2.1 问题
修改交换机主机名
查看交换机VRP版本
查看交换机配置
使用账户和密码登录终端
保存交换机的配置
恢复设备出厂默认值
2.2 方案
在eNSP程序主窗口中，添加一台s3700交换机，进入交换机，输入相关命令进行配置和查看交
换机
2.3 步骤
实现此案例需要按照如下步骤进行
步骤一：修改交换机主机名
进入系统视图后，使用sysname指令可以为交换机设置主机名。例如，以下操作可以将主机名设
置为SW1
步骤二：显示VRP版本
步骤三：查看交换机配置
查看ios名称及版本信息
01. <Huawei>system-view
02. [Huawei]sysname SW1
03. [SW1]
01. [Huawei]display version
02. Huawei Versatile Routing Platform Software
03. VRP (R) software, Version 5.110 (S3700 V200R001C00)
04. Copyright (c) 2000-2011 HUAWEI TECH CO., LTD
05.
06. Quidway S3700-26C-HI Routing Switch uptime is 0 week, 0 day, 0 hour, 17 minutes
01. [Huawei]display current-configuration
02. #
03. sysname Huawei
04. #
05. cluster enable
06. ntdp enable
07. ndp enable
08. #
09. drop illegal-mac alarm
10. #
11. diffserv domain default
12. #
13. drop-profile default
14. # Top
步骤四：使用账户和密码登录终端
步骤五：保存交换机的配置
步骤六：恢复设备出厂默认值
01. <Huawei>system-view
02. [Huawei]aaa //进入aaa认证
03. [Huawei-aaa]local-user admin01 password cipher 123 //创建账户叫admin01,密码123
04. [Huawei-aaa]quit
05. [Huawei]user-interface console 0
06. [Huawei-ui-console0]authentication-mode aaa //激活配置
01. <Huawei>save
02. The current configuration will be written to the device.
03. Are you sure to continue?[Y/N]y //这里按y确认
04. Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]:
05. Mar 12 2019 19:12:18-08:00 Huawei %%01CFM/4/SAVE(l)[0]:The user chose Y when dec
06. iding whether to save the configuration to the device.
07. Now saving the current configuration to the slot 0.
08. Save the configuration successfully.
01. <Huawei>reset saved-configuration //重置配置文件
02. Warning: The action will delete the saved configuration in the device.
03. The configuration will be erased to reconfigure. Continue? [Y/N]:y //是否擦除，回答y
04. Warning: Now clearing the configuration in the device.
05. Mar 12 2019 19:13:50-08:00 Huawei %%01CFM/4/RST_CFG(l)[1]:The user chose Y when
06. deciding whether to reset the saved configuration.
07. Info: Succeeded in clearing the configuration in the device.
08.
09. <Huawei>reboot //重启设备
10. Info: The system is now comparing the configuration, please wait.
11. Warning: All the configuration will be saved to the configuration file for the n
12. ext startup:, Continue?[Y/N]:n //提示是否再次保存，选择n
13. Info: If want to reboot with saving diagnostic information, input 'N' and then e
14. xecute 'reboot save diagnostic-information'.
15. System will reboot! Continue?[Y/N]:y //是否重启，选择y
