time.
Please wait................................................................................................................................
%Delete file flash:/wa2600a_fit.bin...Done.
3.3电脑开启FTP软件
电脑使用3CDaemon.EXE软件，开启FTP服务器。
FTP服务器软件配置使用：
用户名、密码设置：“用户名称”输入用户名；“设置/改变用户口令”点击，修改用户密码
用户目录：选择软件版本保存的文件夹名称。
CRT或者超级终端操作步骤：
输入用户名、密码和3CDaemon.EXE软件中配置的一致。
ftp 192.168.1.3 //FTP连接电脑
Trying 192.168.1.3 ...
Press CTRL+K to abort
Connected to 192.168.1.3.
220 3Com 3CDaemon FTP 服务器版本 2.0
User(192.168.1.3:(none)): admin
331 用户名正确, 需要口令
Password://此处输入密码不显示
230 用户已登录
[ftp]
[ftp]dir//查看软件版本是否存在
227 正在进入被动模式 (192,168,1,3,214,24)
125 正在使用现存的数据连接
drwxrwxrwx 1 owner group 0 Nov 10 09:18 .
drwxrwxrwx 1 owner group 0 Nov 10 09:18 ..
-rwxrwxrwx 1 owner group 408332 Nov 10 09:18 apwa26xx_v3.03.btw
-rwxrwxrwx 1 owner group 29648 Nov 10 09:18 readme.docx
-rwxrwxrwx 1 owner group 16777216 Nov 10 09:18 WA2600A-CMW520-R1308P10-FAT-IMAGE.bin
-rwxrwxrwx 1 owner group 9090048 Nov 10 09:18 wa2600a_fat.bin
-rwxrwxrwx 1 owner group 7436288 Jul 04 11:05 wa2600a_fit.bin
226 正在关闭数据连接
FTP: 449 byte(s) received in 0.106 second(s), 4.00K byte(s)/sec.
[ftp]
[ftp]
[ftp]bin //修改FTP文件传输模式
200 类型设置为 I.
[ftp]get wa2600a_fat.bin ?
STRING<1-135> Local file name [drive][path][file name]
[ftp]get wa2600a_fat.bin //下载软件版本
[ftp]get wa2600a_fat.bin
flash:/wa2600a_fat.bin has been existing. Overwrite it? [Y/N]:y
227 正在进入被动模式 (192,168,1,3,214,43)
125 正在使用现存的数据连接
....
传输完成之后
[ftp]
[ftp]
[ftp]quit
3.4配置设备下次启动文件
在进行此操作之前请不要出现断电的情况。
操作流程：
boot-loader file wa2600a_fat.bin
Verifying boot file ......
This command will set the boot file. Continue? [Y/N]:y
The specified file will be used as the boot file at the next reboot on slot 1!
dis boot-loader //检查程序版本是否正确
The current boot app is: flash:/wa2600a_fat.bin
The app that will boot upon reboot is: flash:/wa2600a_fat.bin
如果正确升级完成，设备断电重启。
通过启动菜单升级软件过程
(1) 重启设备，在配置终端的屏幕上首先将显示：
System is starting...
Press Ctrl+D to access BASIC-BOOTWARE MENU
Booting Normal Extend BootWare..
The Extend BootWare is self-decompressing........................Done!
****************************************************************************
* *
* H3C WA3620i-AGN BootWare, Version 2.01 *
* *
****************************************************************************
Copyright (c) 2004-2013 Hangzhou H3C Technologies Co., Ltd.
Compiled Date : Jan 23 2013
CPU Type : P1011
CPU L1 Cache : 32KB
CPU L2 Cache : 512KB
CPU Clock Speed : 800MHz
Memory Type : DDR3 SDRAM
Memory Size : 256MB
Memory Speed : 667MHz
Flash Size : 32MB
CPLD Version : 003
PCB Version : Ver.A
BootWare Validating...
Press Ctrl+B to enter extended boot menu..
(2) 5秒内按下Ctrl+B，进入BootWare主菜单，出现提示用户输入密码时，用户直接输入，跳过。
Password recovery capability is Enabled.
Note: The current operating device is cfa0
Enter < Storage Device Operation > to select device.
============================================
|<1> Boot system |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================ Ctrl+Z: Access EXTEND-ASSISTANT MENU
Ctrl+F: Format File System
Enter your choice(0-9):3
(3) 按下3，进入BootWare网络参数配置菜单。
==============================================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
===========================================================================Enter your choice(0-5): 5
(4) 按下5，进入BootWare升级参数配置菜单。菜单中显示的是默认参数。直接输入用户需要参数，按下进行下一个参数输入。
===============================================
|Note: '.' = Clear field. |
| '-' = Go to previous field. |
| Ctrl+D = Quit. |
============================================================================
Protocol (FTP or TFTP) :tftp ftp
Load File Name :host wa2600a_fat.bin
Target File Name :target wa2600a_fat.bin
Server IP Address :192.168.1.1 192.168.1.1 (本机IP地址)
Local IP Address :192.168.1.253 192.168.1.253（同网段地址）
Gateway IP Address :0.0.0.0
FTP User Name :user admin
FTP User Password :password 123456
(5) 开启FTP服务器。按下2,直接参数。
================================================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-5): 2
Loading.......................................................................Done!
9110528 bytes downloaded!
Updating File flash:/wa2600a_fat.bin.................................................................................................................................................Done!
(6) 升级完成检查。推出到主菜单，按下4进入File Control菜单选项，按下1显示当前程序状态。
================================================
|Note:the operating device is flash |
|<1> Download Application Program To SDRAM And Run |
|<2> Update Main Application File |
|<3> Update Backup Application File |
|<4> Update Secure Application File |
|<5> Modify Ethernet Parameter |
|<0> Exit To Main Menu |
| |
============================================================================
Enter your choice(0-5): 0
==================================================
|<1> Boot System |
|<2> Enter Serial SubMenu |
|<3> Enter Ethernet SubMenu |
|<4> File Control |
|<5> Restore to Factory Default Configuration |
|<6> Skip Current System Configuration |
|<7> BootWare Operation Menu |
|<8> Clear Super Password |
|<9> Storage Device Operation |
|<0> Reboot |
============================================================================
Ctrl+C: Display Copyright
Ctrl+F: Format File System
Enter your choice(0-9): 4
==========================================================
====
|Note:the operating device is flash |
|<1> Display All File(s) |
|<2> Set Application File type |
|<3> Delete File |
|<0> Exit To Main Menu |
============================================================================
Enter your choice(0-3): 1
Display all file(s) in flash:
'M' = MAIN 'B' = BACKUP 'S' = SECURE 'N/A' = NOT ASSIGNED
============================================================================
|NO. Size(B) Time Type Name |
|1 9110528 Aug/08/2008 20:00:00 M wa2600a_fat.bin |
|2 388 Jan/01/2009 00:11:26 N/A private-data.txt |
|3 1297 Jan/01/2009 00:11:32 N/A startup.cfg |
|4 455 Jan/01/2009 00:11:29 N/A system.xml |
============================================================================
如上显示，程序版本为：wa2600a_fat.bin。类型为M（表示下次启动的程序版本）。
